ASRock Z590 OC Formula Thread:

[l0ud_sil3nc3]

Special LS bin G.Skill memory flying on OC Formula

5200c15 1.96v all air cooled with fairly warm ambient temp. Timings are as set in profile and haven't had a chance to start tightening them up but initial results look great. 

 

Also freshy XP courtesy of @Splave

Edited August 26, 2021 by l0ud_sil3nc3

[Mahameru]

5 hours ago, l0ud_sil3nc3 said:

Special LS bin G.Skill memory flying on OC Formula

5200c15 1.96v all air cooled with fairly warm ambient temp. Timings are as set in profile and haven't had a chance to start tightening them up but initial results look great. 

 

Also freshy XP courtesy of @Splave

Great LoVo kit, I guess it can take 2.1+ vdimm  btw what SA and IOmem at 5200?

[l0ud_sil3nc3]

18 hours ago, ivaneza said:

Great LoVo kit, I guess it can take 2.1+ vdimm  btw what SA and IOmem at 5200?

Well 2.01 makes it all the way through and then hangs on stream triad, so it seems to scale inversely at some point after 1.96v.

SA = 1.55v

IOM = 1.65v

[Broken APEX49]

For LN2 mode, turn the switch ON.
1.05v for PLLTerm, 1.05v for CPU standby
Do I just adjust it with
Is there an order or something?

[Splave]

4 minutes ago, GTI-R said:

For LN2 mode, turn the switch ON.
1.05v for PLLTerm, 1.05v for CPU standby
Do I just adjust it with
Is there an order or something?

Im pretty sure Ln2 switch does nothing, only there because ASUS has one  

[Broken APEX49]

I’m not sure what you mean. 

[Broken APEX49]

Might be more responsive than APEX.

[Broken APEX49]

First try at OCF
Much more responsive than APEX
IO MEM voltage is low enough to complete the run.
Please give me advice etc.
TCWL
TWRRD Can't get sg dg low

[Mahameru]

Raise up your TRDWR_xx to 12, lower down TCWL to 9

[GtiJason]

Yes, lower tCWL to 9 like Ivaneza said
That will allow you to set tWRWR_sg from 23 to 21
and tWRWR_dg from 23 to 21
Lower tWTR_S from 6 to 1 
That in turn will allow you to lower tWRWR_dg from 21 to 16

[Broken APEX49]

[l0ud_sil3nc3]

@GTI-Rnice job breaking into the 5:04:xxx's

[Broken APEX49]

Good results!
I was just thinking that it was over 5006 MHz!
I lowered the bclk by 0.05 and it became much slower.
I was able to break my own record, but I'm not satisfied.
I don't understand how to adjust bclk.
What am I missing to get into the 05.04.5xx range?

[Broken APEX49]

Another problem is that the current situation is
IO MEM 1.5V
SA 1.6V
I've been moving it up and down, but the score keeps dropping.

[Broken APEX49]

DRAM IC training type is automatic OK?
Dual rank Single rank etc.
Which one do I need to select?

[Broken APEX49]

On 2021/4/17 at 午前2時47分, Leeghoofd said:

ちょうど私の玄関口に到着したばかりの、真新しい小売Z590OCフォーミュラ。ありがとうパパ@NickShih ボードのために。マザーボードのいくつかのショット。

 

 

Bios 1.24 Easy 5066C15、1.95Vdimm、シングルランクDIMM

 

TridentZ Neo3600c16を使用した4533C16 @ 1.65（非常に平均的なBダイスティック）

 

最新1.27 BIOSはメモリのトレーニングプロファイルを最適化し、LN2プロファイルを調整されています。 

 

 

HWBOTメンバーのChispyがZ590OC Formula用の起動可能なXPを作成しました。ここで入手できます： 

https://www.mediafire.com/file/8h55ndgfck10m4j/20CE0A7B83E5F08B-00-00.mrimg/file  （ダウンロードが遅くなる可能性があります）

• 上の画像にはMacriumReflectソフトウェアを 使用してください。
• ASMediaポート（IDE）を使用する-BIOSで互換性のあるXPを選択します
• 他のSATAポートをIDEに設定するか、無効にします

独自の「特別なXP」を作成したい場合は、ここ に挿入に必要なACHIファイルがあります。

 

その他のソフトウェア：

フォーミュラドライブ3.0.4  （クリック）

OC Formulaマザーボードユーティリティ （クリック）

M ulti-目的ビオス1.27A（クリック）

Beta Bios 1.27D（改良されたGear1）

最新のBetaBios 1.27H

 

楽しみ！

 

Z59OCF127A.rar 9.37 MB ・ 37ダウンロード

 

Z59OCF127D.zip 9.6 MB ・ 28ダウンロード

1920580306_ASRockMotherboardUtility（v3.0.412）.rar 59.29 MB ・ 23ダウンロード 22471576_FormulaDrive_3.0_407.4（portablelite）.rar 25.84 MB ・ 20ダウンロード

I installed this XP, but I can't see the Formula Drive text.
Is this a specification as such?
If it's a bug, I need a formula drive for XP.
It's been a long time since I've used XP, so I've forgotten how to use it.
Where can I get ERAM or OCX SuperPi Tweaker?
 

[Mikecdm]

23 hours ago, GTI-R said:

DRAM IC training type is automatic OK?
Dual rank Single rank etc.
Which one do I need to select?

Just use auto unless it has issues training.  If it has issues training, then try each of the settings until you find one that works.  On the older bios I had to mess with them.  On later bios, auto works just fine for me. 

5 hours ago, GTI-R said:

I installed this XP, but I can't see the Formula Drive text.
Is this a specification as such?
If it's a bug, I need a formula drive for XP.
It's been a long time since I've used XP, so I've forgotten how to use it.
Where can I get ERAM or OCX SuperPi Tweaker?
 

Apparently there is a way you can add additional texts to windows and then it works.  I do it the lazy way.  My was is just to run the normal AFD installer that you would use on w10.  It won't work and it will give errors when installing.  After installing full version, the file that is inside that xp folder will show texts and work correctly.  No need to use the version that was installed via full installer.

[Leeghoofd]

@GTI-R

 

OCX SPI Tweaker 1.0.8.rar ERAM220.rar

[Broken APEX49]

It can now be displayed.
Thank you.

Edited September 20, 2021 by GTI-R

[Broken APEX49]

1 hour ago, Leeghoofd said:

@ GTI-R

Thank you very much. I've installed it. Do you want to use e ram as is? Extract any of them? Sorry, I forgot how to use it.

 

 

 

SPI Tweaker 1.0.8.rar 64.95 kB · 1 download ERAM220.rar 34.45 kB · 1 download

 

Edited September 20, 2021 by GTI-R

[Leeghoofd]

1 hour ago, GTI-R said:

 

ERam install for Super Pi 32m XP/32 - Imgur

[Broken APEX49]

[Broken APEX49]

My XP is behaving badly.
Formula drive also shows low DRAM voltage for some reason
The pi does not work at all.
The display itself also changes.

[Broken APEX49]

On 2021/7/30 at 午前4時34分, Splave said:

フォーミュラドライブXP \フォーミュラドライブ\ビン

ネオサン

右クリックしてインストール

 

I can't right-click on it.

[Broken APEX49]

On 9/20/2021 at 4:46 PM, Leeghoofd said:

ERam install for Super Pi 32m XP/32 - Imgur

I can't get ERAM to install.