nachtfalke

yes, when have you more than one run with ~same score , then is not a bugged score .. sorry for inconvenience:)

i think your run is bugged, your gpu is on limit cooling , you need more than 1440 gpu freq for this score:)

X79 give you better vantage GPU score compared clock/clock with X58...y need test it:) also X79 is more permisiv with cpu/ram clock compared with Z77 ...i think the pci controler from cpu is better ...

vai ma coane , cand dai matale cat o submisie te umpli de puncte ca broasca de par=))))

check the LN2 mode jummper -move to OFF( left side) and slow mod switch move to oFF or install OS with LN2 mode enbled ..but push more vcore in cpu..for example 1.150v when the LN2 mode is enabled ..the cpu is undervolting (0,994 v) and some cpu´s wont boot ../not anymore stable i hope the info help you

want to prove that're HKEPC is all cheaters

+1 Aris , i´m agree with you , something here stinks

3223B829 1.4v+ 5ghz 4c/8htt = crap ..

M5F it is also very good choice, i waiting answer from intel rma netherlands about my ivy cpu´s.. Good Luck with raking:)

Thank´s , Yep :)it is good MB , all my cpu´s work very fine and low volt on this board...verry strong cpu VRM ,need more working on bios support for BBSE ram compatibility.. the 2D and 3D efficiency is verry similar with Asus boards ....need test soon with LN2:)

very nice

TRUE!!! We can compare these "twik´s" as lucid virtu in 3D ... hardware is useless here ..."Lucid Virtu PCM" power:D

it was very good arhitecture , but yet focus on IVY ...i wait answer from rma about my ivy cip´s:)

nice one man , gratz:)

i have same problem here , but is not vga ( tested with ~10 vga´s)is not mb( tested with 3 different mb) ..it is the cpu fault ...the pci-e controller inside the cpu is degraded( i think my last LN2 session damage it) all gpu´s on this cpu work x8 pci-e1.1 ( on first mb slot -x16)... on second slot ( x8)gpu-z and bios read x2 1.1... i benching with agp on ivy=)))) these days i will send it to RMA

bravo, push the gpu freq more:) the new driver has great performance also on fermi cip:)

in 2k1 cypress arhitecture don´t scalling with gpu core ...you need high cpu clock:)

no twiking man:)

verry agressive voltage for SS:(

i have one too =)) nice work man:)

nice work man:)

thanks all

hi, Sven...use new driver (285.xx)for G200 gpu , in 2k3 will have a better bost than 175.xx ...hint over 100k:)

i foget , instal rivarivatuner and set 3d3 overrider

hi:) use so: install driver 275.33 or 28x.xx, driver on performance , also OS on performance download inspector 1.9.4.1 and then: "Open nvidia inspector and go to the elevated settings . The press the third button from the right "show unknown settings from nvidia predefined profiles" Then you will see some more options available . Search lower at the "unknown settings" There is an option "pre_d3d9_compatibility_bits" . Just pull the arrow and select the 0x00000040 option ." ( this is the principal tweak for fermi arhitecture in 2k1 and aqua) set lod 3 in inspector and run my GT : DL-LL-CH-DH-LH-N-CL ( this last 3-5 times) enjoy:)