l0ud_sil3nc3 Posted August 31, 2015 Posted August 31, 2015 (edited) Doing some cleaning, will list all in this thread in phases, make sure your angus is peppered Everything ships via USPS Priority Flat Rate (US48) and I only accept payment via bank transfer, or preferably a USPS money order. Buyer covers all fee's and international please pm about additional shipping cost. so on to the goods. . . Here is the first phase of DDR3 cleansing: Each module is tested individually in the outside slot, with waza on Z97. Kingston 2133c9 (2x2GB) BDBG, only tested for spec. $28 shipped XMP http://i.imgur.com/16vI6fH.png http://i.imgur.com/9dO1DoV.png Corsair 1866 c7 (3x2GB) Hypers. These are chews old modules, the fins are a bit banged up but other than that they perform flawlessly. I expect X48/X58 results to be much stronger since Z97 isn't the best platform for Hypers. Tertiary timings are almost LN2 PSC spec. $180 shipped A 2133c7 http://i.imgur.com/ZeZWkO3.png B 2000c7 http://i.imgur.com/nNuJN6Z.png http://i.imgur.com/Zompa0k.png 2041c7 http://i.imgur.com/FEFqflD.png http://i.imgur.com/ZeZWkO3.png C 2133c7 http://i.imgur.com/KXiTJjD.png http://i.imgur.com/wNFxzqE.png Core i5 655k all that's left. . . http://i.imgur.com/XoY2QID.jpg Intel Xeon X5260 $5 + shipping (will include sticker) http://i.imgur.com/frEsrXc.jpg Intel Xeon X5270 $6 + shipping (will include sticker) http://i.imgur.com/gC1g9uL.jpg Asus Maximus 8 Gene $88 shipped LET on top via syringe method and Plastidip on the back, ready to bench http://i.imgur.com/PT2GXZil.jpg OG SF3D Inflection CPU Pot $125 shipped Pot back plate and all mounting hardware included, as well as insulation. (No Fluke K-Probe). http://i.imgur.com/dESps2nl.jpg Kingston MFR/AFR for days, everything from 3200-3400 spec in this tray. Rambus Yang binned special modules inside! There are some 4000 11-16-16-28 @ LN2 modules hiding in here, PM if interested. http://i.imgur.com/MYjD9IQl.jpg http://i.imgur.com/alG28RG.jpg?1 Asus Rampage V Extreme X99 motherboard. Plastidipped front to back via rattle can and the socket has been repaired by a colleague of mine in the OC lab (pins straightened) in late 2017. The board comes bare, no retail box or accessories, what you see is what you get. $145 shipped http://i.imgur.com/I7ETqFW.jpg http://i.imgur.com/H0wubel.jpg http://i.imgur.com/m7n5e4l.jpg http://i.imgur.com/qlz43YN.jpg G.Skill 4133 c19 Samsung E-Die (2x4GB) kit (F4-4133C19D-8GTZ?) highest bin for this ic $75 shipped MFR/AFR tray everything in here from 2666-3400 bin, only the first four modules are AFR the rest are MFR Make Offers Connoisseurs DDR3 Tray This is best of what I have binned during the DDR3 era and the list includes (GTX2's, 2666c11/2800c12 CFR, 2400c10 CFR SS, 3000c12 MFR, 2600c10 DOM Plat Samsungs, 2000c6/2400c8 PSC, 2133c8 BBSE) I have most if not all retail boxes for these kits, so if you're a collector I can add them for additional shipping costs. Not in any hurry to sell, but I will entertain offers Some new additions fs: KP Cooling Atlas Bench Stand $45 shipped Asus Z790 Apex OG, will come bare board only no accessories $405 shipped Intel 12100F no AVX512, great clocker (see here: https://hwbot.org/submission/5461380 )comes in a clam shell $90 shipped Asus Rampage V Extreme X99 fully boxed with all accessories (OC Panel etc. . .) $265 shipped EVGA EVbot with full retail box and all cables, driver disc etc... Was a gift from EVGA Jacob in 2015 and was only used a handful of times with my EVGA GTX 980 Classified so that's the firmware it will ship with. $165 shipped Edited October 11 by l0ud_sil3nc3 2
bob(nz) Posted August 31, 2015 Posted August 31, 2015 (edited) Confirmed I am in for 4 binned sticks of 2666c13's... Edited August 31, 2015 by bob(nz) changed memory type :)
noliso Posted August 31, 2015 Posted August 31, 2015 Interested in 2 modules of the dominator platinum 2666 C10 - PM incoming
l0ud_sil3nc3 Posted August 31, 2015 Author Posted August 31, 2015 Did you test the L3014? Yes one or two of them, I can't remember but take a look at my profile and find any associated subs.
l0ud_sil3nc3 Posted August 31, 2015 Author Posted August 31, 2015 sorry guys forgot to mention the prices quoted are for US48, International inquire about additional cost please.
OC Maximus Posted August 31, 2015 Posted August 31, 2015 (edited) BTW, where did you pick up that memory tray. Pretty cool. Payment Sent. Edited August 31, 2015 by OC Maximus
l0ud_sil3nc3 Posted August 31, 2015 Author Posted August 31, 2015 BTW, where did you pick up that memory tray. Pretty cool. Payment Sent. ebay and bought them in 5 packs.
GtiJason Posted August 31, 2015 Posted August 31, 2015 BTW, where did you pick up that memory tray. Pretty cool. Payment Sent. Just ordered two on friday, this is the best deal I could find, maybe find slightly better for 5pk. http://www.ebay.com/itm/x1-ANTI-STATIC-DIMM-Memory-tray-container-for-50PC-Server-Desktop-DDR1-DDR2-DDR3-/321847232004? FREE BUMP....Sorry to threadjack, but I have a feeling The Purge™ will be at the top of our sale page on its own for a while
bob(nz) Posted August 31, 2015 Posted August 31, 2015 Louds inbox is overflowing - heh Just waiting on total cost and will transfer funds
Jimba Posted August 31, 2015 Posted August 31, 2015 (edited) Kingston Hyper X 2333 (c9 single sided BDBG) $65 shipped - How much is shipping to Australia and any results? Edited August 31, 2015 by Jimba 1
rivaldokfc Posted August 31, 2015 Posted August 31, 2015 (edited) hi. please pm me your pp address. i will give you a US warehouse address and transport. i want to lower the shopment cost.. Edited August 31, 2015 by rivaldokfc
rivaldokfc Posted September 1, 2015 Posted September 1, 2015 paid for 1 kit of Panram ddr3 3300c12 MFR. please check the PP account...
P5ych0 Posted September 2, 2015 Posted September 2, 2015 Whats Batch and VID from this 5820 K ? You have Benched this Chip ? iam interessted, and also for G.SKILL MFR Kits
OC Maximus Posted September 5, 2015 Posted September 5, 2015 (edited) Dimastech Hard showed up yesterday and everything was in perfect working order. Thanks again! Edited September 8, 2015 by OC Maximus
bob(nz) Posted September 11, 2015 Posted September 11, 2015 Thanks George - sticks arrived yesterday - awesome packaging - no way they were ever going to get damaged
Recommended Posts