TiN

LoL

Happy to see fresh faces in XOC. Keep it up man, that's a passion to drive us forward. Been there, know it myself.

Gunbo, go-go-go.

No 14K? Meh...

Enough chickenclocking, someone, deliver some LN2 to this guy, quick!

Vsen = Vsense Vrtn = Vreturn Return is not feedback pin, vsense is. return is complimentary negative sense signal. Power good pin is not outputting anything it's open-collector input.

Why? It's just logic signal, man Pin 25 is your buddy.

Sweet, PJ for president!

Good old, good old. I had panel DIY meters for opensource for a while, in case anyone needs. Dual-channel, 0 to 3V, power from +12 3pin fan header.

<rant> Any thread in voltmod forums section just give's now You are not logged in or you do not have permission to access this page. . If I'm a newbie user and want to learn something how to get more out of my hw - I must now register and login All those talks and editorials, leagues and PR-releases about being more friendly to newcomers, and now we get this? Thanks. <rant/> PJ applied magic fix. :battle:

Btw, it's not nvidia's to be precisely correct And I dislike arduino stuff regardless Pure C FTW!

it does not matter , usually it's same signal they connected to. I don't remember exact details, did GTX590 zombie long time ago, but pretty sure that's the case.

What is CLC? Try just pullup for memory controller ENABLE pin (10k to 3.3v). Sometimes there is no pullup on card on powergood from GPU PWM IC, in this case you would need to add it. It does not matter if you provide memory voltage, if GPU RESET is kept inactive due to power good wrong.

Having device ID from quadro does not mean that actual quadro features will work Try it in software which uses those and see what happen. So changed name of card to Quadro/Tesla don't really unlock anything except that fuzzy warm feeling

Yea, it was ... oh wait, 15 years ago (GeForce2). Since GeForce3 GPU silicon is fused at manufacturing/assembly process, and no bios/resistors would help to unlock it. There is some software locks based on simple VGA name detection in some CAD programms, which easy to activate just by changing name in INF, but that's rather an rare exception , than possibility. So in two words , try it and tell us your success, otherwise...neeext

Say hi to that fil(th)y man. I had few DIY SS systems and chillers 5+ years ago, not fancy production units Just had an idea of doing something for hardcore 24/7 people, but seems there are none alive as of today So product death declared due no target audience

Well, since EVBOT having transition state currently, here's alternative solution for you, EPOWER people. Since controller accepts controls from PMBus, attached Raspberry Pi can talk to EPOWER and adjust voltages. Voltage range is 0.6 to 2.0V Tested with Model B Rev2.0 (not plus), but should work with any Pi. Details in this article for those who interested. Try it, and let me know if any problem Also old-school hardware-only way with trimpot resistor is covered too.

See the first post You will not get below zero under load with any reasonable TEC setup.

GF100/110 is about 0.400-1.000 ohm (delta measurement with zeroed lead resistance). Also for 1G 1.4V you will be around ~300-350A tops if your temps are over +50°C.

TEC ain't real subzero, by any means, sorry

I just would like to know are there many folks who have subzero for everyday rig, not for records/reviews work? I know there were people in old ages which did run subzero systems for gaming/every day stuff, but are there any today? Subzero meaning, at least a phasechange chiller.

Gunbo

E-Powered

No way

Great info, thanks for sharing. Had used same amount of cards with EPower, zero issues, all cards and EPOWERs alive still after all Vince's abuses. Side note - there is a 4-position DIP-switch on EPower to set voltage as well, so you can control voltage without EVBOT, just not as much precise as with it. EPOWER is product available for sale