Massman Posted April 26, 2012 Share Posted April 26, 2012 Intro So, let's get a thread going! Format: stepping - wafer - max multithread bench - max singlethread bench V206003P # 1001: 6100 / 6300 (weak IMC, no CB, ES) L148C692 # 1336: ? / 6400 (no CB, ES) Quote Link to comment Share on other sites More sharing options...
El Gappo Posted April 28, 2012 Share Posted April 28, 2012 l210b630 6150 cpu-z full pot Quote Link to comment Share on other sites More sharing options...
jjjc Posted April 28, 2012 Share Posted April 28, 2012 L206B341 6140 cpu-z full pot, max spi 6040. Junk. Quote Link to comment Share on other sites More sharing options...
El Gappo Posted April 28, 2012 Share Posted April 28, 2012 (edited) So this is what real retails are like. Had better memory speeds on a thuban too.. Edited April 28, 2012 by El Gappo Quote Link to comment Share on other sites More sharing options...
El Gappo Posted April 29, 2012 Share Posted April 29, 2012 Well your chip doesn't have a matching suck ass IMC Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted April 29, 2012 Share Posted April 29, 2012 Well your chip doesn't have a matching suck ass IMC It seems like chips with good IMC's tend to clock well also. but ya 6150 full pot is pretty bad considering there are people benching on cascades at 5900-6000 at only -80c. Quote Link to comment Share on other sites More sharing options...
NoGuru Posted April 30, 2012 Share Posted April 30, 2012 Batch# L204B322 Booted at 4.2 about two times and never booted again. Quote Link to comment Share on other sites More sharing options...
thebanik Posted April 30, 2012 Share Posted April 30, 2012 Batch# L204B322Booted at 4.2 about two times and never booted again. and there were claims that IB is hard to kill........So what exactly did you do??? Quote Link to comment Share on other sites More sharing options...
Gamer Posted April 30, 2012 Share Posted April 30, 2012 L202B763 6Ghz PI on cascade with 1.792v Quote Link to comment Share on other sites More sharing options...
NoGuru Posted May 1, 2012 Share Posted May 1, 2012 and there were claims that IB is hard to kill........So what exactly did you do??? I didn't do anything but load a few drivers at 4.2 -80c. Got a new one today. Excact same batch, ut oh! Quote Link to comment Share on other sites More sharing options...
M.Beier Posted May 1, 2012 Share Posted May 1, 2012 Pieter.... Can you add cooling/temp? Would make it alot easier when browsing. Quote Link to comment Share on other sites More sharing options...
K404 Posted May 1, 2012 Share Posted May 1, 2012 I didn't do anything but load a few drivers at 4.2 -80c. Got a new one today. Excact same batch, ut oh! Those pesky drivers.... get ya every time! Quote Link to comment Share on other sites More sharing options...
BenchZowner Posted May 1, 2012 Share Posted May 1, 2012 Gave two E1 E.S. just... 2.08Vcore, both are alive and kickin' PLL down to 1.7V ( none of the two worked below 1.7Vpll ), and up to 1.925V ( none of the two POSTed above that value, debug 00 if I recall correctly on the MIVGZ ) Vimc up to 1.25V The better of the would hit 6.5GHz for validation if only I'd given it 2.1V - 2.125V but I didn't, felt sorry about it Can't wait to receive my first retails ( I have a good feeling ) Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted May 2, 2012 Share Posted May 2, 2012 My experience on the first chip... SR0PL Batch# L206A973 5.72GHz at 1.75V would do wp32 and wp1024. Trouble getting into windows at 5.8GHz, though with more time/voltage I believe it could do it.http://hwbot.org/submission/2279683_ http://hwbot.org/submission/2279684_ Cold boot bugs at -85C at the base of the pot, cold bugs around -115C at the base of the pot (my current temp probe reads -180 when dipped in LN2, so actual readings on probe were -75C/-105C). Tested CPU PLL from 1.7V to 1.95V (default read 1.812 in BIOS). Tested bclk from 105-110, trouble getting higher bclk to post. Tested CPU voltage from 1.0V to 1.75V. None of these items, with or without LN2 mode enabled on the MVG, made any difference at all upon the cold bug behavior of this particular chip from what I found. I did not test RAM. Really only tested cold bug behavior, and once I found I couldn't work around it with anything I was trying, I didn't want to press the chip any harder - it will be sold. Looking to get another from a different store (and hopefully different batch) in the next week or two. Quote Link to comment Share on other sites More sharing options...
