-
Posts
4290 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Everything posted by knopflerbruce
-
Bug ranking category
knopflerbruce replied to vadimua's topic in HWBOT Development: bugs, features and suggestions
Fixed? -
HWSW and AloneWolf using same system?
knopflerbruce replied to ObscureParadox_3XS's topic in HWBOT OC-Crime Center
Seems like this one was forgotten looking into it again. -
Videocard specifications requests : evga "2Win" GPUs
knopflerbruce replied to K404's topic in Support
+1, they're not the same as an SLI setup. 9800gx2, 4870x2, the list goes on -
Doubtful AMD Socket A submissions from RIBEIROCROSS
knopflerbruce replied to Antinomy's topic in HWBOT OC-Crime Center
I believe an email has been sent, we're just waiting for a reply. -
I have an abit ic7 max3 But that one won't run willamettes. Plus, I kind of like this board - at least a little bit.
-
I don't seem to find a reference to that mobo
-
So, 478 mobo #2 ASUS P4C800 Deluxe. Same PCB as the two other boards in this series. Found vdroop/vdroop/vmem for the -E Deluxe one, I suppose they work here as well, if I feel like trying. I see there are alot of missing parts in the CPU socket area, so I guess I can add a few things (some are present on the "-E" board). Also, cap replacement could be a good idea? I don't know if I have droop issues, but the core voltage is all over the place - this could be due to bad caps I suppose. Large, green caps are d10, and say (M)105C, 3171, 2a, KZE 1200µF, 16v. Smaller, purple/gold ones are d8 I think. Maybe d7. These ones say 105C, 0309, RLX, 6.3V, 1500µF. Chip inside CPU socket measured 4.3mm x 7.3mm and say 2V100 S2241 MOSFETs seem to follow a pattern, where one spot is always empty, one says 13N03LA and one says (I think) 0GN03LA. Pictures attached. Not sure if the back of the board is useful in this case.
-
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
I'm making a p4c800 recap/mod request thread right now It worked nicely, except that from time to time it wouldn't detect the SSD I was using. -
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
Sure, why not I'm not 100% sure if I can do that, seems like fine soldering -
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
An all in one picture? Nope. Some of these are too hardcore for me, anyway. I can only do the easy ones for now. Just replacing the caps should probably help a bit for now -
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
I wasn't thinking on going insane with the mods. No wonder I didn't find the guide at first, it's in greek -
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
The 4.3mm x 7.3mm SMDs say S3141 2v120v. 99% sure this is correct, but I can't find anything If that height is not enough I'll buy another set of brackets and get the dremel out of the closet It should be OK, I think I have about 15-17mm clearance. MY soldering skills are bad, but I have a friend who is decent. If I'm lucky I can ask some physics lab guys at uni, too I also don't quite get what you mean by directly on the legs of the polymer caps. I have a picture in my head, but it looks weird -
Swedish E8400 @ "743" fsb and more
knopflerbruce replied to Calathea's topic in HWBOT OC-Crime Center
Huh? I can't find one that's at 743 FSB. -
DFI LanParty NF3 250GB re-cap advice
knopflerbruce replied to ObscureParadox_3XS's topic in General hardware discussion
I remember this board, voltages all over the place -
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
Not sure if these photos are good enough...? -
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
Didn't know those were SMD caps, thought they were something else 7.3mm x 4.3mm seems correct. As for a high quality PSU I'm using PC Power Cooling 750w Silencer for mobos with 4pin connector only. I can also use a Corsair AX1200 with 8 -> 4pin adapter I guess. -
ABIT IC7-MAX3 recap advice needed
knopflerbruce replied to knopflerbruce's topic in General hardware discussion
Can you please download the picture and draw what you need more info on/pictures of? I don't really see any big SMD caps anywhere... All the ones I marked have a diameter of 10mm. I'm charging my cam battery now, I see a pair of empty spots here and there. Will take some photos in a minute. It's not the best cam out there, but good enough I hope. -
I got this nice ABIT IC7-MAX3 here. The caps seem fine, but they're too tall for my WB mount, so I'd like to replace them. I guess there are better ones out there anyway... This is the first time I've thought of something like this, so I need someone to point out what caps I should get Caps w/red marking: Rubycon 6.3V 2200µF MBZ T0330 105 deg. C Caps with blue marking: Rubycon 16v 1200µF ZL T0326 105 deg. C If there are other caps I should replace, let me know
-
YGPM