ducegt Posted April 17, 2021 Posted April 17, 2021 Asus released 2603 Beta Version -Add Resizable BAR support for Nvidia RTX 30 series cards to potentially deliver more performance to gamers in select titles. Hopefully Dsanke can port it soon! 1 Quote
dmytri2009 Posted April 21, 2021 Posted April 21, 2021 (edited) On 4/16/2021 at 2:50 PM, Focusnik said: Yesterday, Dsanke posted a new version of 2503. http://www.smxdiy.com/thread-712-1-1.html https://pan.baidu.com/s/1VKrcLdh4wfLJujbpY6Sm5w Code: xs7q Does anyone can download it? https://www.mediafire.com/file/9di63jw78loeks6/ROG-MAXIMUS-IX-APEX-ASUS-2503.7zip/file Edited April 21, 2021 by dmytri2009 1 1 Quote
Prodej RTX Posted April 25, 2021 Posted April 25, 2021 On 6/7/2020 at 7:09 PM, davidm71_2 said: Just updated the microcode on the Apex IX Dsanke 2301 rom for 906-EC to version D6 from version CA. Sorry I only updated one microcode for my 9700K but I think it should work on the 9900K as well. Also may have removed the Asus Bios-Lock. Just flashed and can confirm its a working rom: http://www.mediafire.com/file/0ydhw2ruesg7y6q/ROG-MAXIMUS-IX-APEX-ASUS-2301-D6-Unlock.7z/file I try this but not working. Bios flashback - not working. EZ - not working. What is the right procedature? I have to use this method: https://www.win-raid.com/t3908f16-GUIDE-Grub-Fix-Intel-FPT-Error-or-BIOS-Lock-Asus-Other-Mod-BIOS-Flash.html ? And no HW mod to BIOS chip needed? I think it is only about flashing the BIOS named M9A.cap THX a lot Quote
dmytri2009 Posted April 25, 2021 Posted April 25, 2021 3 hours ago, Prodej RTX said: And no HW mod to BIOS chip needed? I think it is only about flashing the BIOS named M9A.cap THX a lot To flash this bios mod you need to use hardware chip programmer device, like this one Quote
dmytri2009 Posted April 25, 2021 Posted April 25, 2021 19 minutes ago, Prodej RTX said: Ok, so HW mod is easier way. THX. Use QQLT or QTJ2 CPU, they aren't needed any intrusion in MB hardware, only a moded bios.? Quote
Prodej RTX Posted April 25, 2021 Posted April 25, 2021 I have no experience in modding bios via programer. Soldering is not problem. I am just looking for other option. Quote
Uno132 Posted April 27, 2021 Posted April 27, 2021 (edited) On 3/14/2021 at 9:19 PM, Karel648 said: I have the same problem with Asus ROG Maximus IX Extreme. Please help You dont have to join any pads on Maximus 9 Extreme, just use CH341A programmer and connect it through JSPI connector (above JSPI you have 3 pins to choose which chip you want to flash, if you connect to each other left and middle pin you can flash 1st bios chip and if you connect middle and right one you can flash second chip). Try this bios: https://disk.yandex.ru/d/O6a5jdcdXaQKGg (supports every cpu, even 9900k with HT). Of course after flashing just unconnect every cable (especially the bios switch one) Edited April 27, 2021 by Uno132 Quote
kwx47 Posted April 27, 2021 Posted April 27, 2021 (edited) Friends, I have a little problem. I wanted to change the bios image, dump the asus boot logo and repainted it, added a couple of small images in photoshop. The size and weight of the file turned out to be the same as before, but the program says that it should be smaller. I compressed the image, flashed the bios with the new image, and put it on a flash drive. I renamed the bios to creative. rom and used flashback to install a new bios, but there is no picture. Then I took another picture, even smaller, and it also did not appear. Next, I just took a picture from the anime and intel inside and the picture appeared. This is some kind of randomness. Who knows what the problem might be? One image loads, the other does not, although both of them weigh less than the stock asus logo. I just wanted my custom logo 1st pic - stock 2nd pic - 496kb 3rd pic - random anime pic APEX IX (2301 dsanke) + 9700k + 3200c16 (Hynix A-die) pizdatoelogo.bmp huetaaaaaa.bmp Edited April 27, 2021 by kwx47 Quote
Andrix85 Posted May 30, 2021 Posted May 30, 2021 Hi guys, there is TURBO V version for XP ? Thanks a lot Quote
Mikecdm Posted May 30, 2021 Posted May 30, 2021 6 hours ago, Andreat85 said: Hi guys, there is TURBO V version for XP ? Thanks a lot I'm pretty sure that i used the same version for all OS. With xp however, on some of the coffee lake bios, the multi won't go passed whatever is set in bios. In that case, you need to set multi high in bios, then boot in with slow mode. Once in windows you can lower multi or raise it, but can't exceed what was set in bios. Quote
