SparkysAdventure Posted May 23, 2020 Posted May 23, 2020 Credit to @Hicookie Here We Are! Z490 XOC BIOS For Overclockers Z490 AORUS ELITE https://drive.google.com/file/d/1_sqiLvwXyjeggARBG0L879P7pOcrn_GD/view?usp=sharing Z490 AORUS ELITE AChttps://drive.google.com/open?id=1XwdYZkIUtukyujZdxV02sKdlY5_CXtsc Z490 AORUS MASTERhttps://drive.google.com/open?id=1kCDUbsxuSxNd5xgVyeKPvIsjF3hgQRlS Z490 AORUS PRO AXhttps://drive.google.com/open?id=1zPgV5O0mcGOVI5oOpuz42K9aNH78S7tS Z490 AORUS EXTREMEhttps://drive.google.com/open?id=1_4BzQlB9vC8pr5n20YuumT_VMIbQAnOW Z490 AORUS EXTREME WFhttps://drive.google.com/file/d/1xe-coZLUuIJ2RC_rysoeh4VIxgdL0ETr/view?usp=sharing Z490I AORUS ULTRAhttps://drive.google.com/file/d/13kx_EsRg3eY1Oz-gR_TkAvW_cq05pJsT/view?usp=sharing 11 1 Quote
Wizerty Posted May 23, 2020 Posted May 23, 2020 OC Tool https://drive.google.com/file/d/1iTJVFTb595ve4Z4H31nlPP3JkKlY-CHD/view?fbclid=IwAR27B8_SWEe1MMUEYR75hg6cPGDKPC7lyp8gFxFQPSq5a7dq_RNhpXRrvRE Backup link : https://drive.google.com/file/d/1uh02YQRNpw7-vlgWtJE4-8I_jSE6olfp/view 2 2 Quote
kicsipapucs Posted May 28, 2020 Posted May 28, 2020 Thanks guys for the topic and the links, keep it updated with new bios and tools! 1 Quote
Falkentyne Posted May 28, 2020 Posted May 28, 2020 On 5/22/2020 at 7:16 PM, Sparky's__Adventure said: Credit to @Hicookie Here We Are! Z490 XOC BIOS For Overclockers Z490 AORUS ELITE https://drive.google.com/file/d/1_sqiLvwXyjeggARBG0L879P7pOcrn_GD/view?usp=sharing Z490 AORUS ELITE AChttps://drive.google.com/open?id=1XwdYZkIUtukyujZdxV02sKdlY5_CXtsc Z490 AORUS MASTERhttps://drive.google.com/open?id=1kCDUbsxuSxNd5xgVyeKPvIsjF3hgQRlS Z490 AORUS PRO AXhttps://drive.google.com/open?id=1zPgV5O0mcGOVI5oOpuz42K9aNH78S7tS Z490 AORUS EXTREMEhttps://drive.google.com/open?id=1_4BzQlB9vC8pr5n20YuumT_VMIbQAnOW Z490 AORUS EXTREME WFhttps://drive.google.com/file/d/1xe-coZLUuIJ2RC_rysoeh4VIxgdL0ETr/view?usp=sharing Z490I AORUS ULTRAhttps://drive.google.com/file/d/13kx_EsRg3eY1Oz-gR_TkAvW_cq05pJsT/view?usp=sharing On 5/22/2020 at 11:22 PM, Wizerty said: OC Tool https://drive.google.com/file/d/1iTJVFTb595ve4Z4H31nlPP3JkKlY-CHD/view?fbclid=IwAR27B8_SWEe1MMUEYR75hg6cPGDKPC7lyp8gFxFQPSq5a7dq_RNhpXRrvRE Backup link : https://drive.google.com/file/d/1uh02YQRNpw7-vlgWtJE4-8I_jSE6olfp/view Hi, I have a request for you guys, the Bios team, and Hicookie. It is rather important! Right now, access to the Intersil VR ISL69269 doesn't have read access. Martin (HWinfo64) looked at the debug dump and could not find an accessible VRM. If this VRM is accessible, accurate voltage, current and power monitoring through VR VOUT, IOUT, and POUT can be added into HWinfo (and also into System Information Viewer, "SIV", the third party program), just like in Gigabyte's Z390 boards. Can you guys make a BIOS update for the Aorus Master, Extreme, and other 69269 boards, so we can get proper, accurate power monitoring by unlocking read access to the VRM? The competitors (Asus, MSI) have access to "Die-sense" voltage readouts via their Bios, so it would really awesome if you guys could re-enable access to the VRM. Thank you! (I'm using both a Z490 Master and M12E) 3 Quote
