sergmann Posted October 22, 2022 Author Share Posted October 22, 2022 12 minutes ago, spl said: Old card working with X4b Nice job! X4b make my corsair 6600c32 running Stable 7200c32? with 12900ks Hope can improve with 13900kf Thanks Sounds great mate! Quote Link to comment Share on other sites More sharing options...
CreasiicK Posted October 22, 2022 Share Posted October 22, 2022 (edited) Do I have to install another XB bios first before xb4 patch one because it isn’t working for me with the 12700k it freezes on the aorus logo? Edited October 22, 2022 by CreasiicK Quote Link to comment Share on other sites More sharing options...
unityofsaints Posted October 22, 2022 Share Posted October 22, 2022 12 minutes ago, CreasiicK said: Do I have to install another XB bios first before xb4 patch one because it isn’t working for me with the 12700k it freezes on the aorus logo? You can use the dual BIOS function for that. 1 Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 22, 2022 Author Share Posted October 22, 2022 Sorry haven`t tested it with another CPU`s, only with 12900k and 13900k/kf. After flashing the bios, please press cmos. I`ve uploaded X4b Bios without patch, you can try it also. Just for Info, Z790 Tachyon with 12900k and AVX512 works also great. 7400+ for Geek3 and 7400 for y-cruncher m-die on Air 1 2 Quote Link to comment Share on other sites More sharing options...
CreasiicK Posted October 22, 2022 Share Posted October 22, 2022 @sergmann thanks, will do?? Quote Link to comment Share on other sites More sharing options...
Matt26LFC Posted October 23, 2022 Share Posted October 23, 2022 @sergmann I tried my 13600K on Ln2 with your x4b bios, my cb was about -160c I have ln2 still, is there anything you would like me to try settings/voltage wise to try move that cb Quote Link to comment Share on other sites More sharing options...
Matt26LFC Posted October 23, 2022 Share Posted October 23, 2022 (edited) Managed 7.1Ghz R20 at -155c Gutted this doesn't full pot Also after BSOD all I get is Post code 54, just loops through a bunch of post codes and ends on 54 and never changes GB3 always failed Dj, maybe need different volts cold? Edited October 23, 2022 by Matt26LFC Quote Link to comment Share on other sites More sharing options...
BOBKOC Posted October 23, 2022 Share Posted October 23, 2022 (edited) On 10/23/2022 at 12:58 AM, CreasiicK said: for me with the 12700k it freezes on the aorus logo? me too & afterLoad Optimized Defaults !? , ↓ Spoiler but before that it was normal and I saved https://disk.yandex.ru/d/cyn-xQvnEcCUOg the bios(with no ME) as an option: flash f20b by https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/page/6/#comment-618169, then flash x4b in windows with no ME by FPT https://disk.yandex.ru/d/uKA_2jUewIVdHg .\fptw64 -bios -f X4b@7200-32-41-64-16-32-52224-TM5.bin from https://disk.yandex.ru/d/cyn-xQvnEcCUOg and see? аfter power down. -F for flash & -D for save Edited October 25, 2022 by BOBKOC Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 23, 2022 Author Share Posted October 23, 2022 You can try to flash bios with Q-Flash. rename file like in manual in gigabyte.bin and put it on usb drive. Put usb drive in usb slot nearly of lab port and flash it. If it doesn’t work, try at first bios without AVX Quote Link to comment Share on other sites More sharing options...
BOBKOC Posted October 23, 2022 Share Posted October 23, 2022 (edited) At last I saw? "Biscuits" with x4b↓ Spoiler Edited October 23, 2022 by BOBKOC Quote Link to comment Share on other sites More sharing options...
dinos22 Posted October 24, 2022 Share Posted October 24, 2022 Hey folks, looking forward to seeing a bunch of you bench on this board soon i hope Quote Link to comment Share on other sites More sharing options...
Matt26LFC Posted October 24, 2022 Share Posted October 24, 2022 Guys how do I prevent h.265 from downclocking? Testing at 6Ghz, but various cores throughout the bench will downclock to 5Ghz Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 24, 2022 Author Share Posted October 24, 2022 Set 6.1 and open x265, open GTL and set one multi down, after it run Benchmark. I hope you are not with watercooling, x265 need a lot of power and heating CPU really hard Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 24, 2022 Author Share Posted October 24, 2022 7 hours ago, dinos22 said: Hey folks, looking forward to seeing a bunch of you bench on this board soon i hope I think you’ll show us also what is possible with this board ?, I think you have more CPU’s for binning Quote Link to comment Share on other sites More sharing options...
Matt26LFC Posted October 24, 2022 Share Posted October 24, 2022 Got the pot on and at -60c so easy for this chip I gave that ago and it didn't work booted 6.1G in BIOS loaded windows opened x265 then opened GTL and set 6G hit run and same, down clocked Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 24, 2022 Author Share Posted October 24, 2022 (edited) 9 minutes ago, Matt26LFC said: Got the pot on and at -60c so easy for this chip I gave that ago and it didn't work booted 6.1G in BIOS loaded windows opened x265 then opened GTL and set 6G hit run and same, down clocked Are your with 13th gen? how are your settings for AVX in Bios? Edited October 24, 2022 by sergmann Quote Link to comment Share on other sites More sharing options...
Matt26LFC Posted October 24, 2022 Share Posted October 24, 2022 Just now, sergmann said: Are your with 13th gen? Yeah, 13600K Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 24, 2022 Author Share Posted October 24, 2022 Let me test it on Air with 13th gen. Not tested before. If it doesn’t works fine with multiplier maybe I have another solution for it ? Quote Link to comment Share on other sites More sharing options...
Matt26LFC Posted October 24, 2022 Share Posted October 24, 2022 17 minutes ago, sergmann said: Let me test it on Air with 13th gen. Not tested before. If it doesn’t works fine with multiplier maybe I have another solution for it ? I tried 150Mhz BCLK, ran 7350Mhz. So at least we can do that for now Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 24, 2022 Author Share Posted October 24, 2022 Please select in Bios AVX drop 0 and AVX512 drop to 1 and you can change everything in OS. It`s not necessary to do more. If you still have problems with drop, please let me know. 1 Quote Link to comment Share on other sites More sharing options...
spl Posted October 25, 2022 Share Posted October 25, 2022 (edited) Good morning all, 5 different driver but no option of sli! Single Gtx295 no sli Bios x4b Edited October 25, 2022 by spl Quote Link to comment Share on other sites More sharing options...
intance Posted October 25, 2022 Share Posted October 25, 2022 So i tried to update X4b bios via Q Flash, now i have post code 98 and no boot, don't now what to do, can anybody help me? Quote Link to comment Share on other sites More sharing options...
sergmann Posted October 25, 2022 Author Share Posted October 25, 2022 Flash latest official bios via q-flash, after it flash x4b via bios. ps: which cpu do you use? Mems? I haven’t tested it now with 12600/12700 or 13600 CPU’s but 12900k/13700k/13900kf/13900k are fine. Quote Link to comment Share on other sites More sharing options...
intance Posted October 25, 2022 Share Posted October 25, 2022 12700k and G.Skill 6600 xmp f20b of f6 bios? Quote Link to comment Share on other sites More sharing options...
BOBKOC Posted October 25, 2022 Share Posted October 25, 2022 (edited) 29 minutes ago, intance said: 12700k and G.Skill 6600 xmp f20b of f6 bios? F20b. + ↓ https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=629321 optional https://community.hwbot.org/topic/210084-gigabyte-z690-tachyon/?do=findComment&comment=629314 Edited October 25, 2022 by BOBKOC 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.