Ivy Bridge 3570K/3770K Batch and Serial Numbers

[K404]

Ok, so buying CPUs in Poland is now guaranteed success now that XA has taken all the bad ones

 

I swear i'm doing something wrong with Ivy, I'm not binning, i'm still figuring out how to bench for more than 90 minutes without the board falling over. I'm about ready to set up a countdown timer for sessions and race for scores.

[sofos1990]

I swear i'm doing something wrong with Ivy, I'm not binning, i'm still figuring out how to bench for more than 90 minutes without the board falling over. I'm about ready to set up a countdown timer for sessions and race for scores.

 

Maybe bad insulation ? I think that this problem is common but not after 90 minutes. I start losing few Mhz after 2-3 hours. I'm not 100% sure but it's the paste that causes this.

[splmann]

today i tested how stable my new cpu is .

 

First bench 3d01 Nature (GPU GTX580 @1000 Mhz)

 

Edited October 22, 2012 by splmann

[Vivi]

for the love of human kind please switch to imgur.com splmann!

 

i really like your pics but takes a while to get to a size i can view .

[Alex@ro]

L225c029 or L226B541? Need to pick between these 2 ,please help

[DrWeez]

as per Random choice -> http://jklp.org/public/html/choose.html

 

L226B541 was selected good luck

[Alex@ro]

Cmon guys,no experience with these 2:)? C batches were good in sb times i reckon..

[splmann]

Try the C Batch

 

 

L225c029 or L226B541? Need to pick between these 2 ,please help

[Alex@ro]

ok,c batch there is

[slaske6]

I am very confused. after just one day bench on the CPU at 1.84 vcore, the CPU does not have the 6.7 ghz 32m.

my question is is it perhaps thermal grease inside the CPU or the CPU has already been downgraded.

test the air is at 5 ghz 1.255 and now it has increased to 1.275 with the same board.

i boots 6.1 whit 1,425 to 1.45 volts.

it would 6.2 32m stable at dice. 1.75 vcore and so not tested it on the dice again but will believe that it is not higher than the 5.950.

any advice for me ????

Edited October 28, 2012 by slaske6

[Vivi]

I am very confused. after just one day bench on the CPU at 1.84 vcore, the CPU does not have the 6.7 ghz 32m.

my question is is it perhaps thermal grease inside the CPU or the CPU has already been downgraded.

test the air is at 5 ghz 1.255 and now it has increased to 1.275 with the same board.

i boots 6.1 whit 1,425 to 1.45 volts.

it would 6.2 32m stable at dice. 1.75 vcore and so not tested it on the dice again but will believe that it is not higher than the 5.950.

any advice for me ????

 

thats how my other cpu degraded too, the internal heat is too much so it can't scale anymore.

 

Is your pot temp still at maximum? because when my cpu degraded my pot was always 10-20C warmer.

[Lagittaja]

3770K with bacth 3222B508 Costa Rica.

 

That one coming my way, gonna take a while though lol. I'll do some tests when I get it and report here.

[Alex@ro]

Any news on chips with s/n starting with 2V(proposal for 2v vcore )

 

S/N 2V218121A1282 Batch L225C209 arriving tomorrow.

 

That if there is any correlation at all between s/n and oc capabilities....

[slaske6]

thats how my other cpu degraded too, the internal heat is too much so it can't scale anymore.

 

Is your pot temp still at maximum? because when my cpu degraded my pot was always 10-20C warmer.

 

in the start we were running on the cpu there were a bit off cbb , byt now there is not . only under 105 blck ofcaurse .

and we had always the potte on max cold . it had only run on air 1 time . in bios whit 1.28 vcore it sayes the cpu is betwen 38-40 degreas. whit out any load . 2 -3 times the termal pasta lost contakt on cpu and we remounted to start over again

[Alex@ro]

hell yeah,received L226B541 instead,obvious crap,4.5 with 1.21,5ghz with 1.47 2 core spi32M....

[oanvoanc]

Okay so I have "magic" hand

 

9 CPUs:

 

1x Malay L225B @ 6.4-6.5 GHz 3DMark 03/05 4 cores

1x Malay L224C @ 6.7 GHz CPU-Z 1 core

1x Costa Rica 3224B @ 6.3 GHz CPU-Z 4 cores

1x Costa Rica 3224B @ 6.6 GHz CPU-Z 4 cores

1x Costa Rica 3230B @ IMC sucks, can't boot 2520 mem, CB - 175*C

1x Costa Rica 3230B @ 6.4 GHz CPU-Z 4 cores

1x Costa Rica 3230B @ 6.3 GHz CPU-Z 4 cores

1x Costa Rica 3230B @ 6.4 GHz CPU-Z 4 cores

1x Costa Rica 3230B @ 6.2 GHz CPU-Z 4 cores

 

Jeez... Got a 3223b Costa Rica myself and will try it these days. Hopefully its not similar to yours

[Andrix85]

3218B976 COSTA RICA with SINGLE STAGE:

 

- 4C/8T 5.40 GHZ 1.625V all 3D BENCHMARK except 3D VANTAGE

 

- 4C/4T 5.68 GHZ 1.65V all 3D BENCHMARK except 3D VANTAGE

 

Good for Ln2 ?

Edited November 6, 2012 by Andreat85

[Splave]

what temp is your SS? -40c?

[Andrix85]

what temp is your SS? -40c?

 

-51° IDLE, - 40°, -42° in FULL LOAD

 

I have tested 3D VANTAGE 4c/8t 5.3 GHZ @ 1.65V stable. Temperature reach -25° with CPU TEST

[XPOWER-Orange]

My 3770K L207A

4.5G pass all test 4C/8T@1.12v

5G boot win7 4c/8t@1.296v

[splmann]

1.296v looks not bad !

 

Try 32m

 

 

 

My 3770K L207A

4.5G pass all test 4C/8T@1.12v

5G boot win7 4c/8t@1.296v

[rivaldokfc]

1.296v looks not bad !

 

Try 32m

 

do you mean you are having this imc monster for sale? what is the price dude?

i have great interested in this deal.

Edited November 8, 2012 by rivaldokfc

[slaske6]

3229A858 suks ,

max is 4700 whit 1,35 vcore

testet 2 pieces and det best did 47 whit 1,35 the other 1.37 and stil no stable 32m

48 -49 -50 -51 52 no go at all , ha ha ha crap batch

[GUN'G'STAR]

3232b612

to be continued...

[Alex@ro]

Holy cow,dafuq i just saw ...