TASOS

Take off your waterblock and check the cpu contact. If the cpu heatspreader footprint looks ok , then take of the cpu and check the general condition of the socket pins. If everything looks ok , put everything back and make sure you dont tighten your waterblock too much. Test again your o/c

Nice find , both links

Might be the price ? Just saying ... Yesterdays example , with cpu + waterblocks http://www.ebay.de/itm/151983340976?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Aaahhh Recycling companies are responsible for the loss of many great boards of the past. The actual history of computing getting vanished ? Cant blame them though.

[joking mode on] At this point , i believe it's the perfect time to say , that XTU has given a lot to the overclocking community ... and it should be awarded with even more points , here at Hwbot. More points to XTU !!! Hip-hip Hurray ... [/joking mode on]

I want to ask , if i can use a Quadro2 (which is also NV15) for the stage of 3dmark2000. http://hwbot.org/hardware/videocards#key=quadro2_pro Can i ?

Bios chip flashes ok , with F3 official. So it's working.

Maybe it's my board , that acts strange. I tried multiple times to flash to a newer bios bersion and everytime i did , the board was not booting afterwards. I found the latest beta on a webarchive page. I can give it to you , if you want it.

I suspect , that he is reporting results in general , not showing any kind of favoring ? I will be patient , then.

You really dont understand ... Please someone in his native language explain him ....

It's not about me personally. It's about my fellow team members. Example of one , of your reported results (and it's not the only one) http://hwbot.org/submission/725814_hipro5_cpu_frequency_pentium_4_2.66_ghz_3560_mhz // P.S. Dont report jmke's results ... also He was the man , that was verifing the results back then

@liqmet PLEASE Stop reporting results with no obvious reason Especially the old and very old results. The majority of old results from 2006,2007,2008,2009 ... have been checked by moderators. Just an example. You cant report such a result for missing photo or non-working links. Read the rules and use common sense. Use the report button wisely Thank you

Let's skip it , skipper

@Gumanoid Since we used the same board (Gigabyte GA-7IXE) , i wanted to ask you a couple of things , in case you happen to know , or you actually faced the same problems. 1)With a hardware modded Pluto @1.85 & 1.90 volt , the board refused to boot. 2)Having a rev 1.1 board , i couldnt upgrade to bios F7 official or FAA beta. When i flashed to those two bios versions , the board was dead , not booting. The only operating bios was the F3 (i need to check-out the F4 beta). 3)Hardware modded cpu @1.80 volt. When reading pll output with a software prog. on my next boot i was having 2.05 volt Vcore !!!

Too hard to work without a Goldfinger , on a Pluto cpu that you dont have a clue about it's limits. I only had Sunday morning available (since it was not accepted to have the whole Sunday) I soldered numerous times those tiny resistors on the athlon pcb. But i couldnt get the result i opted for.

Any chance of extending this round-1 , for the whole weekend ??? It would be nice to have Sunday (a resting day from work) free to play. If everybody agrees of cource.

Very good result and also good clocks for both the vga and cpu. What Vcore ?

Houston We have a resurrection :ws: Many thanks to my friend Stelaras :celebration:

Anybody close to Atlanta ?

Kind request , not to forget Z170-P D3 !!!

stock cooling 861 core is way more than average !!!

I dont think the bios work arround is the right thing to do. Funny thing is , they already released a newer stepping at late Oct 2015 Now they have to make a newer one. RMA purpose My cpu freezes during 768k FFT length calculations on Prime95

Since not all people think the same way , you must take into consideraion that there is a big part of hwbot users , who see the placing on a chart as a recognition of their effort in total. For those users , the difference of beeing 8th instead of 9th ... really means something. ... and after all , what's beeing asked here (correcting the final result on the leaderboard) is only fair. Not asking for a favor.

Consider yourself lucky enough to own this 1.0Ghz Tbird cpu and forget all the rest.

You dont really need an ultra. There are other ways to hit the target. So if the price gets high , just drop it.