Rosty Posted May 3, 2012 Share Posted May 3, 2012 (edited) 1m on cascade -100 3570k L211B175 5847 mhz 3770k L211B472 5898 mhz 3770k L204B356 6071 mhz Edited May 3, 2012 by Rosty Quote Link to comment Share on other sites More sharing options...
S_A_V Posted May 3, 2012 Share Posted May 3, 2012 3770K L152B567 #0321 - 58xx MHz - max boot Windows7 3770K L152B567 #0597 - 6505 MHz - max boot Windows7 (4C/4T, 1.92V, -185C) - http://hwbot.org/submission/2278526_ Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted May 4, 2012 Share Posted May 4, 2012 3770K L152B567 #0321 - 58xx MHz - max boot Windows73770K L152B567 #0597 - 6505 MHz - max boot Windows7 (4C/4T, 1.92V, -185C) - http://hwbot.org/submission/2278526_ Wow, that doesn't bode well for batch numbers meaning anything once again! Quote Link to comment Share on other sites More sharing options...
DOM. Posted May 4, 2012 Share Posted May 4, 2012 Don't know the info I'm not at home Retail no cb full pot http://valid.canardpc.com/show_oc.php?id=2355728 Quote Link to comment Share on other sites More sharing options...
Hiwa Posted May 4, 2012 Share Posted May 4, 2012 (edited) L206B302 didn't test max frq but only IMC 1600 BOOT 1800 CODE 23 haha incredible but real. PS: to who says CPU rated to 2133 tried 1600 1800 1866 2000 2133 2400 2666 2600 i RMA it tmr. Edited May 4, 2012 by Hiwa Quote Link to comment Share on other sites More sharing options...
Mikecdm Posted May 4, 2012 Share Posted May 4, 2012 3770k - L204B343 Malay - max cpu-z 64xx mhz. Quote Link to comment Share on other sites More sharing options...
El Gappo Posted May 4, 2012 Share Posted May 4, 2012 L206B302 didn't test max frq but only IMC 1600 BOOT 1800 CODE 23 haha incredible but real. PS: to who says CPU rated to 2133 tried 1600 1800 1866 2000 2133 2400 2666 2600 i RMA it tmr. My 3570 had a stinker of an IMC but not that bad lol. The difference between some of these chips is crazy. Quote Link to comment Share on other sites More sharing options...
DOM. Posted May 4, 2012 Share Posted May 4, 2012 don't Know The Info I'm Not At Home Retail No Cb Full Pot http://valid.canardpc.com/show_oc.php?id=2355728 L204b259 Quote Link to comment Share on other sites More sharing options...
ME4ME Posted May 5, 2012 Share Posted May 5, 2012 L206B007 Max valid: 6200mhz, max Superpi1M: 6100mhz, 1.95v needed. crappy CPU.... Quote Link to comment Share on other sites More sharing options...
Diabolo 80 Posted May 5, 2012 Share Posted May 5, 2012 3770K 3204B824 COSTA RICA 6417 max valid 1,92v fullpot no cb, cbb Quote Link to comment Share on other sites More sharing options...
splmann Posted May 5, 2012 Share Posted May 5, 2012 L206B302 didn't test max frq but only IMC 1600 BOOT 1800 CODE 23 haha incredible but real. PS: to who says CPU rated to 2133 tried 1600 1800 1866 2000 2133 2400 2666 2600 i RMA it tmr. Hey hiwa , i have the same batch L206B302 (Digitec) First boot with lose PSC Mem setting 2800 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.