Jump to content
HWBOT Community Forums

Recommended Posts

Posted
Thanks Michael. Clears it up.

 

I'd use my OCF but it crapped a dimm slot the second time I used it on air. Right after I prepped it for cold. FML. So SOC-FORCE it is.

 

Don't forget to set Memory Training Voltage manually if you use the SOC Force :celebration:

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Posted
Don't forget to set Memory Training Voltage manually if you use the SOC Force :celebration:

 

Thanks man, all over it. Was one of my first problems when I first got the board.

Posted (edited)

Can't link my 3d11 sub to G.Skill competition. Stages 1 and 2 show up, but stage 3 is missing.

 

3d11rvukn.png

 

Submitting through esports page is not an option, it tells me something like old version of Internet Explorer not supported while using Firefox and Edge. :D

 

Edit: When clicking on Link for qualifier this shows up, 5G XTU should not be a stage for this?

g.skillcompqxsjo.png

Edited by aerotracks
  • Administrators
Posted (edited)

Go via hwbot->competitions->gskill world cup qualifier, then go to submissions and on the low end of the page submit score. I think the upgrade of eocsports brought some comppability problems. Let me know if it works

 

P.S. I really wonder what this is at a lot of comps, I have no problems to submit to all of them in theory, but for lots of people it doesn´t work

Edited by websmile
Posted
Go via hwbot->competitions->gskill world cup qualifier, then go to submissions and on the low end of the page submit score. I think the upgrade of eocsports brought some comppability problems. Let me know if it works

 

That's precisely what I said wasn't working :P

 

Please upgrade your browser!

 

Your Internet Explorer browser is out of date, and may not be compatible with our website. Please upgrade to a newer version of Internet Explorer.

  • Administrators
Posted

For me it works if I go via submission tab at eoc sports, when I use stage 3 submission tab it doesn´t work. So which one did you use?:P

  • Administrators
Posted

We seem to have a compability problem after the upgrade of the eoc site, I already created an internal task. On the submission button, I think you are right, hopefully this will become a bit more convenient at next update

Posted
Can't link my 3d11 sub to G.Skill competition. Stages 1 and 2 show up, but stage 3 is missing.

 

3d11rvukn.png

 

Submitting through esports page is not an option, it tells me something like old version of Internet Explorer not supported while using Firefox and Edge. :D

 

Edit: When clicking on Link for qualifier this shows up, 5G XTU should not be a stage for this?

g.skillcompqxsjo.png

 

Why does it show XTU for you?

Posted

Please remove the results because of poor results were uploaded.

 

 

Please upgrade your browser!

 

Your Internet Explorer browser is out of date, and may not be compatible with our website. Please upgrade to a newer version of Internet Explorer. this error

  • Administrators
Posted

Try submit at eoc competition page "submissions" at lower end where the button submit is located, this worked last time tried. We are working to fix the issue

Posted
Why does it show XTU for you?

 

Maybe the link from that competition popup (where it says you might want to participate in following competitions..) on hwbot site is bad? All I did was click on the link which I framed in red in the first screenshot.

  • Administrators
Posted (edited)

A heads up for all competitors, it seems we have a problem with the 3DM01 stage. Most likely (99.99% possibility atm) we will have to replace it due to a bug found on this when IGP is used. 01 has no validation link which we would need to detect this with foolproof ratio (time measurement error), we will keep you updated, if rules are changed, we will make an announcement for sure and this will happen as soon as possible. I guess it is in the interest of a fair qualifier that we announce it now and make a change instead of risking a major mess at the end of the competition. 11 will stay, 01 will most likely be replaced by another benchmark.

Big thanks to dancop who first detected this and splave who confirmed this as well :)

Edited by websmile
  • 2 weeks later...
  • Administrators
Posted

Please remember that new version of sysinfo is mandatory for verification links. I will hande this generously bc even older version of sysinfo can detect time measurment error due to FM, but better to play it safe for the subs coming ;)

  • Administrators
Posted (edited)

Good morning - I forgot to mention this, might be helpful - we cannot rule out despite all options like sysinfo and plausibility check by mods that we will have to check some subs at end of competition which we might see as too good to be true. This will be done by FM if we send them there, we all know that no benchmark is free of bugs. So if you see something weird at benching and still upload the result, make sure you have submitted several results to be save, bc when the file shows irregularities, there will be no way this stays at the competition and I do not want to hear complains you weren´t warned before. When it comes to a qualifier for a competition that involves this much of reward, we don´t play it eazy going^^

Edited by websmile
Posted

Hey guys i have a question. I submitted a score in the stage 1 maxmem category but forgot the proper background so i deleted the submission and e-sport automatically used a previous submission i posted. After re-reading the rules it says not to delete subs. How shouldnt i go about this?

Posted

@marc0053: no worries about it. The result was invalid and would have been removed by the moderators anyway. The no-delete rule applies for valid submissions.

 

Are you aiming for Computex participation this year?

Posted
@marc0053: no worries about it. The result was invalid and would have been removed by the moderators anyway. The no-delete rule applies for valid submissions.

 

Are you aiming for Computex participation this year?

 

Thanks for the clarificiation and yes i would like to attend computex if everything goes well :)

 

Cheers,

Marc

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...