Rauf

Gonna give this board a try soon. What bios is recommended? Latest official or any special XOC bioses out?

Bios 1.41 fixed the reboot issue. I can also confir that 4 dimm now work with 1T. Have also done some testing on 4 dimm vs 2 dimm and there is NO performance gain when pushing frequency and timings with both 2 dimm and 4 dimm. However I have a problem with my board. It's probably just my board, and problem probably occurred during LN2. But it gets stuck with USB over current protection and shuts off after 15 seconds. I've tried to disconnect all USB devices of course but it doesn't help. Looked at the USB ports but they seem fine. Sometimes I can get the board to boot after resetting bios and powering on like 20 times. Then it works for a while, but after a few reboots it's there again. Is there any way to bypass this? Any way to hardmod it or something?

I'll take the cpu pot if it becomes available.

Insane speed on these 5960X now!

Thanks, so the usual samsung temps

Great mems and great score! How much cold do they like?

Thanks! I tried cold MFR, but mine are average so Samsungs on air were slightly better. Maybe with cold AFR when they become available...

Nice, I have no more backups Will run again tomorrow with ln2 hopefully.

Very nice. Hope to see it cold!

I'm gonna go cold mems first time tomorrow. MFR...should I expect CBB?

Strong CPU!

http://hwbot.org/submission/3016863_minicoopers_xtu_core_i3_6300_716_marks - 102.9 on Asus. Also, my MSI Xpower does the same baseclock as the OCF. Will be interesting to see how it scales on LN2, but I'm no XTU master...

Thanks! They are G.Skill TridentZ, Samsung E-die. I don't think baseclock is board related...but the OCF is good for XTU!

I have so many backups, no need for for you guys to even try

here's 5.1.1.25 https://pb380-my.sharepoint.com/personal/t_bergstrom_pb380_onmicrosoft_com/_layouts/15/guestaccess.aspx?guestaccesstoken=b8nIdMb5P0qvgdsoSc3rNMPcqgCfecHtYyqjJAMy3fk%3d&docid=0bcdc4b10148f4f7f831f6824282f2b6f

Thanks all. No, won't go higher on air.

Come on MDD, show us your real results! And show us your mem speeds!

There will surely be wallpaper

Thanks! They are Team Xtreem 3866. Samsung E-die.

Probably waiting for HOT?

Doesn't scale on ln2?

Thanks! It's easier to see if you missed a spot with red

Clean all contact areas with aceton, use kryonaut and mount really tight works well for me. Been benching six sessions straight at -170 and below with no crack. Last time I didn't even reapply tim on die, just left cpu mounted in socket and it worked as well. But you use kryonaut as tim and then seal with glue?

Good score. Crazy volts!

You need XP for this