June 8, 201212 yr I can see that there is a new Controll center and clickbiosII and a new intel EM driver out on msi¨s Dload page and there is a flash tool for the EM firmware and a updater but no new updates for it yet.. it is from the 5. of june http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2032
June 13, 201212 yr I've verified this issue with the help of Massman on MSI Z77A-GD65. Also found a temporary solution, apparently if opening ThrottleStop 4.0 in Windows makes the multiplier jump back up. Can someone please verify this on their board?
June 14, 201212 yr elmore pwnd me lmao do you think people with this issue should RMA or just hold tight, I mean there must be a fix eventually right?
June 14, 201212 yr throttle stop if I make any changes it drops to x8 multi from x16 LOL! you can thank massman for that fix
June 14, 201212 yr throttle stop if I make any changes it drops to x8 multi from x16 Haha, what? Should be enough to open it in "off" mode.
June 16, 201212 yr Hi boys. I have the same problem. I have used DRY ICE to overclock a 3570K. I can use the max molti 38x in the bios anf 1600MHZ strap RAM. I tried with 2600K and the same situation. With Phase Change I can get 53X with 3570K and 57X with 2600K. What can I try to solve this problem ? Edited June 16, 201212 yr by Andreat85
June 17, 201212 yr itd be best to tell us what other hardware you are currently using. My config is: MSI Z77 GD65 3570K / 2600K 2X2GB G.SKILL 1600MHZ CAS 6-8-6-24 2T ALI CORSAIR TX750V2 HDD CRUCIAL M4 COOLING: DRY ICE in this moment, and Phase Change for the usual bench
June 17, 201212 yr I'm locked at 38x with multi. I have try to flash v 10.3b2 bios with ME updated anche the last v 10.6b2 but same story. Max multi on bios 38X. How Can I do to change the ME version? I have seen that with 10.3b2 bios the ME version is always 8.0.1.1399, the same of v10.5 bios. I have flashed in DOS Edited June 17, 201212 yr by Andreat85
June 18, 201212 yr I have the 1399 ME VERSION. I try to flash the last 1464 but nothing. Do you say that I can try to flash an eralier verison ?
June 19, 201212 yr Yesterday i flash the new ME version 1464 with the bios 10.5V but anything, same problem 38x multi max. Today I put the sytem air cooled but the mboard turn on for many seconds and than torn off. I saw the red LED DrMOS and only one LED Phases. Why? In Italy today was very very hot, 38°, 39°.
June 22, 201212 yr Author I've verified this issue with the help of Massman on MSI Z77A-GD65. Also found a temporary solution, apparently if opening ThrottleStop 4.0 in Windows makes the multiplier jump back up. Can someone please verify this on their board? Just confirmed the solution on my board here at home. Using: - 3770K - Z77A-GD65 - Bios V10.5b3 - ThrottleStop 5.00 b1 (http://www.softpedia.com/get/System/Benchmarks/ThrottleStop.shtml) Board boots in at 16x, enabling ThrottleStop makes it jump up to 45x (as set in BIOS).
June 22, 201212 yr Author throttle stop if I make any changes it drops to x8 multi from x16 Try opening the soft and just uncheck 'BD PROCHOT' option.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.