Massman Posted August 29, 2014 Posted August 29, 2014 (edited) Alright, what's the magic stepping? Edited July 14, 2015 by Massman Quote
TaPaKaH Posted August 29, 2014 Posted August 29, 2014 5960X QFRA 3413B684 4500 1.16V (32M, wPrime 1024), 5000 1.45V (32M) Quote
Crew Leeghoofd Posted August 29, 2014 Crew Posted August 29, 2014 (edited) 5960X QFRA 3431B010 cooled by Noctua DH 15 4500 1.2 Wprime 1024, 4500 CB 11.5 and R15 at 1.23Vcore not tested further yet Edited August 29, 2014 by Leeghoofd Quote
gubben Posted August 30, 2014 Posted August 30, 2014 Find this from Kinc ( ASUS) , no info of batch. http://www.sweclockers.com/forum/55-intel/1317995-haswell-e-owners-club-post14830578/ http://bit.ly/VTMLTt Quote
flanker Posted August 30, 2014 Posted August 30, 2014 hm, not bad batchs. My hand will have only one chance in shop . God, please, the option must be lucky . Quote
Massman Posted September 2, 2014 Author Posted September 2, 2014 Find this from Kinc ( ASUS) , no info of batch.http://www.sweclockers.com/forum/55-intel/1317995-haswell-e-owners-club-post14830578/ http://bit.ly/VTMLTt Impressive retail Quote
Crew Vivi Posted September 2, 2014 Crew Posted September 2, 2014 Impressive retail i see what you did there! haha Quote
Hiwa Posted September 3, 2014 Posted September 3, 2014 5960X QFRA 3413B684 4500 1.17 Cinebench Aircooling Quote
Crew Leeghoofd Posted September 3, 2014 Crew Posted September 3, 2014 (edited) Nice CPU Hiwa : ) tested any higher ? Edited September 3, 2014 by Leeghoofd Quote
sskmercer Posted September 4, 2014 Posted September 4, 2014 I've picked mine up today, although I need to wait for the motherboard to get in stock which should be either tomorrow or early next week. Can someone explain the S-spec bit though. The rest of you have "QFRA" and mines SR20Q, so hopefully it serves me half decently. Batch #3420C104 Will post screens once the motherboard is here:D Quote
Hiwa Posted September 4, 2014 Posted September 4, 2014 Nice CPU Hiwa : ) tested any higher ? 8/16 max 4900 1.43 just boot cinebenc is not possible because temp problem. Quote
rsnubje Posted September 4, 2014 Posted September 4, 2014 5960X Batch L418C676 (retail) 4625 MHz @ 1.4v CB 11.5 / 4.5GHz @ 1.3v CB 11.5 - watercooled by Kraken X60 5960X Batch 3413B684 (ES) 4625MHz @ 1.4v CB 11.5 - watercooled by Kraken X60 5960X Batch 3413B921 (ES) 4500MHz @ 1.4v CB 11.5 - watercooled by Kraken X60 Actually I'm not even very disappointed in my retail after hearing some bad stories. It's still not very good tho. Quote
sskmercer Posted September 4, 2014 Posted September 4, 2014 5960X Batch L418C676 (retail)4625 MHz @ 1.4v CB 11.5 / 4.5GHz @ 1.3v CB 11.5 - watercooled by Kraken X60 Actually I'm not even very disappointed in my retail after hearing some bad stories. It's still not very good tho. Hi rsnubje, do you mind me asking what board you are using and any guides for how you've achieved this. This might be teh wrong place to ask these questions but it's my first time with an X processor and just trying to learn as much as possible before my board gets here. Cheers Quote
rsnubje Posted September 4, 2014 Posted September 4, 2014 For the result of the Retail chip I used the Asus X99E-WS and for the other 2 I used the Asus X99-Deluxe. Basicly I used the same steps as with normal Haswell. Quote
sskmercer Posted September 4, 2014 Posted September 4, 2014 Thanks for that mate. I'm getting the gigabyte X99-SOC Force board, so hopefully that turns out ok when bios's mature a bit. Also i've just started to experiment with DICE and loving it, so hopefully I'll get some good results once I learn a bit more. Quote
rsnubje Posted September 4, 2014 Posted September 4, 2014 I'm currently preparing the X99 SOC Force for cascade Quote
Silent_Scone Posted September 6, 2014 Posted September 6, 2014 1.38v 4.75 so far, straight out of bios on 125 strap 3422B720 http://www.3dmark.com/3dm/3952340? quick run and bench stable Quote
Crew Leeghoofd Posted September 6, 2014 Crew Posted September 6, 2014 Nice one Silent Scone, this done on air or water ? Can you verify Wprime1024 and or Cinebench R15 plz (this to keep data aligned) Quote
Silent_Scone Posted September 6, 2014 Posted September 6, 2014 Sure, will do this afternoon . This is on water. Quote
coolice Posted September 13, 2014 Posted September 13, 2014 3422B720 5.72/4.94GHz 1.65v http://i.imgur.com/PAEdImQ.jpg Quote
steponz Posted September 15, 2014 Posted September 15, 2014 (edited) Just picked up today. Retail testing on Crappy Air Cooling 5960X 3427B280 Vid - .987 Cinebench R15 4.5 ghz @1.21v 8C/16T stable Update: 9/17/2014 Cinebench R11 4.5 ghz @1.21v 8C/16T stable Wprime32 4.5 ghz @1.20v 8C/16T stable Edited September 18, 2014 by steponz Quote
Hazzan Posted September 15, 2014 Posted September 15, 2014 Just picked up today. Retail testing on Crappy Air Cooling 3427B280 Vid - .987 Cinebench R15 4.5 ghz @1.21v 8C/16T stable seem good cpu ...waiting your ln2 result, sometime good vid not guaranted will be good on ln2 result. Quote
CL3P20 Posted September 17, 2014 Posted September 17, 2014 try disable core#0 and check VID again 3422b711 - R15 stable @ 5.5ghz 6c/12t - 1.57vcore / 2.1vccin http://hwbot.org/submission/2629960_ *cpu needs 1.18v for 4ghz air ... IMC topping out ~3.9ghz on cold regardless of volts Quote
steponz Posted September 17, 2014 Posted September 17, 2014 Why would I turn off core 0? My chips is pretty stable at 4.5 1.21.. confused.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.