GtiJason

Great result, especially for air

Nice Shar, guess OCN having Hawaii theme party

Alright, good job bro !

She's a beaut David ! If I win I'd just like to try on SS and then do a quick 1 week contest and pass it on

Exact problem with my 2nd board

"Boards such as the Z87X-OC have a special training procedure for the BCLK and it allows 110-114mhz on most every CPU, so you can do over 180mhz BCLK on air with these CPUs and boards. Some boards won’t have this BCLK training and will be limited to 103mhz BCLK up and down, most mainstream boards for instance. They also won’t have the training procedure for when you set the BCLK. For max bclk for 2d tests use bottom slot for discreet gpu. For 3d you will be limited Use the last PCI-E slot on the Z87X-OC or any last slot which is directly hooked up to the PCH. You can find this slot as it will be a 4x PCI-E 2.0 slot, this slot’s PCI-E clock is always 100MHz while the other slots will go up with the BCLK/PCI-E clock you increase." It is best to set the BCLK first and then change other settings such as memory IDE mode, use it for your OS. Win XP/7 can 8/10 I'm not sure https://community.hwbot.org/topic/77746-the-gigabyte-z87haswell-overclockingoc-guide/

Not sure what Mutt's saying about insta banning bios hacking to make W7 work on lga 1200, seems harsh but XP appears to be possible on new Intel platform, so good news there !

Nice setup bro ! Good work

Looking good man ! Must be nice to have a combo (imc,board,ram) that can do 4133c12-11 1T as well as 4800+ C14-13 2T. I have a somewhat fussy APEX XI with imc on 8700k not much better that I just recently was able to run 4800c14 after trying far far far more kits than I've ever had to bin for a given setup. First kit of BDie I bought from Dec 2015 did 4133c12 straight away 1.885v w/ wazza lol. (Edit, MOCF bios set V so about 1.940-1.950v real) What do you mean by PB ?

The quality is amazing David

You the best Roman !!!

If you can't change in msconfig / Boot / Advanced options then use this . . . Control Panel => System => Advanced Startup and Recovery => EDIT file: => / maxmem=600

Nice to see you using the gpu with almost 84% asic. Responds well to temps at least -45C. Never had a pot to try colder but probably like my ti KPE and dice is max cold before problems

Nice one Angel ! NinjaEdit: Is that a VENOM on big cpu ?

I can confirm that the 4600c19 kit is AO but never tried on x299 (the platform it was made for) Usually use it on APEX XI or MOCF

That's Devils Canyon for you. Poor scaling typical for cold and volts

Using HYKO's will net you a few points

Going to be hard to beat is she keeps scaling on lin, hard to beat the way it is on dice. Top spot could be yours if you keep er Froze and never let it Burn !

Just a guess but I think he wants an estimate on what his stuff is worth This is best place to ask such question ⊃››»»»〉〉〉 https://community.hwbot.org/forum/86-wanted/

That's correct, I was very confused the first time I went to flash mine. Might have one specifically for ln2 board, will upload if so. Just send me a dollar by mail for each dl. ? I'll just upload what I got so they are here for those in need FPT-Z97(Win).zip mb_bios_ga-z97x-soc-force-ln2_f3.zip Z97XOCL2_X02.zip Z97XSOCF_X04.7z Z97XSOCF_X08.zip

Good god !

Where there's a will, there's a way ! Wayback Machine / Archive . org can sometimes help. This time Archive.Gti can help you most of the way, only issue is the Q? do you have to remove any resistors like on this pic of 1080 Strix s1080_tool_v02.zip S1080TIXOC.rar strix1080tistock.rom 1080TI_STRIX_LN2_TIPS.pdf

Good job Gigelz, solid ddr3 !

Lookin' good bro !

If you are talking about the 0094HT I linked on November 22nd here's all the supported cpu's