Andrix85 Posted June 1, 2021 Posted June 1, 2021 On 5/30/2021 at 6:57 PM, Mikecdm said: I'm pretty sure that i used the same version for all OS. With xp however, on some of the coffee lake bios, the multi won't go passed whatever is set in bios. In that case, you need to set multi high in bios, then boot in with slow mode. Once in windows you can lower multi or raise it, but can't exceed what was set in bios. Thanks Mike! I'm using 0094 bios with a 9600KF and if i set multi in BIOS than is setting also in XP. It's strange perhaps, 3dmark01 start but than It blocks during loading first bench. I try @ 4.8-5.0ghz, nothing. If i start the bench @ default (4.3ghz) works fine. I don't understand where is the problem. Quote
Mikecdm Posted June 2, 2021 Posted June 2, 2021 2 hours ago, Andreat85 said: Thanks Mike! I'm using 0094 bios with a 9600KF and if i set multi in BIOS than is setting also in XP. It's strange perhaps, 3dmark01 start but than It blocks during loading first bench. I try @ 4.8-5.0ghz, nothing. If i start the bench @ default (4.3ghz) works fine. I don't understand where is the problem. did you enable the option in the bios? I think it's called extreme tweaking or something like that. Quote
Andrix85 Posted June 2, 2021 Posted June 2, 2021 8 hours ago, Mikecdm said: did you enable the option in the bios? I think it's called extreme tweaking or something like that. Yes, i enable EXTREAME TWEAKING option and also TURBO BOOST MODE...now seems to work, no stop during bench 01. To try with single stage and Cascade. Seems 9600KF is no good...Required 1.45v for 5ghz with AIO cooling. Quote
Malarkey966 Posted June 5, 2021 Posted June 5, 2021 I have an apex 9 with 9900KF. I was benching my GTX 750 on DICE and out of nowhere the MB started to smoke. Should I replace the transistor or just pull it out and the board will work properly? If I have to replace it, do you have any idea what kind of transistor it is? Thanks Quote
dmytri2009 Posted June 21, 2021 Posted June 21, 2021 (edited) M10A 2603 BIOS version transplantation for M9A with Resizable bar support by dsanke https://www.mediafire.com/file/5dugae6mqdv0kf5 Edited July 9, 2021 by dmytri2009 4 1 Quote
Mayk-Freak Posted June 28, 2021 Posted June 28, 2021 (edited) On 6/21/2021 at 9:23 AM, dmytri2009 said: M10A 2603 BIOS version transplantation for M9A with Resizible bar support by dsanke https://www.mediafire.com/file/5dugae6mqdv0kf5 Thanks! Edited June 28, 2021 by Mayk-Freak 1 Quote
ducegt Posted July 2, 2021 Posted July 2, 2021 I have also successfully flashed 2603 and have rebar working. ? dsanke 1 Quote
dhedy Posted July 3, 2021 Posted July 3, 2021 On 21/6/2021 at 16.23, dmytri2009 said: Transplantasi versi BIOS M10A 2603 untuk M9A dengan dukungan bilah Resizible oleh dsanke https://www.mediafire.com/file/5dugae6mqdv0kf5 can this mod work for win 11 with i7 9700kf ?? Quote
dmytri2009 Posted July 9, 2021 Posted July 9, 2021 On 7/3/2021 at 5:59 PM, dhedy said: can this mod work for win 11 with i7 9700kf ?? There isn't Windows 11 released yet, but I'm sure, if your stuff can work with Win10, it can work with 11 and 12 too ? Quote
Gumanoid Posted July 18, 2021 Posted July 18, 2021 On 7/2/2021 at 6:28 AM, ducegt said: I have also successfully flashed 2603 and have rebar working. ? dsanke EZ Flash or Flashback? Quote
ducegt Posted July 24, 2021 Posted July 24, 2021 On 7/18/2021 at 3:07 PM, Gumanoid said: EZ Flash or Flashback? External BIOS programmer, but you should be able to use Flashback with the mod described in the thread. Quote
AlexRay Posted August 26, 2021 Posted August 26, 2021 (edited) On 7/2/2021 at 6:28 AM, ducegt said: I have also successfully flashed 2603 and have rebar working. ? dsanke Has anyone tested this setting with RTX card? Nvidia said you should use 10th or 11th Gen CPU with RTX 30 series card to work with. Will ReBAR work with Coffee Lake? Quote After you’ve updated all your components and installed our Game Ready Driver, you can verify Resizable BAR is working on your system by opening the NVIDIA Control Panel. Edited August 26, 2021 by AlexRay Quote
demon_g_-1985 Posted December 28, 2021 Posted December 28, 2021 Здравствуйте, а нет ли схемы или boardview для cl-2 94v-0 e241819 asus rog maximus ix formula...Нигде найти не могу, очень нужно!!! Спасибо, так же хочу переделать под поддержку процессоров i9 9900k... Quote
Samsarulz Posted March 16, 2022 Posted March 16, 2022 (edited) On 6/21/2021 at 3:23 AM, dmytri2009 said: M10A 2603 BIOS version transplantation for M9A with Resizable bar support by dsanke https://www.mediafire.com/file/5dugae6mqdv0kf5 Glad I looked at this old thread and great to see more BIOS updates. Since my M9A is modded (Post #1 ones) was very easy Flash. Just rename as "creative.rom" and use USB with BIOS FlashBack. Seems the "key" is using a 4GB (or less) USB 2.0. Fun Fact was that 2301 dsanke modded BIOS did not work with a 9100F but 2603 worked just fine haha Regards Edited March 18, 2022 by Samsarulz 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.