websmile

#3 and #6, apacer and flarex, sold to phobosq. #7, the 4330 12-11 GB3 air-kit sold together with an undelidded 5,3ghz cb15 1,24v 8086k with decent imc to mr anonymous

Good morning, up for sale are my ddr4-mems, all work and are in excellent condition. Due to the fact that I will need a few sticks for daily and maybe cross tests I will not sell at mems listed but end the sale when enough is gone A2-memory 1. 4x8GB G.Skill Trident Z RGB DDR4-4266 C17-18-18-38 1,45v Awesome specs and excellent ram, tested in random pairs (after sn) for 2067Mhz 12-11-11-28-220 1T Spi 32m 1,96 and 1,965v , geekbench and other benchmarks work around 1,95v and less for me on apex xi. I made a raw win 7 waza test which worked as well, but ymmv. 2133MHz 12-11-11-28-220 with 2T worked 2,06-2,07v for GB3, these are a2 layout so this is best my combination can do. In box with sticker 2. 2x8GB G.Skill Trident Z Royal gold DDR4-4266 C19-19-19-39 1,40v Barely used, tests ended up at 2067MHz 12-11-11-28-220 1T 2,01v for GB3 and 2,03v for SPi32m, 2133MHz 12-11-11-28 2t worked at 2,125v for GB3 and similar benchmarks. Strong kit in mint condition with box and sticker 3. 2x8GB Apacer Commando DDR4-3200 C16-18-18-38 1,35v Used for daily after being purchased to check ICs, taiphoon burner showed B-dies, not sure this is correct because best oc I got was 3866 C18 at 1,35v and 4000c12 did not work at 2,05v. Reliable, good looking daily stuff 4. 2x8GB G.Skill Trident Z SW DDR4-4500 C19-19-19-39 1,45v Unicorn kit, the sole G.Skill highend kit I ever had that has a2 layout despite being non-rgb. Extremely strong high voltage kit, 2067 12-11-11-28 1t works arond 2,05-2,07v for GB3, Spi 32m and so on, 2133-2140Mhz 12-11-11-28 220 1T worked for GB3 and similar benchmarls around 2,15-2,17v. The only kit I really checked for 2400+ c14 last months, 2411Mhz 14-13 2,05v GB3, 2425MHz Spi 32m 14-13 worked as well but that´s already above max of my current board/cpu system. In mint condition with box and fan. A0/A1 memory 5. 4x8GB G.Skill Trident Z Red DDR4-3866 C18-19-19-39 1,35v Genuine quad kit, and around best you will find despite the specs out of the box being not that impressive. Tested in random pairs after SN for 2100 C12-11-11-28 220 1T 2,08v GB3 and other benchmarks of similar quality for both pairs, 2133MHz 12-11-11-28 1T worked at 2,15v on one half for GB3, second half did CB 11.5/15 etc at similar voltage but should pass gb3 with tweaking too. Bulk 6. 2x8GB G.Skill FlareX DDR4-2933 C16-16-16-36 1,35v B-die to my surprise, checked for 2067 12-12-12-28 220 2,13v CB11.5 and C15, 2050 worked for GB3, not tweaked or optimized. Should be nice budget mems or AMD stuff. 7. 2x8GB G.Skill Trident Z DDR4-4133C19-21-21-41 1,35v My best a1 kit so far, tested for 2165MHz C12-11-11-28 220 1T 2,08v GB3 air and for example 2067 12-11-11-28 waza on Impact 8 at around 1,95v real. The kit was, like no4, already sold a while ago but buyer dodged out and bought 700 euro Kingston 4600 - I hope he already recovered from the brain damage he must have suffered from. In box with sticker Prices (shipping not included) 1. 550 Euros 2. 275 Euros 3. 65 Euros sold 4. ^..^ 5. 420 Euros 6. 90 Euros sold 7. 550 Euros sold in combination with a 5,3g 1,24v 8086k Payment is possible with bank transfer at euro zone and paypal (buyer covers fees or gift payment!!! ). Shipping within EU is around 15-20 Euros, for countries outside of this things will get very expensive, so please get a quote. After recent experiences me and others made with shipping to certain countries like china I am most likely not willing to take a risk to ship there. I will offer mainboards, cpu etc most likely next days in a different thread

Don´t miss this opportuniy - get schwifty

Is this on single stage? ?

My bad then, with a potentiometer this is ideal way to handle the problem ?

The problem is that you make the board useless for some ddr2 ics and you might even get a cold boot issue on sticks that do not have this before - for cold use it is a good option though

@Noxinite it is called (cold)volt boot issue because sticks don´t boot at 1,8v but need normally around 2,2v at least - you can use a volt mod but for a lot of people it is simply enough to boot with other sticks, set volts to 2,2 or above and change sticks PCB is always a factor, but not the biggest one for raw mhz because it is more of a stability factor

The elite league status is not my problem if we talk about "extra-points" . I see more of a problem in the hardware you use partially not being your property as well as getting live support by vendors and other ocers on events like the world record stage, this make it very hard for me to determine why (if ever)there should be extra hardwarepoints for live events. On the other hand you can argue you don´t have this at oc world cup for example where you bench all alone, but special BIOS versions (we had this in the past), handbinned special mems etc are also involved, plus for these strict comps where you have the biggest pressure and benchmark alone you often have MHz cap which makes the results no records anyway and you get competition points anyway. Which leads back to why you should get more points for a live stage event when you make a supported bench-session for a vendor, get (binned) hardware, LN2, tipps by nick shih or shamino and so on.

The thought about this is that I wanted to introduce this several times (either a comment to the score "Judge approved live score" or a non reportable status or something similar) but this is hwbot and no one ever gives a damn about this. Better luck now for you

? Slacker ?

Junk ? Sub 8m or no more beer ??

XTU the new version, bugbench and more benchmarks which haven´t had maintenance or updates for 5 years or more and have artificial point calculation based on baselines set 10 years ago so we can have fun with bugged results

The funny thing is that these accounts are somehow related to real persons at least sometimes - when Luumi posts is says Justin Wong, who is a guy that benched iirc and now works for asus

Ich dachte du bist in Rente, Markus^^

Give that man a beer, he will bench even faster

Wow, flashing mems is too easy nowadays xd

Boint hoarder :P

All done, thanks for space, hwbot

Wow, great run - with Asrock power :D

DDR4 Hynix was only the cherry on the ice cream - I cannot remember any decent ic they made from ddr1 times and afterwards Let´s hope Micron is really back so we another contender to challenge Samsung

Might be interesting, but I don´t like Hynix, so Klevv is on my blacklist^^

Cleared for i9 - won´t work even with better mems with 8th gen at least for 4266 1T - so don´t set hopes to high unless you upgrade and find a decent imc. Nontheless good to see Dumo running G.Skills again

This is nothing new, and sadly nothing is cleared - you need a 9th gen cpu for this to work - same as on apex x and old version of xp bios with 4133 divider with any layout. I already talked to an asus guy about this and think this will not change. Basically any a2 kit capable of doing 4266 will do this because it seems to be an RTL and iol issue. Let me know when this topic is really cleared because I refuse to spend my cash on useless i9 as you know

4500s and the 4000c19 32gb kit are sold. Bump for the corsair LPX red

Junk ?