KaRtA

1. See above, but I got it from a friend. 2. I have hopefully a LN2 fill due tomorrow. Will let everyone know once I have had a try. At this stage at -60 on the SS I am in a world of pain though, it's just in that zone of making training a full pain in the ass. Board is still very capable once you work it all out, only negative is you can't go nuts with A2 PCB DIMMs like the X570 have allowed. My board isn't happy past 4000C12-1t or 2t so running high mem speed and low FCLK for avoiding cold issues isn't possible. 4000C12 with 1000FCLK is stupid slow.

Did get 3800C12-12-1T with 1900FCLK running also. Nice and Tight, seems to be pulling ahead now against my 2700X efficiency. Including a 4.6G run for reference on scaling. At 4.2ghz its a good 12 seconds faster. 2933C9/1467 Performance wasn't too bad either, 4 seconds faster than my 2700X Efficiency at 4200.

If you ever find the key Infrared, I’d love to hear it. My current tests have 3620c11-1t around 8m21s with Waza in W7 x64 on C6H/3900X testing 2:1 ratios now ready for cold but the performance hit is big. Same 4g but 4000C12-2t/1000FCLK is at 8m34s. Huge difference . I also did a few tests at 4000C12-12-1T but the improvements over 2T weren't really there.

Sapphire cooler on a EVGA graphics card ????

Nailed it!

Loving the cold mornings there Shane? Nice gold cup, congratulations

Ah good, I am not the only one with TurboVcore issues then. Makes it a massive PITA to reboot each time. The C5 and reset bios after failed training is an massive kick is the ass too. This C6H is pretty rubbish on memory too, not too happy over 3400 on air, at least 3500C10 is possible on Cold with the old 2700X Will test my 3900X chip on SS soon and see what -50 to -60 is like first before ordering a fill and wasting my money. It's not great but good enough.

So you think the old boards are a pain with CB more than new X570 Boards? I just picked up my 3900X, and pre-testing on my C6H. Dont want to waste LN2 if it's going to be that bad on cold.

Nailed it Bully, fantastic result as always :)

Epic CPU. Nice one.

Is there any card you cant get 1st on with 3dm01? Get an inferno mate, no insulation needed then.

I had the same problem with mine, turn out I just hadn't plugged in the power correctly. You had power to both 8pin?

What Matt said, the hell!

Micron E-Die or B-Die? Congrats, I watched on stream.

Totally was on air, cant they all do that on air?

Nice one Bully

Don’t worry. I had trouble with my 6.8g R15/7.2g Pi chip with CB but got around it after 20L of LN2 to find the right combination of voltages. key was booting low pll termination, not over 1.6v then set eventual to 1.68v. RSVD did not work for me on that chip and only gave a 00 code every time I used it. 1.1v internal pll voltage core pll 2.35v cpu standby 1.6v dmi 1.5v but increase in OS for stability, 1.85v was fine for me, but didn’t like booting higher than 1.5-1.6v (again would 00 code) pll bandwidth 3 seemed best also

I’m not rebenching brother. My CPU is off to a new home. Enjoy the gold cup mate, she’s all yours.

Nice one Alby!

5960x cpu allowed? Think it would be outside the point of this stage.

8Ghz Superpi result, respect. Regardless that it's 1m

Who says it’s silly? great work Luumi

You did it. Well done Dan

CPU so strong

Crazy man. Nicely done.