SparkysAdventure Posted May 29, 2020 Author Posted May 29, 2020 @Falkentyneas much as I wish it was the case, I am not a Gigabyte internal tester Quote
SparkysAdventure Posted May 29, 2020 Author Posted May 29, 2020 GIGABYTE Z490 X3 BIOS Release! 1. Add 1T/3T Time Support 2. Fixed DDR Training Voltage 3. Add Advanced Voltage Offset for Adaptive Vcore 4. add PS/2 Support*(not open to enduser) GIGABYTE Tweak Launcher 0527https://drive.google.com/file/d/1VxxbKgX0MZ0KZPQe5lamx-2aNAgnDfPq/view?usp=sharing Z490 AORUS EXTREME WATERFORCEhttps://drive.google.com/file/d/1F96s8R5rz5QUf1Qjrszrk1_MugwZH8rM/view?usp=sharing Z490 AORUS EXTREMEhttps://drive.google.com/file/d/1sBGpK5hdwNDEGomIqsFVznUeVQ7I55LO/view?usp=sharing Z490 AOROUS MASTERhttps://drive.google.com/file/d/16tW_EG8pOvrHK8MnuvBARLE5PoZUgBiv/view?usp=sharing Z490 AORUS ULLTRAhttps://drive.google.com/file/d/1hyHEqH-benBwF9asHtt-KurNwFEGOE5J/view?usp=sharing Z490 AORUS PRO AXhttps://drive.google.com/file/d/1PuEu07un5qMAVDoIt5YaKEdYFzD4gKh9/view?usp=sharing Z490 AORUS ELITE AChttps://drive.google.com/file/d/1Hvc57nG4Kfi9S0jrEkSVXUvJ6aVg5AN8/view?usp=sharing Z490 AORUS ELITEhttps://drive.google.com/file/d/16OfZSibsTN69WibLjyD4EHE6cpFQF2Z7/view?usp=sharing Z490I AORUS ULTRAhttps://drive.google.com/file/d/1CvKGT1EhQEkaPVHwwVXkwBN99jKPZlX8/view?usp=sharing 1 2 Quote
DStealth Posted June 10, 2020 Posted June 10, 2020 Not a bad mem OC for 4 dimm-er with X3 BIOS and almost the cheapest z490 board ? Grats Hicoockie ? 1 Quote
SparkysAdventure Posted June 10, 2020 Author Posted June 10, 2020 (edited) @DStealth Do you know how recently your memory was made, if your memory uses A0 or A2 pcb, and what you have maximum memory set at? Edited June 10, 2020 by Sparky's__Adventure Quote
DStealth Posted June 10, 2020 Posted June 10, 2020 (edited) It's A2 pcb. 4600 with these and tight subs is not booting. It's @1.8v tried up to 1.9v and close to 1.4 VCCIO/SA and it cannot go higher...but non the less it's impressive comparing it to regular 370/90 boards. Edit: This was the highest frequency with lose cl16 4750... 4800 can boot but not entering Windows even freezing in Bios. Let's hope the new upcoming Bios will get some more Oc to them Edited June 10, 2020 by DStealth Quote
Achill3uS Posted June 11, 2020 Posted June 11, 2020 credit goes to HiCookie, shared via fb page GIGABYTE AORUS Z490 XOC BIOS update X4 1. Add Favored Core feature 2. Improve Memory OC, especailly DDR4-4800C14 3. Improve dGPU detect when enabled XMP Z490 AORUS EXTREME WF https://drive.google.com/file/d/1ltUEiu82gQI5D8YXnxsxeo8RBakWqSWl/view?usp=sharing Z490 AORUS EXTREME https://drive.google.com/file/d/1rQNL6SwY8Lq_nZFHFwhNT-kKft1yv_u-/view?usp=sharing Z490 AORUS MASTER https://drive.google.com/file/d/1clt-JDWW7tuQ6l3yzNybRdQC8HyC3wKC/view?usp=sharing Z490 AORUS ULTRA https://drive.google.com/file/d/1AHmf8WVbyME08my5UNUP3VhFEds-7ypv/view?usp=sharing Z490I AORUS ULTRA https://drive.google.com/file/d/1K6gI4gAx1pCOCyyotPSFQi3y92XM92qs/view?usp=sharing Z490 AORUS PRO AX https://drive.google.com/file/d/1UoDMQMurVMw6RtiWLTE4OKKxtv48aTZ4/view?usp=sharing Z490 AORUS ELITE AC https://drive.google.com/file/d/1QmKLEcBVeS4pjebgKPHgHn5cVjT1d7Wv/view?usp=sharing Z490 AORUS ELITE https://drive.google.com/file/d/1v7lTODSrStxPcb0DDYmU40Qp0Dj70MBf/view?usp=sharing 1 1 Quote
