Posted September 13, 20168 yr WARNING: The GPU fan is not working with this BIOS. Temperature readout is also not working. It's easy to fry your GPU if not taking care when using it. Flash at your own risk. GPU Voltage up to 1.6V in GPUTweakII "Cold slow" problem solved Always using 3D clocks Always using PCIE 3.0 TDC = 75A, TDP = 72W (highest possible from BIOS side) Hopefully there will be a solution to get higher TDP limits soon. update: TPD limit solved by The Stilt, run RX460_XOC.exe on your system to apply below changes. "Cold slow" problem solved Always using 3D clocks Always using PCIE 3.0 TDC = 500A, TDP = 1000W Note that this also kills the fan on your card, so once again, use with caution! You also don't get the increased voltage limits with this so ideally use both BIOS and The Stilt's fix. If you have problems with it reporting no adapters found you need to clean out any lingering driver entries by DDU: Official Display Driver Uninstaller DDU Download Edited September 14, 20168 yr by elmor
September 13, 20168 yr Thanks! Works for both normal Strix and Strix OC? Edited September 13, 20168 yr by Rauf
September 14, 20168 yr Author Thanks! Works for both normal Strix and Strix OC? Yes it should, I'm not able to verify however. Am I right in thinking this card is custom PCB? Correct https://www.techpowerup.com/reviews/ASUS/RX_460_STRIX_OC/4.html
September 14, 20168 yr Author Thanks to @The Stilt we've got a TDP solution, see first post. Edited September 14, 20168 yr by elmor
September 14, 20168 yr Great! I have ordered the strix OC since the non OC is not available here. Will test. Is the stilts exe a run once or we need to run it every reboot?
September 14, 20168 yr Author Great! I have ordered the strix OC since the non OC is not available here. Will test. Is the stilts exe a run once or we need to run it every reboot? Run once and then it should stick (after reboot).
September 14, 20168 yr Crew Correct https://www.techpowerup.com/reviews/ASUS/RX_460_STRIX_OC/4.html Thank you Elmor! Now to work out which part of the card needs de-soldering
September 19, 20168 yr yes, the same could be for 480 Strix and 470 Strix (after uplaod the LN2 BIOS the TDP limit seems still the same)
September 19, 20168 yr Does the utility for 460 work on rx 480 strix too? I mean having higher TDP limit? Sent from my SM-N910F using Tapatalk
September 28, 20168 yr any chance we can get eVC support for this mine will be here friday thanks for posting the tools Elmor and Stilt
September 29, 20168 yr Author any chance we can get eVC support for this mine will be here friday thanks for posting the tools Elmor and Stilt https://www.dropbox.com/s/o6lc8534wd5xkvd/eVc%20160929.zip?dl=0
September 30, 20168 yr Crew Question about XOCing this card I have 3 pots here - A fat, a slim and a stubby, but the mounting on them doesn't fit the RX 460 STRIX How have you all mounted them and it's like the copper from the block is actually covering the holes...is there a method that I'm oblivious to here?
September 30, 20168 yr Question about XOCing this card I have 3 pots here - A fat, a slim and a stubby, but the mounting on them doesn't fit the RX 460 STRIX How have you all mounted them and it's like the copper from the block is actually covering the holes...is there a method that I'm oblivious to here? I havent mounted my card yet, but I had to use a clamp for my gt 710. Sometimes you can take off mounting hardware and build a platform on the mobo and then actually place the pot against gpu, so it pushes a little and try and reinforce behind gpu, not great for mobo slot though. it's worked for me before. Maybe zip ties to tighten a bit. Did you try the g92 mounting holes, gotta look at my card when get home, havent taken out of box yet.
October 1, 20168 yr Crew I havent mounted my card yet, but I had to use a clamp for my gt 710. Sometimes you can take off mounting hardware and build a platform on the mobo and then actually place the pot against gpu, so it pushes a little and try and reinforce behind gpu, not great for mobo slot though. it's worked for me before. Maybe zip ties to tighten a bit. Did you try the g92 mounting holes, gotta look at my card when get home, havent taken out of box yet. Thanks mate Pot only came with 1 bracket, so guess I'm screwed on that front! I have made a fix though, so hopefully it will work
October 1, 20168 yr Thanks mate Pot only came with 1 bracket, so guess I'm screwed on that front! I have made a fix though, so hopefully it will work well I mean the brkt has different holes that you can change the screws to, so that you make it smaller. I totally forgot it came with another brkt. Edited October 1, 20168 yr by Strong Island
October 2, 20168 yr Crew Anyone got the stock BIOS or the script to flash the original BIOS handy? I seem to have misplaced mine
October 3, 20168 yr does anyone know how to do that aux mod manually or a .95v mod to help with the black screens
October 3, 20168 yr Boost the vddci? I should have ordered a evc when I had the chance, that was dumb of me, going to try and figure out how to hard mod it.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.