Crew Leeghoofd Posted April 9, 2016 Crew Posted April 9, 2016 You have a screenshot with the ASRock memory timing to see what subs the board sets? Quote
Fact11 Posted April 13, 2016 Posted April 13, 2016 (edited) Here is a screenshot of the timings the board sets, apart from me setting the primary timings, cr, trfc and tfaw manually as per my previous post. Sometimes it will pass training and boot up successfully and other times it will just fail to boot. Its very intermittent. The bios needs a lot of improving, as these sticks have done this speed and faster on an Impact board. Edited April 13, 2016 by Fact11 Quote
willemc700 Posted April 25, 2016 Posted April 25, 2016 Just ran a 740 on a Z170X SOC FORCE. Timingsheet is also there. Quote
xxbassplayerxx Posted April 26, 2016 Author Posted April 26, 2016 Congratulations!!!! Which BIOS were you using? Also, RTL's seem quite odd which kept happening to me despite having them dialed in manually. Did you have them set to something or on auto? Quote
willemc700 Posted April 26, 2016 Posted April 26, 2016 TWR was set manual to 9 still it shows 11, rtls where set manual to 58/58 and 48/49. Dont know why it shows what it is. Maybe teaching eventho it was set manual. The bios i used was X08. Quote
willemc700 Posted April 27, 2016 Posted April 27, 2016 In my quest for >740 did i find a way to run with BCLK on 102,77 on de soc force. 102.78 was no go. Boot from 102,67 then in windows raise bclk with 0,01 (gear activated + button next to gear), it didnt gave me 740 or higher yet but 738's are easy (approx 1 in 3 to 4 runs) Quote
Guest Bullant Posted August 27, 2016 Posted August 27, 2016 @ bass ,you still have this board? Just about to try this board now,I'll post some mem results today Quote
Guest Bullant Posted August 28, 2016 Posted August 28, 2016 Had bit of time today to test this board,will play with some more timings and bios soon along with fresh OS Quote
xxbassplayerxx Posted September 1, 2016 Author Posted September 1, 2016 Yeah Bully, still have it! Haven't had a chance to play around with it recently. Had a big move, new job, etc. Are you using the LN2 board or the standard? Quote
Guest Bullant Posted September 1, 2016 Posted September 1, 2016 Yeah Bully, still have it! Haven't had a chance to play around with it recently. Had a big move, new job, etc. Are you using the LN2 board or the standard? No this is the std board as you can see no ln2 name in the mobo tab and on asrock config I don't own either board,this std board just a loaner Oh all the best with your move and new job man Quote
Guest Bullant Posted September 2, 2016 Posted September 2, 2016 Some retail MFR on air...Robbo was kind enough to give me his mfr,seems really nice kit,will run them on cold next week when I get my board.Expect them to do quite well Quote
Fact11 Posted September 3, 2016 Posted September 3, 2016 Tried 32M at 5ghz in Windows 10 on Z170 SOC Force. Quote
pilu Posted September 7, 2016 Posted September 7, 2016 hello Z170 SOC owner suddenly I can not boot over 2400MHz RAM manual set at any timings, 7segment display don't light on after bios save change or show code 55. I do not understand how it can be possible because I saved the preset and I have not changed anything or hardware settings. This is my config and my last bench: pilu`s XTU score: 1708 marks with a Core i7 6700K Now use F6 bios but I would like try X08 bios, can you help me? Thanks in advance Quote
xxbassplayerxx Posted September 8, 2016 Author Posted September 8, 2016 Be sure to set DRAM Initial volts manually. Auto doesn't work on most BIOSes. Quote
Guest Bullant Posted September 24, 2016 Posted September 24, 2016 (edited) Yeah,don't think the gigga 4 dim board would come close to this air,(the ocfm does it easy too)I might test 4 dim soon Edited September 24, 2016 by Bullant Quote
pilu Posted October 2, 2016 Posted October 2, 2016 Now I have problem with Windows7-10 64bit version (memory error crash and unstable system, sure no cpu clock error), 32bit work great @ 3866MHz CL12-12-12-28-2 1.870v Geil Dragon B-Die with 6700K. I have follow and light adapt this BIOS config: http://forum.hwbot.org/showpost.php?p=435452&postcount=104 Can help me with memory configuration? Thanks in advance Quote
Administrators websmile Posted October 2, 2016 Administrators Posted October 2, 2016 Set max mem for 64 bit OS if you use tight timings like 3866 12-12, this is a B-die IC issue on skylake Quote
pilu Posted October 2, 2016 Posted October 2, 2016 Set max mem for 64 bit OS if you use tight timings like 3866 12-12, this is a B-die IC issue on skylake I need set 16384 in msconfig? correct number? Quote
Guest george.kokovinis Posted October 2, 2016 Posted October 2, 2016 maxmem - 4000 Tick the box "make boot settings permanent ", reboot and enjoy Quote
Guest Bullant Posted October 6, 2016 Posted October 6, 2016 Couple 5ghz runs on 4 dim board,Afr on air,will try Afr on the other board @ 5Ghz in the next hour if i get time Quote
Guest Bullant Posted October 6, 2016 Posted October 6, 2016 Had time to run couple up quickly on other board,same again memory air Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.