March 3, 201213 yr Dafuq is going on with you, Viss. All those golden chips lately If karma is real, none of your Ivy chips will pass 5G QUOTE... but i hope he find the right IB too
March 9, 201213 yr Quick run temp -70 with save voltage Vcore 1.580 VTT 1.2 Volt VCCSA 1.150 Volt .....still not max out L150B608 SN : 1307 Malay http://valid.canardpc.com/show_oc.php?id=2288046
March 9, 201213 yr Quick run temp -70 with save voltage Vcore 1.580 VTT 1.2 Volt VCCSA 1.150 Volt .....still not max out L150B608 SN : 1307 Malay http://valid.canardpc.com/show_oc.php?id=2288046
April 8, 201213 yr 3930K Batch 315B502 http://hwbot.org/submission/2272599_kaidtor_3dmark06_2x_geforce_gtx_570_43930_marks http://hwbot.org/submission/2272601_kaidtor_3dmark03_2x_geforce_gtx_570_187583_marks
April 8, 201213 yr 3930K Batch 315B502http://hwbot.org/submission/2272599_kaidtor_3dmark06_2x_geforce_gtx_570_43930_marks http://hwbot.org/submission/2272601_kaidtor_3dmark03_2x_geforce_gtx_570_187583_marks
February 16, 201312 yr I've had degradation with 2 3930Ks both C2, Like the latest one did 4.7Ghz @ 1.34v, but now I have to use 1.36v to get 4.6Ghz both VTT VCCSA set to 1.05v 1.65v 2133mhz RipjawZs 8GB kit
December 2, 201410 yr Sorry if I revive this thread from the depths of the void jajaja Going again with a 3930K c2 with 3250B764 Batch on a Sabertooth X79 motherboard. Will test Massman method tomorrow . Looking forward for some good results. Will test with custom water setup. Last but not least... thanks for pointing out issues related with high voltages in VTT.
February 26, 20187 yr On 2/16/2013 at 3:36 AM, Warboy said: I've had degradation with 2 3930Ks both C2, Like the latest one did 4.7Ghz @ 1.34v, but now I have to use 1.36v to get 4.6Ghz both VTT VCCSA set to 1.05v 1.65v 2133mhz RipjawZs 8GB kit this happened to one of my 3930k C2 also. really can't say why these chip do this even though vtt,vccsa not that high..... any findings ?
September 13, 20195 yr 3244C562 (Costa Rica) - 1.120 VID on RIVBE - 5.6 GHz SP1M on LN2 but with poor cold scaling, could run benches down to about -60 but only got about another 100 MHz out of it vs. chiller and best runs were at -20!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.