Crew gavbon Posted October 16, 2013 Crew Share Posted October 16, 2013 Batch L307B243 http://hwbot.org/submission/2414656_gavbon_superpi___1m_core_i7_4770k_6sec_428ms 5.6GHz 1.65v Super 4c 8t SUPERPI 1M Did reach 5.8GHz but motherboard died lol also does 4.8GHz @ 1.34v Cinebench 11.5 stable 4c 8t Is it a good chip? Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted October 16, 2013 Share Posted October 16, 2013 Batch L307B243 http://hwbot.org/submission/2414656_gavbon_superpi___1m_core_i7_4770k_6sec_428ms 5.6GHz 1.65v Super 4c 8t SUPERPI 1M Did reach 5.8GHz but motherboard died lol also does 4.8GHz @ 1.34v Cinebench 11.5 stable 4c 8t Is it a good chip? look for lowest possible voltage needed for 5ghz superpi 32m at ambient cooling. these numbers are not comparable. Quote Link to comment Share on other sites More sharing options...
Gunslinger Posted October 16, 2013 Share Posted October 16, 2013 (edited) My new 4670K requires 1.4V for 4.5Ghz on air. batch # 3306B354 Costa Rica chip #21 and still no 6GHz for me. Edited October 16, 2013 by Gunslinger Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted October 16, 2013 Share Posted October 16, 2013 My new 4670K requires 1.4V for 4.5Ghz on air. kill it with fire. Quote Link to comment Share on other sites More sharing options...
sskmercer Posted October 17, 2013 Share Posted October 17, 2013 Hey Bullant, i finally got around to installing the 4770k this morning. I've only put 1.148 through it so far and boots into XP/WIN 7 @4.3 and runs 32M nicely. Temps are a bit highish as i'm only using the stock HSF and have a funny feeling it's not seated the best. Where as my first 4770k i had to go to and past 1.3v just to boot @4.3 let alone running anything. Going to reseat HSF late today and see if temps improve or hopefully WC gear turns up. So much more potential then my other one. This one got cooked from i believe was possibly bad install on my part (still learning here) although was exchanged no problems and got the same exact batch number. Also my WC gear has turned up and installed a few hours ago and leak testing tomorrow. Then i'm running my little 4340 just to test it out as it's my first go at WC. Once i'm good with that and then the real fun begins and hope i get a nice GEM like Bullants did from teh same batch. Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted October 17, 2013 Share Posted October 17, 2013 Seems I've just found very good cpu 4670K L315B366 4250 It's good, isn't it? :banana: Quote Link to comment Share on other sites More sharing options...
Splave Posted October 17, 2013 Share Posted October 17, 2013 seems nice to me! can volts stay so low when you raise mem and cache? what is cooler? seems to run very cool is only concern, I think hot chips scaling more. LN2 time man! Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted October 17, 2013 Share Posted October 17, 2013 seems nice to me! can volts stay so low when you raise mem and cache? what is cooler? seems to run very cool is only concern, I think hot chips scaling more. LN2 time man! will try a little It is water cooling not mounted, I've just put waterblock on cpu and pressed it plate for socket 775 from TT Big Thyphoon Quote Link to comment Share on other sites More sharing options...
Nanok Posted October 17, 2013 Share Posted October 17, 2013 Hope it scales and good coldbug MaJOr Found a new L310B487 hope its a keeper, will test later. Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted October 17, 2013 Share Posted October 17, 2013 Work fine with 5000MHz cache on air and high memory frequency Didn't tried to set 1.187V for SuperPi 32, just set 1.2V and found cache voltage(1.325V). Quote Link to comment Share on other sites More sharing options...
