Mr.Scott Posted September 4, 2012 Share Posted September 4, 2012 Bug with latest cpuz, changed fsb with clockgen but didnt update it in cpuz. 1.58 still works... Interesting. It works for me. Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted September 4, 2012 Author Share Posted September 4, 2012 Hum, can you send me two report.txt file at christian [at] hwbot.org, one before changing bus and one after changing bus ? (please include freqeuncy what it is and waht it should be in the email) Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted September 4, 2012 Crew Share Posted September 4, 2012 Interesting. It works for me. Â On A8N-SLI ? Â @christian Will do... Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted September 4, 2012 Share Posted September 4, 2012 On A8N-SLI ? Negative. DFI Ultra D. I would be very surprised if the type of board made a difference. Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted September 4, 2012 Crew Share Posted September 4, 2012 maybe Asus did something special Quote Link to comment Share on other sites More sharing options...
Crew Turrican Posted September 4, 2012 Crew Share Posted September 4, 2012 which os\service pack do you use? Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted September 4, 2012 Crew Share Posted September 4, 2012 XP with SP3 Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted September 4, 2012 Share Posted September 4, 2012 XP with SP3 Me too. Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted September 4, 2012 Share Posted September 4, 2012 maybe Asus did something special Think they'll charge more for it? Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted September 5, 2012 Crew Share Posted September 5, 2012 who knows? Quote Link to comment Share on other sites More sharing options...
GENiEBEN Posted September 8, 2012 Share Posted September 8, 2012 1.61.2 > 2293mhz 1.61.3 > 2265 Â GJ CPUZ. Quote Link to comment Share on other sites More sharing options...
XtremeCuztoms Posted September 22, 2012 Share Posted September 22, 2012 testing stuff... cpuz worked fine http://valid.canardpc.com/show_oc.php?id=2518955  2hrs later same board with a different chip (pent 4 540) cpuz rejects and says must update. updated... and i see they added some useless anti virus stuff to the install... now in winders, bus and fsb jumps all around... and using set fsb, cpuz doesn't change, just sits still and jumps around....  1.61.5x32 - not working 1.61.3x32 - working  now after reinstalling 1.61.3x32 and trying to validate, it works again, but an hr ago, trying to validate it said i need to update.  http://valid.canardpc.com/show_oc.php?id=2519026  so, i guess don;t use 1.61.5 then eh?  Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted September 23, 2012 Crew Share Posted September 23, 2012 I have exactly the same issue with 1.61.5. With fresh XP install everything is fine. After changing cpu, cpu-z goes wild. Im currently on an nforce2 mobo. Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted September 23, 2012 Author Share Posted September 23, 2012 @ XtremeCuztoms, contacted you via email. Â I have exactly the same issue with 1.61.5. With fresh XP install everything is fine. After changing cpu, cpu-z goes wild. Im currently on an nforce2 mobo. Â Do you have some more informations? Only happen acter changing cpu ? when you go back to the old cpu does it work fine? Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted October 26, 2012 Crew Share Posted October 26, 2012 Good News, error seems to be gone. Currently Im on a Epox 478 mobo, which had the same issue like the Asus A8N and everything is working correctly now. Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted October 26, 2012 Author Share Posted October 26, 2012 Glad it's fixed now  Hopefully we managed to fix everything  won't be able to do cpuz debug for the next 3 months but after that I will be in my new flat which will have a room dedicated for benching/OC and there will be plenty of systems ready plug&run for cpuz debug. Quote Link to comment Share on other sites More sharing options...
Crew Strunkenbold Posted October 27, 2012 Crew Share Posted October 27, 2012 Forget to say, used cpuz 1.61.8 beta from October 24. Nice Christian, hope that cpuz improves further! Quote Link to comment Share on other sites More sharing options...
TASOS Posted December 11, 2012 Share Posted December 11, 2012 (edited) The current version of cpuz needs an update for Sandy Bridge G645 CPU.  It reports the cpu as G850.   Very similar cpu's though. Compare http://ark.intel.com/compare/69116,53491  G645 http://ark.intel.com/products/69116/Intel-Pentium-Processor-G645-3M-Cache-2_90-GHz  G850 http://ark.intel.com/products/53491/Intel-Pentium-Processor-G850-%283M-Cache-2_90-GHz%29  If someone has direct access to cpuz dev.team , pass the info. Edited December 11, 2012 by TASOS Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted December 11, 2012 Author Share Posted December 11, 2012 The current version of cpuz needs an update for Sandy Bridge G645 CPU. It reports the cpu as G850.   Very similar cpu's though.  G645 http://ark.intel.com/products/69116/Intel-Pentium-Processor-G645-3M-Cache-2_90-GHz  G850 http://ark.intel.com/products/53491/Intel-Pentium-Processor-G850-%283M-Cache-2_90-GHz%29  If someone has direct access to cpuz dev.team , pass the info.  Done, can you send me the report.txt file to christian[at]hwbot.org  Hey all, As you all know, sometimes CPU-Z validations are invalidated even though the result is perfectly valid (eg: stock config). Although Franck, the developer of CPU-Z, doesn't owe it to anyone to fix his (free) software, he always seems keen to improve the validation process. All he needs is a bit of correct feedback!  So, when you encounter issues with CPU-Z, be it the application or the validation page, please save a TXT report. Franck cannot improve the software based on a .CVF validation, he absolutely needs the TXT .  You can find it under the about tab:   Once you have the .txt report, mail it (+ an explanation of the issue) to cpuz@cpuid.com  :ws: Quote Link to comment Share on other sites More sharing options...
TASOS Posted December 11, 2012 Share Posted December 11, 2012 Done, can you send me the report.txt file to christian[at]hwbot.org  ok I'll do it in the afternoon Quote Link to comment Share on other sites More sharing options...
TASOS Posted December 11, 2012 Share Posted December 11, 2012 e-mail sent. Quote Link to comment Share on other sites More sharing options...
TASOS Posted March 10, 2013 Share Posted March 10, 2013 There seems to be something wrong with 1.63 version of cpu-z. Â The first time (only) i open it , i get an error. Â Â Â Â ... and i'm not the only one. http://forums.anandtech.com/showthread.php?t=2301793 Â Any ideas ? Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted March 10, 2013 Author Share Posted March 10, 2013 Yeah, same here, it's very often that the first time I open CPU-Z I have this error but then I open it a second time and it's all fine. Quote Link to comment Share on other sites More sharing options...
GENiEBEN Posted March 10, 2013 Share Posted March 10, 2013 Happens if it doesnt get exclusive access. Bit annoying Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted March 19, 2013 Share Posted March 19, 2013 Happens if it doesnt get exclusive access. Bit annoying  Extremely annoying... been happening for a long time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.