Achill3uS Posted June 12, 2020 Posted June 12, 2020 (edited) credit goes to HiCookie, shared via fb page GTL Rev. 0622 for GIGABYTE Z490 is out, fixed some VccSA reporting incorrect values. #GIGABYTE#Z490 DRIVE.GOOGLE.COM https://drive.google.com/file/d/1bWZky6nXf8jMM9-2bFgVawEtl3DwyWbt/view?fbclid=IwAR1PMo2EjO1QSWZwI36vuFzLyDgLBbPpxar4dJwvrDavAb2zXhUXujcz2sM Edited June 12, 2020 by Achill3uS Quote
DStealth Posted June 13, 2020 Posted June 13, 2020 GTL 0612.2 update, fixed Pro AX's VccSA Reporting https://drive.google.com/file/d/1R_RoMJ0EnKWXxhuOYcQz0zBO9tBVH-FQ/view?fbclid=IwAR2AVtuMFPZ8oK74iZt8LgoWsZtYWnmEtxGPZ8YXNqGve7Et5jy35wG2q1M On 6/10/2020 at 8:13 AM, DStealth said: This was the highest frequency with lose cl16 4750... 4800 can boot but not entering Windows even freezing in Bios. With x4 this issue is gone 4835Mhz c15 1 Quote
sergmann Posted June 13, 2020 Posted June 13, 2020 8 hours ago, DStealth said: GTL 0612.2 update, fixed Pro AX's VccSA Reporting https://drive.google.com/file/d/1R_RoMJ0EnKWXxhuOYcQz0zBO9tBVH-FQ/view?fbclid=IwAR2AVtuMFPZ8oK74iZt8LgoWsZtYWnmEtxGPZ8YXNqGve7Et5jy35wG2q1M With x4 this issue is gone 4835Mhz c15 Next step CL14 1 Quote
SparkysAdventure Posted June 15, 2020 Author Posted June 15, 2020 @DStealthdo you have ASRock timing config? Quote
intance Posted July 13, 2020 Posted July 13, 2020 GTL 0612.2 This programm just killed my PSU Seasonic Prime, be carefull... Quote
Crew Leeghoofd Posted July 13, 2020 Crew Posted July 13, 2020 A software tool killed your psu?? Getting too old for this... 5 Quote
3urner Posted July 22, 2020 Posted July 22, 2020 HiCookie just released the new GTL no microcode version: https://drive.google.com/file/d/1qAfjS4MnxOS8BW-FOx9f5rlupLw_9GzQ/view?fbclid=IwAR1aRUQAttNaq2cFMD0BGjf3n6xpSprGDpYPflq7fjwEAz8EkHqkNZwFDuc Quote HiCookie's manual: GTL for No microcode preview version is out! master and extreme(WF) would work, not sure the rests. This patch fixes the CPU/Uncore ratios and throttling issues for overclockers using our Z490 no code bios 1. must use Vcore fix mode (PWM to CPU) ( or Vcore mode: auto with voltage = fixed mode ) 2. Boot in the OS, open GTL and click the "patch" 3. each time you want to reboot OS, click "restore" in case hang at restarting. 4. This patch isn't for "removing microcode from current bios", it's for fixing ratios and power with nocode bios. You can open CPUz then click " patch" and " restore" back and forth, and see frequencies changing on CPUz. end quote. 2 1 Quote
sabishiihito Posted July 28, 2020 Posted July 28, 2020 Still no sign of the no-microcode BIOSes Quote
Falkentyne Posted August 9, 2020 Posted August 9, 2020 Anyone have the X5 bios for the Z490 Aorus Master? Quote
Falkentyne Posted August 9, 2020 Posted August 9, 2020 (edited) X5 Bios is supposed to fix the problem with dual rank and 1T command rate (right now 1T completely fails to work even at stock XMP settings) 3200 CL14-32GTZR Gskill (2x16 GB) + 1T = boot loop. Edited August 9, 2020 by Falkentyne Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.