Posted February 1, 201312 yr #1: 2000: Coppermine #2: 2000: Thunderbird #4: 2002: Thoroughbred All are missing
February 2, 201312 yr Author They why are they listed as stages listed stages: 14, actual stages: 11 Edited February 2, 201312 yr by Christian Ney
February 2, 201312 yr From the subcompetition page: The third stage of the Team Cup revolves around the CPU-bound 3D benchmark 3DMark Vantage Performance. For this sub-competition, which has one stage for Intel and AMD per year, you can use as much graphic card horsepower as you can find - the only limitation is the CPU platform to be used. There are no limitations on the amount of CPUs that can be used: if you manage to find a platform that can run 42 CPUs, it's allowed!
February 2, 201312 yr VALIDATION REQUIREMENTS Use 1 videocard core(s) in total. But scores posted with 3x680 etc. Is it 1 gpu or unlimited gpu's??
February 3, 201312 yr Ah, yeah. Copied the rules from the 3DMark03 sub-competition, but forgot to take out the 1xGPU requirement. Updated the competition front page, it should be correct now. The stage limitations were always correct, luckily. Thanks for the heads up! Good luck to all!
February 3, 201312 yr How about upcomming GPUs like Titan, will they be legit for Vantage teamcup? or only hardware which was available during the start of the competition
February 3, 201312 yr How about upcomming GPUs like Titan, will they be legit for Vantage teamcup? or only hardware which was available during the start of the competition Like all previous contests, hardware available before the stage start and no ES.
February 3, 201312 yr Why still a lot of 3DM Vantage submissions using GPU PhysX enable are not deleted, is the rule has been change n I don't know?
February 3, 201312 yr Crew Because the updated versions of Vantage don't use the GPU Physx for the CPU score. If you look at the CPU scores most of them should be fine...
February 3, 201312 yr Why still a lot of 3DM Vantage submissions using GPU PhysX enable are not deleted, is the rule has been change n I don't know? Vantage 1.1.0 has PPU disabled by default even if you have it enabled in Nvidia Control Panel. Just compare the CPU score with others if you're not sure about its veridicity.
February 4, 201312 yr Leeghoofd, GENiEBEN : Ok thx, I forget to upgrade my Vantage and get 80.xxx CPU Score with GPU PhysX enable only with Ivy @ 4GHz
February 5, 201312 yr I do not see a link for the back ground http://i.imgur.com/XPidgxL.jpg It's on every stage page.
February 9, 201312 yr Tyred making a submission in Vantage SC#5: 2006: Brisbane (G1), Egypt, Italy, Orleans (F2), Windsor, Santa Ana (F2), Santa Rosa (F2) With an Italy F2 cpu but got the " your submission is incorrect " As you can see it (Italy core) is listed in the header but below in the yellow field it is not . Same for Egypt.
February 9, 201312 yr I THINK you're right but, well, I'm no expert . I'll check with PJ and let you know if it get's added.
February 12, 201312 yr Polite request: Can Xeon E5645 be added to Stage 8? It's the only hexcore Westmere-EP Xeon from 2010 not on the list. Launch price was consistent with that of the i7 970, making it equally "high-end." Thanks for your consideration! edit - And to Stage 11 of the SPi 1M comp / Stage 6 of the 3DM03 comp? Edited February 12, 201312 yr by Dead Things
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.