Jump to content
HWBOT Community Forums

KaRtA

Members
  • Posts

    742
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by KaRtA

  1. All I can do guys. Need a better chip to break the 6 minute mark. I have no energy left now, or LN2 for a long time. 5775 cpu would do it, or one that can reliably repeat 5750, but I can't any longer. 5750 cpu, 3200C10-10-10 / 1600 FCLK https://hwbot.org/submission/4316105_ Have fun.
  2. I either had it set at 1566 or 1600. Had to make a change during the session, and can’t remember if this was before I changed to 1600 or after.
  3. Played some more today. No screens yet as still testing. 3133C10 mem/ 1566flck I got the following 8m20.900 - 4000Mhz - 500.900 7m58.404 - 4200Mhz - 478.404 7m38.716 - 4400Mhz - 458.716 7m30.896 - 4500mhz - 450.896 4600 not exact Scaling really tapers bad as clock speed increases. From 4.4g to 4.5g there is only 7.9s compared to 11s /100mhz average from 4g-4.2g This is why when we reach over 5.4g the scores just seem to stop dead. Still trying to find a work around to help though. Even though this is roughly 4 seconds faster efficiency at 4g, it will likely only translate to 0.5sec at flat out Would love to try my old 2700x again with this current efficiency as I feel it could be faster in the top end vs the 3900X. No way I’ll get it out of the wife’s daily and have my life in tact afterward.
  4. I got through most of my issues with the right voltages set, waiting for the reboots and not changing memory once going. Most of the time, can reboot at -170 ish, if it's lower than that I can't reboot until -140. vDDG over 1.18v is your first issue. Some chips just have a really shit CB that you cant get around, and other than that using the correct bios is the biggest thing to check (0050 and 0015 are best). Its a tough platform, you will waste a lot of LN2 and time until you experience the bugs, but once you now, it's quite easy past that point. But, memory must be trained correct or you will have to warm to -38 each time. Anytime you change memory when it needs a retrain, I found this had to happen. If you haven't set the memory and FCLK right before going cold, you will have a myriad of problems. I wrote in a review here, may or may not help, needs a little still from my last session but will get the gist: https://forums.overclockers.com.au/threads/rog-crosshair-viii-impact-x570-review-and-guide.1272265/
  5. Its for Hardware boints brother, not outright. I got celeron's I can try that on.
  6. Man, we got smoke here too right now. No need to move when I live in paradise. And, thanks Alby
  7. Injecting didn’t work for me. I have full working USB with my image on all X570 boards now.
  8. Hey. You need a board you can run a external USB adaptor on, then install the modded USB drivers on that. you cannot install W7 direct on an Impact with USB in the install files. I ran through 2 boards to get working.
  9. How about people just buy retail products, and just run the freakin things like they are designed to. No modding, no stuffing around. Plug the damn thing in, press the run benchmark button and stop complicating shit that shouldn’t be complicated. Jeeeeeebus
  10. Don’t call him that alby, you’ll give the young man a bigger head than he already has. Killer work Jordan, knew those tweaks would do it :)
  11. Same one, just working a few more things out. I only bought one other that was great on ambient, horrendous on cold, so kept the original. No money to bin when LN2 costs so much and these use it up super quick. Gazza in da-house! Good to see you around mate.
  12. Had to be in the right zone. Between 1.6 and 1.65v on this bios. Older bios I could push 1.8v with cold NB no issues, but the new one with cold is troublesome with higher voltages.
  13. So because of Yosarianilives or however it’s spelt completely relevant but unnecessary for people to even concoct, server hardware still allowed?
  14. Yeah, I should have done the same. Every other screen I took was without all the tabs open, so they are probably less valid. Be easy enough to do again. It's was almost a waste of a session except for this. I was hoping to do some superpi, as the board and chip clock really easily together. The fail happened when for 32m, there is just no stability from the memory. Pretty much loop 4-6 every time, regardless of strap, dimm count, IC Type, voltages or timings Not sure what I can do about that.
  15. Can you disallow Titan Z while we ban Fiji/Polaris Duos?
  16. I thought country cup was about having all the highest scores? Have I been doing this wrong all these years?
×
×
  • Create New...