Jump to content
HWBOT Community Forums

Recommended Posts

We have some issues with some of the on-board fuses getting stuck in protection mode. It seems to happen easier if the board gets very cold. Simplest fix is to short them.

 

Location of fuses:

 

Uv7cnuF.png

Edited by elmor
  • Thanks 1
Link to comment
Share on other sites

Does anyone same experience as me on 0801 BIOS? It bootloop about 5 times before post, post code before reboot loop 9A. But its working fine. Is it normal as i not seeing it on 0701 BIOS? Thanks in advance, best motherboard, period :)

 

No not that one, usually see 14 a few times before booting

Link to comment
Share on other sites

Does anyone same experience as me on 0801 BIOS? It bootloop about 5 times before post, post code before reboot loop 9A. But its working fine. Is it normal as i not seeing it on 0701 BIOS? Thanks in advance, best motherboard, period :)

 

I haved the same problem with 3 motherboard and with bios 0026/0701/0801.

With 0088 and 0091 i not have 4/5 fake boot.

Link to comment
Share on other sites

MAXIMUS IX APEX BIOS 0906

1.Complete support for Intel® Optane Memory

2.Fixed PXE issue.

3.Fixed M.2 device issue (Plextor)

4.Fixed MemTest86 issue in multi-CPU selection modes

 

http://dlcdnet.asus.com/pub/ASUS/mb/LGA1151/MAXIMUS_IX_APEX/MAXIMUS-IX-APEX-ASUS-0906.zip?_ga=1.218967514.252291305.1488625082

 

This BIOS is very good at mem! My B-Die that only scale up to 1.9v until 0801, in this bios can run at 1.94v. So from 4000 12-11-11 1.9v can run at 4060 12-11-11 1.915v (and still run stable at 1.94v)

Link to comment
Share on other sites

Ok so I finally got a B-die kit and a 7700K and in my first 6 hours with kit on the board I got 4000 12-13-13-28-1T working on 1.97V 32M stable. However the moment I set 4000 12-12-12-28-1T on any voltage from 1.88V to 2.05V I get a 3F POST code. Am I correct in assuming that my 7700K's IMC is the problem?

Link to comment
Share on other sites

I have 2 7700k ,nothing special , and both can do over 4150 12-11-11 tight with vccio 1.2 & vccsa 1.25. I don't think you have imc issues,just settings not alright or mem not capable.

Try with dram vtt between 0.83-0.87v .

On what windows are you testing,x64 ?

 

 

Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

Ok so I finally got a B-die kit and a 7700K and in my first 6 hours with kit on the board I got 4000 12-13-13-28-1T working on 1.97V 32M stable. However the moment I set 4000 12-12-12-28-1T on any voltage from 1.88V to 2.05V I get a 3F POST code. Am I correct in assuming that my 7700K's IMC is the problem?

Switch maximus tweak to 1 or Auto, works better at 4k c 12... With BIOS 0701 0801

 

 

 

Cheers...

  • Thanks 1
Link to comment
Share on other sites

Do any of you have issues with Apex and low scores on xp/xp64 with gen 2 graphic cards in 3Dmark 2001/2003 ?

Compared with z170 and similar settings gt1 is lower and 2001 overall gives lower score.

Any magical settings for legacy ?

 

 

Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...