-
Posts
984 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Events
Blogs
Everything posted by GRIFF
-
GRIFF - Xeon L3014 @ 5715MHz - 0.997 fps HWBOT x265 Benchmark - 4k
GRIFF replied to quiekMew's topic in Result Discussions
The strange thing that with the same profile an E8500 reaches 656 of fsb in spi 32M with air cooled NB. The cpu on the GA-EP45-UD3P has validated 700mhz fsb with the ram in single channel. in dual channel instead the limit is 622 of fsb, exactly like on REX in dual channel and divider 5:8 with strap 333. I still have to try other straps and dividers. I started with this which was already tested on the E8500. -
GRIFF - Xeon L3014 @ 5715MHz - 0.997 fps HWBOT x265 Benchmark - 4k
GRIFF replied to quiekMew's topic in Result Discussions
See 1080p score for more details -
GRIFF - Xeon L3014 @ 5715MHz - 0.997 fps HWBOT x265 Benchmark - 4k
GRIFF replied to quiekMew's topic in Result Discussions
Thank you guys. -
GRIFF - Xeon L3014 @ 5715MHz - 0.997 fps HWBOT x265 Benchmark - 4k
GRIFF replied to quiekMew's topic in Result Discussions
I Need to solve issue with fsb Wall at 622 fsb with dual channel and 5:8 divider and 637fsb at single channel and 5:8 divider. 636*9 Is not limit for this CPU at cascade cooling))))) -
GRIFF - Xeon L3014 @ 5927.4MHz - 5927.4 mhz CPU Frequency
GRIFF replied to superpatodonaldo's topic in Result Discussions
I don't think so, I don't have the possibility of finding nitrogen for the moment. -
Bullshooter - DDR SD-RAM @ 430MHz - 430.5 MHz Memory Frequency
GRIFF replied to unityofsaints's topic in Result Discussions
Noce score!!!!! -
gtxx58 - Core 2 Quad Q8200 @ 3962MHz - 11min 23sec 655ms SuperPi - 32M
GRIFF replied to TaPaKaH's topic in Result Discussions
Great score man. PSC or BBSE? -
Mr.Scott - DDR SD-RAM @ 425MHz - 425 MHz Memory Frequency
GRIFF replied to ozzie's topic in Result Discussions
great score Scotty. -
shar00750 - GeForce GTX 780 Ti - 91546 marks 3DMark05
GRIFF replied to chispy's topic in Result Discussions
Great score but where gpu-z Tab? -
Mr.Scott - DDR SD-RAM @ 413.2MHz - 413.2 MHz Memory Frequency
GRIFF replied to ShrimpBrime's topic in Result Discussions
Not bad but I expect more from you)))) -
GRIFF - GA-EP45-UD3P @ 708.7MHz - 708.71 MHz Reference Frequency
GRIFF replied to antome's topic in Result Discussions
Hello to all. I wanted to tell a little about this beautiful card. Doing the tests for the CUP with the E8500 arrived at 650 * 9.5 and 1.82V doing mathbench on a restart the card has stopped starting. After verification I find the VRM mosfets in short. I look for datasheets and find that the original mosfets are painful. Composition of a single phase is made as follows: 20A + 2 * 29A. Soldered the new mosfets in combination 75A + 2 * 81A. Result: cold mosfets even with 1.9V on the cpu and under stress. mathbench closed at 650 * 9.5 at 1.78V. -
ivanqu0208 - Celeron D 347 @ 8362.2MHz - 8362.21 mhz CPU Frequency
GRIFF replied to Basofia's topic in Result Discussions
Great One and CPU. -
GRIFF - DDR SD-RAM @ 445MHz - 445 MHz Memory Frequency
GRIFF replied to meiyo's topic in Result Discussions
For me is the combination of the frequency + voltage. At lowest frequency but at the 3.6-3.7V all right. It also depends on luck -
GRIFF - DDR SD-RAM @ 445MHz - 445 MHz Memory Frequency
GRIFF replied to meiyo's topic in Result Discussions
Vcpu-1.67V Vdimm-3.6V Another CPU. Rip my best bank. later I make a 256mb bank from this -
cnzdrn - Phenom II X6 1055T @ 6355.9MHz - 6355.91 mhz CPU Frequency
GRIFF replied to Redwoodz's topic in Result Discussions
Great work Adriano!!!! -
ale belo - DDR2 SDRAM @ 646.6MHz - 646.6 MHz Memory Frequency
GRIFF replied to unityofsaints's topic in Result Discussions
Need more Ale)))))