Skylake 6700K/6600K Batch and Serial Numbers

[m4xwellmurd3r]

Its possible to find now 2016 batch? Or is it too soon?

 

might be too soon. I just bought my 6600k last wednesday and it's batch number is L548B508

 

I don't know what the stock VID is. Is there any way to check that without having to revert the cpu settings back to default?

 

I'm currently trying to see how stable it is using the x264 stress test, 16T for the next 5 hours. It passed at 4.7ghz@1.344v and now it seems to be good at 4.8ghz 1.404v

 

I'll bet it'll post into windows at 5ghz using 1.4v or less.

 

Edit:

 

I returned all settings to stock and the bios is reporting a core voltage of 1.176

 

Im having a hell of a hard time finding the boot viltage for 5ghz. Keeps bsod'ing when i log in to windows.

 

Edit: got it into windows. Took 1.5v (1.488v load) to get into windows at 5ghz

Edited February 15, 2016 by m4xwellmurd3r

[Alan_Alberino]

Continued trying my L547B302 i7-6700K, could run Cinebench 4800-4800 with 1.36v CPU-Z load voltage (1.328v IDLE, 1.34v set on BIOS), is that good or bad? (No-Delid, like 30 degrees ambient temp, 86 degrees max load temp)

 

EDIT: It also makes 4700-4700 1.28v CPU-Z Load (1.265v set on bios)

Edited February 15, 2016 by Alan_Alberino

[xxbassplayerxx]

Very strong!

[m4xwellmurd3r]

how stable is it with those clocks/voltage?

[Alan_Alberino]

how stable is it with those clocks/voltage?

 

Like I said, I had 86 degrees full load during Cinebench, so I couldn't make any stress test due to cooling limitations

[Guest Mikio]

Its possible to find now 2016 batch? Or is it too soon?

 

I just bought my 6600K last week and batch #X544B775 on Box and CPU.

 

I havent seen any reference to this batch number that I can find.

Made in Vietnam.

 

Intel warranty is 3 years and my numbers come up as warranty expiring in march 2019.

 

Still toying with it for clocks, kinda new to skylake so bare with me

[danspy]

I got my 6700 L549C365 (MALAYSIA) last week in Thailand.

 

I did only stock Vcore, 4.4ghz Prime Stable 4.5ghz 2 workers stop after seconds, 4.6ghz BSOD.

 

I had to RMA my Mainboard because it runs only x8 PCIe.

Edited March 3, 2016 by danspy

[S_H_A_Y_A_N]

Continued trying my L547B302 i7-6700K, could run Cinebench 4800-4800 with 1.36v CPU-Z load voltage (1.328v IDLE, 1.34v set on BIOS), is that good or bad? (No-Delid, like 30 degrees ambient temp, 86 degrees max load temp)

 

EDIT: It also makes 4700-4700 1.28v CPU-Z Load (1.265v set on bios)

 

nice chip

Edited March 3, 2016 by S_H_A_Y_A_N

[Morteza.p]

hello guys

 

cpu: 6600k

batch: L524B409

vid in bios : 1.161v

mobo/bios : GIGABYTE Z170X-SOC Force / X08

not delid

 

4500 # 1.16v superpi 32m

4800 # 1.43v HWBOT Prime

5000 # no boot at 1.5v

 

 

[stasio]

I had to RMA my Mainboard because it runs only x8 PCIe.

You should reinstall (clean install) your Windows OS, before send to RMA......

[Morteza.p]

hello guys

 

1)

cpu: 6700k

batch: L519C192

vid in bios : 1.29v

mobo/bios : Maximus VIII Hero / 0402

 

5000 # 1.44v windows boot

5000 # 1.45v HWBOT Prime

 

2)

cpu: 6700k

batch: L519C192

vid in bios : 1.31v

mobo/bios : Maximus VIII Hero / 0402

 

5000 # 1.46v windows boot

5000 # 1.46v HWBOT Prime

[danspy]

You should reinstall (clean install) your Windows OS, before send to RMA......

 

Yes I did, clear cmos, Windows new install, different VGA, CPU recited.

 

Even my GTX 970 runs only x8 after dis stupid bord, and is in RMA to.

[flanker]

L519C, very nice...

[Morteza.p]

L519C, very nice...

 

thanks brother

unfortunately, it was not good chip.

the n°1 cpu have been tested with Gélid Extreme under LN2 .

because in did not test 5800 frequency.

 

http://hwbot.org/submission/3072468_

 

[Alex@ro]

L549B412 Had 8 pieces,7 crap,and i mean no boot 5 ghz 1.45 ,then this one came in:

 

5 ghz 4800 cache 1.35 bios set lvl7 llc,can do 5000/5000 1.37 too Win 8.1 64 Cb R15 stable water 25 ambient:

 

 

Boot 5 ghz win 8.1 64 1.31 bios set,hwbot prime stable for this too.

 

Very bad ihs,this screenshot above is with this one and grizzly kryo under IHS but still bad contact under ihs,will swap to other.Wtf is intel doing here...

 

[Dancop]

Stroooong

[websmile]

Junk

[Alex@ro]

Reran with IGP deactivated,seems like GTX295 activated IGP by it's own lol and with diff IHS(proper contact) voltage required is 1.32 for 5000/4800 CInebench R15 x64

 

[nacho_arroyo]

Wow!! crazy CPU Alex! whats ambient temp u have there?

[Alex@ro]

25 degrees.... Cpu can do 5 ghz 1.27 3dmark 2005,5300 1.43 same water 4c 4t

 

Sent from my SM-N910F using Tapatalk

[xxbassplayerxx]

Wow... 5300 on water...

 

What's the highest you can get XTU to pass without Slowmode?

[Alex@ro]

I don't know, i won't risk killing it on water, but it does 5000 1.35 xtu, probably 5200 with little bit colder water is possible, still not to the standards on enthusiast league where 5300 and 1.65v are a walk in the park

 

Sent from my SM-N910F using Tapatalk

[xxbassplayerxx]

Gotta get dem cash and hardware prizes, mang. "water cooling", y'know?

[scenarist]

Hey everyone I'm new here. I just got my 6700k in the mail today ! Batch# L549C881 and I want to know if you can tell anything by just knowing the batch number or do I have to test it myself ? Im still waiting for my ram and gpu to come so I cant power up until I get that ram.

[Dancop]

Nope...no chance