-
Posts
2264 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Forums
Events
Blogs
Everything posted by yosarianilives
-
Eh my cvf forgot how to mem. Was having issues running higher vdimm or running good mem settings for the past month then this last weekend it started refusing to post with any mem. It seems that boards just wear out after a while. Got many good SS sessions out of my cvf before that though, and my understanding is that sabertooth had done very well in a few ln2 sessions before it became a dice only board.
-
Golden 4790k, G3258, G.Skill TridentX 3000C12 2x4GB DDR3
yosarianilives replied to aerotracks's topic in Sold
There is no love, only pure hatred. On the plus side it saved me some money as I have zero desire to own one now. I'll stick to the m7i, a much better board. -
LN2 at -50 to -60c on sandy for a 45 minute run ? I could see it helping mem tho, so theoretically could be useful for timings. Did you use hypers? I had no luck with them on sandy myself. I couldn't set as tight of tertiary timings as on PSC so my score ended up taking a hit despite tighter primaries.
-
Yes, wasted a lot of LN2 troubleshooting last weekend it before we determined that it was a board issue.
-
Just disable hwinfo, it won't fill in anything.
-
Perhaps sabertooth boards just have issues? This last weekend on sabertooth we were having issue across multiple cpus, am3 and am3+, where it had a CBB at -80c. Basically you could boot into bios, pull down, then boot into OS. However if it failed to run the settings or you needed to reboot from the OS you would need to pull up to around -80c to get it to POST at all.
-
Yeah seems that zosma Athlons are the binning rejects out of the the binning rejects. I wonder how much cache influences the weakness of the cores as normally there is no l3 cache active on the 640s however it gets unlocked when I unlock the cores up to 6. I still have a few more on the way and hopefully there is a decent on otherwise our third score for that stage may be on a quad.
-
Unlocking multiplier on Phenom II?
yosarianilives replied to yosarianilives's topic in AMD Thuban OC
Just found this article here, is it possible that there's more to unlocking multiplier than most people know? Seems like in this link it was all cpus on a certain mobo with a certain bios. If there's a way to reliably unlock multiplier on locked AM3 chips could mean a lot for things like 1 core records. -
Interesting, I've always run my hypers at 2v on am3 and they seemed to like it. Was able to do 1760 6-6-5-22 1t that way with hypers on air, cpu on ss. Although lately my cvf has been unhappy with high vdimm so perhaps there's something to lower vdimm.
-
Prepping for rtx 2000 series
-
AFAIK the limit on deneb based chips is around 1866ish and the limit on thuban based chips is 2133ish. To help your mem you obviously need to adjust cpunb voltage as this is also for the chipset, although you also don't want to punch it as it can have negative scaling. The range is 1.3-1.55v. On ambient probably best to be sub 1.5v or even 1.45v. Also I've found that a voltage named vddr (not familiar with civf bios but this is present in cvf bios) can help at times. Not sure how it can be set safely on ambient but on ss it helped to max it (around 1.8ish). Also I'm sure that you're already running your hypers at 2v but always a good thing to remember, am3 "Ddr3" controller may as well be ddr2 controller as far as voltage tolerances so you can shove as much volts as the mem continues to scale to. (usually 2v for hypers on ambient) Not sure if this helps but I hope its useful.
-
Wouldn't trade this chip, lol. Didn't even have to bin for it. Bought it for $100 pre ryzen launch because of bent pins and just remembered that it did 4.9 on 1.37v on aio when looking at what hw I had for the all amd Ddr3 stage of tc. (hit temp limits because leaky, my 8320 ran same temps at 1.45v on same cooler)