l0ud_sil3nc3 Posted May 22, 2013 Share Posted May 22, 2013 Quote Link to comment Share on other sites More sharing options...
jjjc Posted May 22, 2013 Share Posted May 22, 2013 lmao Quote Link to comment Share on other sites More sharing options...
zzolio Posted May 22, 2013 Share Posted May 22, 2013 how did you get CL7 to performing on mpower I've tried unsuccessfully Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 22, 2013 Author Share Posted May 22, 2013 Set tWCL to 6, and make sure to run the slots closest to the cpu. Quote Link to comment Share on other sites More sharing options...
Eeky NoX Posted May 22, 2013 Share Posted May 22, 2013 Ahah! Yes always set tWCL 1 under Cas Zzolio. Good tip for slot Loud, it would save time. And great chip you have there (not my case unfortunatly...) Quote Link to comment Share on other sites More sharing options...
zzolio Posted May 22, 2013 Share Posted May 22, 2013 thanks I bought new cpu hopes it can more than the old will try them on ln2 this weekend Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 22, 2013 Author Share Posted May 22, 2013 Thanks guys! Quote Link to comment Share on other sites More sharing options...
Calathea Posted May 22, 2013 Share Posted May 22, 2013 wow is that cl7 twcl 6 on air? Quote Link to comment Share on other sites More sharing options...
Hazzan Posted May 22, 2013 Share Posted May 22, 2013 killer efeciency George...awesome result Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 22, 2013 Author Share Posted May 22, 2013 @ Calathea yup all on air, 1.88v I found out tWCL 7 is broken and slow, like many things on the MPower lol @ Hazzan thanks bro, there's a bit left in it I think as the mount was pretty bad upon tear down, will revisit. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted May 22, 2013 Crew Share Posted May 22, 2013 How does it work out with Hynix rams ? got these prety tight at 2600C10 on the Mpower during the review testing Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 22, 2013 Author Share Posted May 22, 2013 How does it work out with Hynix rams ? got these prety tight at 2600C10 on the Mpower during the review testing Have no idea Leeg, I have all this nice BFR, CFR and MFR and no desire to run it lol. I was thinking Samsung, but the RipZ kit worked so well I was hard pressed to remove it especially with the -110c cbb coupled with the fact that all clocks were booted from the bios as my OS does not support ME installation. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted May 22, 2013 Crew Share Posted May 22, 2013 I had a terrible time with the newer biosses and my 2666C10 kit. Ram dividers broken, had to clock up from 2400 or 2600 divider (don't recall exactly). But the Corsair and G.Skill 2800C11 kits went quite nice. Anyway good luck mate in the competition, kick ass CPU ! Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 22, 2013 Author Share Posted May 22, 2013 I had a terrible time with the newer biosses and my 2666C10 kit. Ram dividers broken, had to clock up from 2400 or 2600 divider (don't recall exactly). But the Corsair and G.Skill 2800C11 kits went quite nice. Anyway good luck mate in the competition, kick ass CPU ! Thanks Albrecht, hopefully the twin backup cpu that clocks identical on air, is just as menacing on cold:D Quote Link to comment Share on other sites More sharing options...
Eeky NoX Posted May 22, 2013 Share Posted May 22, 2013 ...hopefully the twin backup cpu that clocks identical on air, is just as menacing on cold:D I could say near to the same: "...desperatly the twin backup cpu that clocks identical on air, should suck on cold too" finish me plz Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 22, 2013 Author Share Posted May 22, 2013 I could say near to the same: "...desperatly the twin backup cpu that clocks identical on air, should suck on cold too" finish me plz lmao both same batch, 5Ghz 32M <1.31v 4c 4t:) Will retest later today when the new card gets here. Quote Link to comment Share on other sites More sharing options...
Eeky NoX Posted May 22, 2013 Share Posted May 22, 2013 So nice! Malay or Costa? Pretests of both mines stopped @1.53v... brown hands, but deeply dark ones Cya in semi final! (if no suicide of hw or myself lol) Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted May 22, 2013 Author Share Posted May 22, 2013 So nice! Malay or Costa? Pretests of both mines stopped @1.53v... brown hands, but deeply dark ones Cya in semi final! (if no suicide of hw or myself lol) All Costa over here and quite the opposite of brown hand I think lol. I usually pick winners like you when it comes to binning Ivy, but I guess I got lucky this time. Quote Link to comment Share on other sites More sharing options...
coolhand411 Posted May 27, 2013 Share Posted May 27, 2013 Mr. amazing...I'm happy for you man Quote Link to comment Share on other sites More sharing options...
Splave Posted May 28, 2013 Share Posted May 28, 2013 drop the 4min already Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.