websmile

Germany is flooded with these ? - btw, I don´t hope these are the cheap rejects I sold you way below market price

Awesome clocks and result

At 1,75v, did you set maxmem to available max of 2,5gb? I left you a note at AF that B-die needs maxmem at x64 bit OS because of its characteristics at tight timings and/or high volts, when I look at your 32m I don´t think you set this...

How about XP? Look at evga forum for matching BIOS (0.92 should work which you use) and guide for xp installation

That result was done with an engineering sample^^ - nontheless, in germany for example cpu is retail since a few days and available at shops

That´s inpressive, good job

Cheap boards, must....resist

Junk :p

Looks good

George´s kit - good to see you give them a go, shipping took that long again that I thought htey sent them to bulgaria again

Haswell-e scales, variances are normal though like on all platforms. Normal way to bin these is search best low volts from 4,5ghz upwards, the higher you test (4,7ghz is already above average binning frequency) the better

Zadak is a division of Apacer and they only sell, if they do at all, at asia it seems

Seems to be imc then, at least 4600 is already much better than I saw on some other CPUs

It seems the tests were quite successful^^

Ooops

This rocks

No IGP? This sucks

Just for the record, a 5960X which does CB15 4,7GHz at 1,2-1,23v is top tier, since when is a cpu of that quality unbinned? You can always discuss about scaling but if you don´t like the price, grab ten from ebay and hope to find a cpu doing anywhere near this, 1,19v 4,7ghz went way above shop price in its days. If you don´t like prices, send PM next time and hope seller can follow your reasoning

No LN2 and good cpu is always sad story

Noobism detected ? - disable hardware recognition, the wrapper is too old and due to no update it prevents files to be accepted. Happy benching ?

I sold my kit because I got practically zero feedback by Zadak and it became clear that there obviously was no interest in any kind of longer partnership. They are in Japan now^^

@EDORAM If the kit boots with 1,35 or higher, that´s what imc needs - normally Intel cpus are quite reliable at these voltages, still the voltage is quite high. Not sure if this is healthy when used for years Calvin, if you can´t do 4600c14, try 0.9v vtt and vary settings, it is for sure not mem issue if this doesnt work

Use G.Skill, no compability problems even with a2

No MOCF-love? I am shocked ?

OK, you killed hwbot.org Micka - no mercy for you ?