October 1, 201410 yr I finally got it submitted http://hwbot.org/submission/2640849_ i will come back ! That's what I was hoping you would say Now when the teamcup is over, I will play too . I'll have to give this another shot soon and see if I can get anywhere near these results. Good work guys! Awesome! Will be good to see
October 4, 201410 yr Since I'm impatient and suck at waiting here is my best run so far from a few days back. 14m 16.610s http://hwbot.org/submission/2642925_ I meant to do SPD tab not two Motherboard tabs
October 4, 201410 yr I'm not really sure as i don't know what the stock volts is but it's set to +300mv which I imagine is too much for water but I had to try booting 20 odd times before it would post with that nb
October 6, 201410 yr Good old vmod is most likely possible. You never should've said anything and I owe a thanks to Zeroluszero for the final push in getting the mod done 14m 14.625s C8-9-9-8 1T TWCL5 @ 2.2v http://hwbot.org/submission/2644440_ Edited October 6, 201410 yr by newlife
October 6, 201410 yr You never should've said anything and I owe a thanks to Zeroluszero for the final push in getting the mod done 14m 14.625s C8-9-9-8 1T TWCL5 @ 2.2v Jebus, dat vdimm. Really fast time, awesome
October 8, 201410 yr 14m 14.297s | G.Skill Pi 2000C6 @ 1300 8-12-8-26 1T tWCL6 90ns http://hwbot.org/submission/2645764_i.nfrar.ed_superpi___32m_fx_9370_14min_14sec_297ms CPU frequency is ~4998MHz, like in this screenshot: http://i.imgur.com/qCwtv7D.jpg. Just a cpuz glitch at the moment of taking the screenshot. newlife, you did an excellent job! Took me some time to beat your score. Edited October 8, 201410 yr by I.nfraR.ed
October 8, 201410 yr Very nice time! I may give it another go on air but don't think I can beat that without cold
October 8, 201410 yr My goal was 2666, but not gonna happen. Board is loosing 2nd channel or very unstable at over 2600. Maybe it's the IMC, or it needs 2T, dunno. Also tried BBSE - no go. I may try again on a Gigabyte board without UEFI.
October 9, 201410 yr I'll give it a shot within the next few days. Have some new RAM sticks coming in and I hope the system runs well with them. If not..... Oh well.
October 9, 201410 yr Very nice Infrared,cold PSC should see some nice gains as well Edit This was air? I haven't ran Amd so not sure of the max freq on air,2600Mhz cl8 seems good from what Ive seen Edited October 9, 201410 yr by Bullant
October 9, 201410 yr Bullant, ram was on air, yes. Not a problem for the PIs, they should be good for at least 2666 tight on Intel. I put the cpu on SS to clock the CPU-NB higher, because 2900 on air was not enough. The problem on AMD is that at high frequency it starts to drop a channel or if I manage to boot in dual channel it's not stable. To be honest, I haven't played much 32M on Vishera, so can't tell much details. Not sure if board or cpu related. I have no Samsungs to try though and BBSE was a no go. Also tried Hypers for 2400 8-8-8-24 tWCL6, but didn't manage a full run. From all the mems I have, Pi's were the best. It was painfully slow before Stilt's BDC and I really preferred 32M on K10. Now when it's a little faster and there's some activity ion the thread, it is time to play . Wish I see you both here, but I know it is too sloooow for you...waiting 15min every time BTW, there's one of my runs with ram on LN2 http://hwbot.org/submission/2426500 but not sure this was the optimum. I didn't like that board, it had some serious problems with bios..at least for me. Apart from that, we had some other runs with ram on LN2, but on a different board 1444 7-11-7 seems more like it... http://hwbot.org/submission/2463549_i.nfrar.ed_aquamark_radeon_hd_7970_363212_marks or 1330 6-10-6, but he already sold that cpu http://hwbot.org/submission/2465491_more_aquamark_radeon_hd_7970_314300_marks As far as I remember 1400 6-10-6 was also possible with the first cpu, but don't remember subtimings. Definitely going to try with that board again, although for that kind of frequencies CR=2T is required. Edited October 9, 201410 yr by I.nfraR.ed
October 9, 201410 yr Is cold on the CPU required for 2600 1t or can you do that on air/water? I can run up to 2475 1t and 2500 2t on water and 2600 2t on cold I'm also going to be getting some Dice today to give this a go at again and hopefully 3300mhz on the nb
October 9, 201410 yr I could do the same mem clocks on air. Cold is required for higher mem and cpu-nb frequency. CH5 is not very efficient though.
October 9, 201410 yr Those 9xxx CPUs must have a pretty a good IMC and nonetheless 2600 c8 1t is awesome for AMD
October 9, 201410 yr Just what I expected. The power of Gigabyte 970A-UD3. It lacks tWCL in bios (board sets it at 8) and can't run 1T at 2600, but still faster. It is almost as fast as Crosshair III Formula with K10 and it seems not bad with K15 too. Also a very very tricky board. Shaved one second off. Edited October 9, 201410 yr by I.nfraR.ed
October 9, 201410 yr Insane!!! I pretty surprised you're a second ahead with twcl 8 and 2t. Do you gigabyte 990fx boards run twcl below 8 or are they locked as well?
October 9, 201410 yr Not sure if it's locked, more like on "auto". 990FX-UD3 rev3 has tWCL control, I think. Last time I tried, it was way more inefficient though. I could try it tomorrow. tWCL doesn't seem to have a big impact anyway. Edited October 10, 201410 yr by I.nfraR.ed
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.