TASOS

Ticket ID: 1847 Priority: Low Actually almost the same as B815 , with different Intel HD gpu speed. http://ark.intel.com/products/55657/Intel-Celeron-Processor-B810-2M-Cache-1_60-GHz http://www.cpu-world.com/Compare/292/Intel_Mobile_Celeron_Dual-Core_B810_vs_Intel_Mobile_Celeron_Dual-Core_B815.html Should we add it ? Cause i see mixed results in the B815 section.

This result also needs a correction regarding real cpu speed , for statistical reasons.

What's the real frequency for this bench ? Is it 5770 ? Somebody must edit and correct it , even for statistical reasons.

I keep getting this message

Does this Gigabyte service-tool still work ? http://gigabytedaily.blogspot.gr/2012/02/really-cool-gigabyte-mobo-warranty.html Is there an alternative for Europe ?

Somebody must update the 1st post. Especially with the retail results , that are usefull to regular users.

I had asked the exact same thing in the past and was told that this limitation is for security reasons.

Yes in Windows XP SP3 , it doesnt show a score.

He did that to a couple members of my team also.

This is my easy 5G validation. I can boot to windows with this voltage and run something light like 1M http://www.hwbot.org/submission/2448296_tasos_cpu_frequency_core_i7_4930k_5009.93_mhz/ And this 5.2G is on the edge (watercooled). http://www.hwbot.org/submission/2448300_tasos_cpu_frequency_core_i7_4930k_5200_mhz

???

We have similar fpo/batch. (mine is 3325A911) der8auer also has (had) a similar one. Ours are 4930k though. I can cinebench @ 4.9 with 1.38 volt watercooled. @5Ghz i need +0.12 volt and temps are raising fast. I need less than 1.2 volt (s.a.) for 3000 Mhz superpi32m But every cpu (and imc) is unique and yours might need some extra voltage for high mem clocks. I believe that anything under 1.20 for both vtt and sa , is supersafe.

The 1st time i tried for a max. memory speed with these two good looking sticks , i was on a 3770k and Asus MVG , with everything air-cooled. I got an amazing 1572 Mhz http://hwbot.org/submission/2368903_tasos_memory_clock_ddr3_sdram_1572.2_mhz/ Back then , i was almost certain , it was my IMC that was the limiting factor. Cause later at a subzero effort , the result was the same. In fact it was more a bclk limitation on 2933 divider. Now at my 2nd try with these sticks , still air-cooled , i got the result below , on a X79 Asus RIVE. I couldnt believe that an Ivy on X79 , could push these hynix CFR so far. (even for just a max validation). http://hwbot.org/submission/2444026_tasos_memory_clock_ddr3_sdram_1655.1_mhz Now i'm still curious , if this is the end for this sticks ... or it's my IMC again. I know i have an upsolute max 189.67 bclk on 166 strap with this board. http://hwbot.org/submission/2434844_tasos_reference_clock_rampage_iv_extreme_189.67_mhz I've got to find a Haswell system ... it's the only way.

It's very obvious and perhaps they dont even know that this is not allowed. Someone must talk to them. I see it's a new team with only 4 members and HWSW is the team captain. ... Also it's not only the above 2 results they shared. http://hwbot.org/submission/2426628_hwsw_pcmark_2005_core_i3_550_21822_marks http://hwbot.org/submission/2426661_alonewolf_pcmark_2005_core_i3_550_21587_marks There's plenty more ...

Thanks That's almost the upsolute max , on air-cooling.

Nice move.

From what i have read ... The bios flashback methology (in this case) works only if your board has a bios version 4004 and later.

I use this version provided by shammino , and it works fine.

That's the problem. It doesnt let you do the conversion. I was in the same place as mcnico63 , a week ago. read here http://www.xtremesystems.org/forums/showthread.php?276839-ASUS-Official-X79-Motherboards-Support-Thread&p=5207481&viewfull=1#post5207481

Sorry , but it wont work. The procedure you wrote is correct. But it wont accept the bios flash , with an Ivy-E cpu. You must have an SB-E cpu to do that. Especially if it has an old ROM type bios.

I had the same problem with my RIVE and 4930k. You need a Sandy Bridge-E cpu , so that you can flash to the latest bios (that supports Ivy Bridge-E). If your board has an early bios (ROM type) you need to do the conversion to CAP first (with bios 2105)

How is your IMC like ? Have you tested with PSC or BBSE ?

// update here Upsolute max on air-cooling (temp related) 4.82Ghz cinebench @ 1.36 volt http://hwbot.org/submission/2428248_tasos_cinebench_r11.5_core_i7_4930k_14.64_points .

i7 4930K(Retail) @ 4.7GHz cinebench @ 1.29 volt air-cooling Batch: 3325A911 http://hwbot.org/submission/2427875_tasos_cinebench_r11.5_core_i7_4930k_14.32_points

For example ? Search for all bench with 3770k , is ok ?