suzuki Posted January 28, 2014 Posted January 28, 2014 L312b560 4670k -doesn't boot at 4800 mhz with 1.35v. 3334B905 4770k -4900 @1.35v ,further testing is irrelevant ,doesn't boot at 5 ghz@ 1.45. The 4770k it's low volt somehow,it is stable IBT 4600 mhz@ 1.23v. Quote
Behzad Tak Posted January 28, 2014 Posted January 28, 2014 4670k L314B011 boot at 5025 mhz with 1.31v water, pass 01 & HWBOT Prime, Quote
Moose83 Posted January 29, 2014 Posted January 29, 2014 My 6.3 3DM06 4670k does 4.8 1.27V Aircoold 3DM06 Just a direction Quote
Behzad Tak Posted January 29, 2014 Posted January 29, 2014 My 4670k pass 4.8 1.25v 3DM06 but max pass ln2 6gh 3DM06 (CB -110) Quote
Doug2507 Posted January 29, 2014 Posted January 29, 2014 My 4770k does 4.8 <1.25V Aircooled 3DM06. Never been on cold yet! Quote
Moose83 Posted January 29, 2014 Posted January 29, 2014 My 4670k pass 4.8 1.25v 3DM06 but max pass ln2 6gh 3DM06 (CB -110) That shows again, Hassfail can everything Every Hassfail has its own way to surprise users when using it lolol:D Quote
nfszocker Posted January 29, 2014 Posted January 29, 2014 New Batch: L333B980 #4325 Stock VID Turbo off= 1,008V Quote
superV Posted January 30, 2014 Posted January 30, 2014 hi all i'm new .i'm looking for 4770k stable at 5ghz.if somebody have one pm me or tell me where to get a good batch.i was thinkin of amazon but who knows...i need to play battlefield 4 online.thanks Quote
thanostc Posted January 30, 2014 Posted January 30, 2014 Hi to all! I just bought a 4770k cpu and the batch number seems to be very new so i can't find any info for that... the batch number is L336C743 MALAY... is there any info if this will be a good chip? Unfortunately i don't have the MB yet so i can't post any default metrics... Quote
Doug2507 Posted January 30, 2014 Posted January 30, 2014 SuperV - No chip from any batch is guaranteed to be good, especially good enough to run 5Ghz stable for gaming. thanostc - Same. Not all chips from the same batch will be good. Some will be absolute dogs, some maybe will be good, most will be average! The only way to find out how your chip does is to run it and find out! Best of luck and hope you have a good one! Quote
thanostc Posted January 30, 2014 Posted January 30, 2014 SuperV - No chip from any batch is guaranteed to be good, especially good enough to run 5Ghz stable for gaming. thanostc - Same. Not all chips from the same batch will be good. Some will be absolute dogs, some maybe will be good, most will be average! The only way to find out how your chip does is to run it and find out! Best of luck and hope you have a good one! Thank you very much for your absolutely quick response! Quote
superV Posted January 30, 2014 Posted January 30, 2014 i asked one seller and he will provide me next week all his batch codes.now you say that batch doesnt matter cuz you can get same batch 1 do 5 ghz and 2nd 4.5 only. Quote
Wizerty Posted February 3, 2014 Posted February 3, 2014 (edited) Pre-bin 12 chip yesterday, on hot air : M6 Impact, bios full auto except Vcore and coef. I took note, so I can tell you more detail later. this is what I remember... Test 1 : vid Test 2 : vcore min @4.5Ghz wprime32M Test 3 : 1.3v, freq max wprime 32M Test 4 : T° @1.3v 4.5Ghz L310... 1.02v // 1.2v // 4.7 // 86°C L315... 0.9xx // 1.12 // 4.8 // 88° L317... 1.04v // 1.17 // 4.8 // 81°C L333B : 2 chip can 4.5Ghz (Wprime) with 1.2v or less L333B : 1 chip can 4.5Ghz (Wprime)with 1.25v L333B : 6 chip can 4.5G (Wprime) with 1.3v ----------- L333B : better VID 1.008v -> 1.3V for 4.5Ghz L333B : low vo (less than 1.2v for 4.5Ghz) -> 1.04/1.05 VID L333B : best chip (1.15v for 4.5G) heat more ( 81°C for 4.5G @1.3v) L333B ; worst chip (1.3v for 4.5G) heat less (74°C for 4.5G @1.3v) Show exact data in chart latter More detail later Edited February 3, 2014 by Wizerty Quote
carlinyos18 Posted February 3, 2014 Posted February 3, 2014 that vid is @3,5Ghz or @3,9 with turboboost enabled? Quote
Wizerty Posted February 3, 2014 Posted February 3, 2014 vid is stock, when you boot after clear bios. I made a news test, same cpu (L317b), but better cooler + gelid instead of old cooler + EVGA tim... Before : 81°c, after 70° Before : less than 4.7, after 4850 Quote
slaske6 Posted February 4, 2014 Posted February 4, 2014 got a new one . http://peecee.dk/upload/view/431185 on water 5gh 32m stabel 2/8 1,2 vcore and 4/4 1.225 4/8 1.25 on water Quote
Calathea Posted February 5, 2014 Posted February 5, 2014 (edited) I wil try this chip on LN2 soon: L317B782 1.30 Boot XP 4c/8t 5 GHz, 1.35 for 32M. 5830 1M, 5750 32M on same cooling, LD Singlestage -55. Wish me luck! edit: LN2 6,6 GHz valid @ 1.82 vcore CB -122. http://hwbot.org/submission/2499095_ Edited February 11, 2014 by Calathea Quote
Crew Vivi Posted February 10, 2014 Crew Posted February 10, 2014 I wil try this chip on LN2 soon: L317B782 1.30 Boot XP 4c/8t 5 GHz, 1.35 for 32M. 5830 1M, 5750 32M on same cooling, LD Singlestage -55. Wish me luck! excellent cpu! goodluick Quote
Calathea Posted February 11, 2014 Posted February 11, 2014 excellent cpu! goodluick Thanks Vivi. It turned out ok, max valid 6,6 GHz. http://hwbot.org/submission/2499095_ Not stable at all though, maybe I can make 1M at 6,4. Quote
MikeV Posted February 13, 2014 Posted February 13, 2014 Do we have any information about these 4770K Batch numbers? L334B836 L333B990 Quote
ObscureParadox Posted February 14, 2014 Posted February 14, 2014 what do people regard as a good VID then, mine has a vid of 1.064V and it isn't the best to say the least. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.