No.....Es chip....splave chip need 1.375v for cineb at 5ghz.....this chip is undelided, maybe in the next days he will get ln2 for try it undercold

I tested L519B740 and L519B743.

 

Both VID 1.296.

 

Both XTU stable @ 4.8GHz 1.46v

 

Should be able to pass 4.9GHz at around 1.5v but limited by high temps... No delid

My retail i5-6600K. About scalping: http://www.modlabs.net/blogs/i5-6600k

 

Updated!

Im waiting now for RMA process. I can be 14 days without the chip. Hope new one will be with lower VID

Third chip is on the way.

Wow. I guess it's quite an advantage being so close to where Intel ships their RMA chips from. It's usually 3-5 days from when I ship it out to when I receive a new chip!

For me it's 3 days incl pick up

I used to live in Louisville, KY where their US RMA center is. The thing is... they made me ship it to them even though I worked two miles away

 

So it still took three days back then.

I did RMA with local eshop Mironet.cz, so it take some time I think ...

avoid from L524B520 6700K, horrible chip. VID 1.33v, on air 5G 1.50v not 32M stable, after delid on LN2 -160C 4/8 6.1G valid 1.90-1.95v -.-

Guy, did u try to raise up pll termination voltage and pll bandwith??

i used on ln2 1.6-1.70v pll termination

We use pll at 1.8 1.9 when we was in taiwan

cheers, good to know but i dont think this cpu will fly 3-500mhz higher from that ~0.2v pll

I dont think so me too.....but next time try !!! Pll bandwith 6 or 8 ....pll termination increase the temperature of the cpu underload.....but when u are in windows u have to set 1.8v for remove the CB! U can upper that value for search some extra mhz....but the cpu going to be hotter;)

cheers bro, will do! on the gigabyte G1 board, you have much easier job you have like 3-4 settings at all what you can raise. with loan cpu i reached ~6.5G 1.80v! it was L526 something, going to look for that batch.

Uhuhu very good;))) i say only this for help....i dont want to teach no one;)

 

Cheers thanks for sharing;)

sure, we are all here to help each other and share experience no worries bro

Updated!

[ATTACH]3201[/ATTACH]

Boot 5g 1.375

Hwbotprime at 1.38v

L519b740

Cooling? Delidded? Has this golden chip been taken subzero yet?

 

dat Titanium Edition

Raijintek triton 25 degrees ambient

Not delidded

Ln2 in some hpurs

Awesome. Keep us updated and thanks for contributing

Hi,

Tested 10 pcs L525B503 Malaysia retail(and one ES for comparison) with three kind of tests:

1) Maximum Boot to Windows 7 64-bit, 4C/8T, 1.35V VCore

2) Maximum Cinebench R15 Frequency, 1.35V VCore (there's Vdroop to around 1.31-1.32 IIRC)

3) Lowest VCore to run 4.6Ghz Cinebench R15 4C/8T

 

*Aircooled, Noctua NH-U12S+Noctua NF-F12 iPPC-3000, 25C ambient*

 

This is the result:

 

 

All the details about the specs, methods can be found here if you guys interested(need google translate though )

 

Cheers,

Edited August 27, 20159 yr by Lucky_n00b

I like it! Will you be testing the better samples for higher frequencies (5GHz)?