Jump to content
HWBOT Community Forums

TASOS

Members
  • Posts

    1588
  • Joined

  • Last visited

  • Days Won

    52

Everything posted by TASOS

  1. You used the wrong wallpaper in both your results.This is round-3. http://hwbotnews.s3.amazonaws.com/Competitions/1376-1380_OldSchoolBestSchool2016/Backgrounds/OSiBS%20S2%20Wallpaper%20R3.jpg
  2. You made it look sooo simple PM incoming about something in the cpu database.
  3. For competitions , we usually follow the charts of the hwbot database. In my opinion , the allowed hardware is the following http://hwbot.org/hardware/processors#key=s479 Socket M & socket P , have their own categories
  4. Well , dont go way ... reports coming
  5. Oh ,ok Yes i just saw that macsbeach98 , already reported my score. Let's pass it to Christian then , and let him decide about it.
  6. Oups I uploaded a wrong screenshot , with my latest result on 3dmark 2000 stage. Since i cannot edit the result anymore , can a moderator please fix it ? Many thanks
  7. Take off your waterblock and check the cpu contact. If the cpu heatspreader footprint looks ok , then take of the cpu and check the general condition of the socket pins. If everything looks ok , put everything back and make sure you dont tighten your waterblock too much. Test again your o/c
  8. Nice find , both links
  9. Might be the price ? Just saying ... Yesterdays example , with cpu + waterblocks http://www.ebay.de/itm/151983340976?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
  10. Aaahhh Recycling companies are responsible for the loss of many great boards of the past. The actual history of computing getting vanished ? Cant blame them though.
  11. [joking mode on] At this point , i believe it's the perfect time to say , that XTU has given a lot to the overclocking community ... and it should be awarded with even more points , here at Hwbot. More points to XTU !!! Hip-hip Hurray ... [/joking mode on]
  12. I want to ask , if i can use a Quadro2 (which is also NV15) for the stage of 3dmark2000. http://hwbot.org/hardware/videocards#key=quadro2_pro Can i ?
  13. Bios chip flashes ok , with F3 official. So it's working.
  14. Maybe it's my board , that acts strange. I tried multiple times to flash to a newer bios bersion and everytime i did , the board was not booting afterwards. I found the latest beta on a webarchive page. I can give it to you , if you want it.
  15. I suspect , that he is reporting results in general , not showing any kind of favoring ? I will be patient , then.
  16. You really dont understand ... Please someone in his native language explain him ....
  17. It's not about me personally. It's about my fellow team members. Example of one , of your reported results (and it's not the only one) http://hwbot.org/submission/725814_hipro5_cpu_frequency_pentium_4_2.66_ghz_3560_mhz // P.S. Dont report jmke's results ... also He was the man , that was verifing the results back then
  18. @liqmet PLEASE Stop reporting results with no obvious reason Especially the old and very old results. The majority of old results from 2006,2007,2008,2009 ... have been checked by moderators. Just an example. You cant report such a result for missing photo or non-working links. Read the rules and use common sense. Use the report button wisely Thank you
  19. @Gumanoid Since we used the same board (Gigabyte GA-7IXE) , i wanted to ask you a couple of things , in case you happen to know , or you actually faced the same problems. 1)With a hardware modded Pluto @1.85 & 1.90 volt , the board refused to boot. 2)Having a rev 1.1 board , i couldnt upgrade to bios F7 official or FAA beta. When i flashed to those two bios versions , the board was dead , not booting. The only operating bios was the F3 (i need to check-out the F4 beta). 3)Hardware modded cpu @1.80 volt. When reading pll output with a software prog. on my next boot i was having 2.05 volt Vcore !!!
  20. Too hard to work without a Goldfinger , on a Pluto cpu that you dont have a clue about it's limits. I only had Sunday morning available (since it was not accepted to have the whole Sunday) I soldered numerous times those tiny resistors on the athlon pcb. But i couldnt get the result i opted for.
  21. Any chance of extending this round-1 , for the whole weekend ??? It would be nice to have Sunday (a resting day from work) free to play. If everybody agrees of cource.
  22. Very good result and also good clocks for both the vga and cpu. What Vcore ?
  23. Houston We have a resurrection :ws: Many thanks to my friend Stelaras :celebration:
×
×
  • Create New...