Splave Posted October 17, 2013 Share Posted October 17, 2013 beauty! Quote Link to comment Share on other sites More sharing options...
sskmercer Posted October 18, 2013 Share Posted October 18, 2013 Very nice MaJ0r. Hope it scales well for you mate if you go COLD. Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted October 18, 2013 Share Posted October 18, 2013 4670K L315B366 3392 4500 SuperPi 32m 1.15V 4900 didn't load OS 1,35V 4670K L315B366 1933 4500 SuperPi 32m 1.22V 4900 didn't boot 1,35V 4670K L315B366 3944 4500 SuperPi 32m 1.12V 5000 1,39V SuperPi 32m 4670K L315B366 4250 4500 SuperPi 32m 1.05V 5000 1,187V SuperPi 32m 4670K L315B366 4112 4500 SuperPi 32m 1.1V 5000 1,325V SuperPi 32m I think it's not bad batch. Can sell last cpu Quote Link to comment Share on other sites More sharing options...
Nanok Posted October 18, 2013 Share Posted October 18, 2013 My second L310B487 do 5Ghz 1.325vcore Quote Link to comment Share on other sites More sharing options...
Ali Man Posted October 18, 2013 Share Posted October 18, 2013 My second L310B487 do 5Ghz 1.325vcore Dam bro, sell that to me Quote Link to comment Share on other sites More sharing options...
Nanok Posted October 18, 2013 Share Posted October 18, 2013 Sorry is sold already Quote Link to comment Share on other sites More sharing options...
suzuki Posted October 19, 2013 Share Posted October 19, 2013 my first haswell : I will post more details soon. Quote Link to comment Share on other sites More sharing options...
ralle_h Posted October 20, 2013 Share Posted October 20, 2013 Nice catch for the first one, which batch is it? 4670K L315B366 3392 4500 SuperPi 32m 1.15V 4900 didn't load OS 1,35V 4670K L315B366 1933 4500 SuperPi 32m 1.22V 4900 didn't boot 1,35V 4670K L315B366 3944 4500 SuperPi 32m 1.12V 5000 1,39V SuperPi 32m 4670K L315B366 4250 4500 SuperPi 32m 1.05V 5000 1,187V SuperPi 32m 4670K L315B366 4112 4500 SuperPi 32m 1.1V 5000 1,325V SuperPi 32m I think it's not bad batch. Can sell last cpu L315B366 is kickass indeed. VID 1,010 Quote Link to comment Share on other sites More sharing options...
dhenzjhen Posted October 20, 2013 Share Posted October 20, 2013 I don't get it man, why you have to block everything besides the boobie? :ws: Quote Link to comment Share on other sites More sharing options...
Andrix85 Posted October 20, 2013 Share Posted October 20, 2013 L310B490 6.100 benchable 3D 4c/4t @ 1.725V in bios, real 1.69V...Next test with 1.8V... Quote Link to comment Share on other sites More sharing options...
suzuki Posted October 22, 2013 Share Posted October 22, 2013 (edited) k,i had some time to test the cpu,all the test were made with 2 vents ,one of 3000 rpm and the other one of 1200 on prolimatech Genesis at 25 degrees room temperature.. Ring/cache needs 1.165v for 4900 . The cpu works like this on Gene VI : Boot : 4.5 at 1.05 v 5.0 at 1.21 v 5.1 at 1.27 v 5.2 at 1.35 v 3d : 4.5 at 1.07 v 5.0 at 1.24 v Edited October 22, 2013 by suzuki 1 Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted October 23, 2013 Share Posted October 23, 2013 Tested my best 4670k. I've had a lot of problems with my two OS so didn't make any good results, just checked some ideas. Validation http://valid.canardpc.com/f3tgdj also SuperPi 32 doable at 6500MHz Quote Link to comment Share on other sites More sharing options...
Splave Posted October 23, 2013 Share Posted October 23, 2013 congrats man, CB ? Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted October 23, 2013 Share Posted October 23, 2013 congrats man, CB ? -122 -125C, tested two cpu from this batch and both had the same CB. I used Extech thermometer, it shows in LN2 - 191C, so mb CB is little bit higher but it is just my guess Quote Link to comment Share on other sites More sharing options...
MaJ0r Posted October 24, 2013 Share Posted October 24, 2013 Boom! http://valid.canardpc.com/1qmnnt Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.