B550 Unify-X Bios and Tools

[SaskOCGuy]

You know that's really kind of sad.

[SparkysAdventure]

On 3/16/2021 at 9:04 PM, Sparky's__Adventure said:

https://drive.google.com/file/d/1K3JPyAe-3ki2rUTTvCo-38b-BgNMZC8b/view?usp=sharing

My bench OS as used here is now available to download, should be about on par with the top LN2 OCers efficiency wise. Get to benching.

Geek 3 OS no longer up because newer W10 versions are out. SP32M OS can still be found here:

https://drive.google.com/file/d/1jKnW8-VVRuecHGwMzArvYLJKoKTzc1QZ/view?usp=sharing

May end up taking down and reuploading if I make any more improvements to it.

Edited June 27, 2021 by Sparky's__Adventure

[Chaton22]

hi would like to understand,
I have a Hero X570 and a unify x
the fclk on the hero I do not exceed 1933 2 t while on Unify x more than 2000 1 t for the same configuration.

[SaskOCGuy]

So there may or may not be another XOC bios for the Unify-X coming...

Oooo... USB and PCIe fixed XOC bios things! Here's hoping...

[shar00750]

Hi, is there any xoc bios for x570 unify ? Sparky's__Adventure

[shar00750]

Just now, shar00750 said:

Hi, is there any xoc bios for x570 unify ? Sparky's__Adventure

 

[SparkysAdventure]

think this is in-os OC software

https://drive.google.com/file/d/1PL3JEGwQn1-AvrlnDzIweXviqtzMAZtU/view

[cbjaust]

On 7/26/2021 at 9:36 AM, Sparky's__Adventure said:

think this is in-os OC software

https://drive.google.com/file/d/1PL3JEGwQn1-AvrlnDzIweXviqtzMAZtU/view

I get a mainboard not supported message with the linked software and a B550 Unify-X

[SparkysAdventure]

Let me look for another link

[cbjaust]

Nevermind, ignore my post; I was trying the utility out on a C6H, my mistake. ?

On 7/27/2021 at 9:07 PM, cbjaust said:

I get a mainboard not supported message with the linked software and a B550 Unify-X

 

21 hours ago, Sparky's__Adventure said:

Let me look for another link

[I.nfraR.ed]

The bad thing about this tools is that it's x64 only. The only app that works on 32bit Windows I know of is ZenStates, but it has limited functionality and requires vcore in "AMD Overclocking" mode, not fixed. That's if you want to change VID. You can always set frequency.

[randyenergy]

[shar00750]

Hola amigos?️ I'm with the x570 unify and 5300g . I'm trying to do oc with software (command center/ryzen master/zenstates) but they are not working.

Command center open but change just the voltage. Ryzen master didn't open at all (cpu not support error). zenstates not open at all.

Is there any oc software that can work with that cpu for that board?

 

Edited August 3, 2021 by shar00750

[randyenergy]

6 hours ago, shar00750 said:

Hola amigos?️ I'm with the x570 unify and 5300g . I'm trying to do oc with software (command center/ryzen master/zenstates) but they are not working.

Command center open but change just the voltage. Ryzen master didn't open at all (cpu not support error). zenstates not open at all.

Is there any oc software that can work with that cpu for that board?

 

What GPU (dedicated) have you attached to the mobo? And I know the 5300g has an igpu.

And funny thing, look at at my picture on the previous post...it does not show the cpu voltage that I am using.

Edited August 3, 2021 by randyenergy

[shar00750]

8 minutes ago, randyenergy said:

What GPU (dedicated) have you attached to the mobo? And I know the 5300g has an igpu.

And funny thing, look at at my picture on the previous post...it does not show the cpu voltage that I am using.

I'm using gtx 1030  . If i put my 5600x on that board all oc software work good.

For me the software show the voltage and change it but don't change the frequency.

[Dziarson]

Hello have enyone A.21 bios for unify-x ?

[gkmltd]

On 12/27/2020 at 6:57 AM, Sparky's__Adventure said:

https://mega.nz/file/hok20awB#CJYyVvTeJNXPTRiKKVENeH-yEWz3VZM4nSEY7Ku1EiA

Stripped 2009-based OS for both AMD and Intel benching.

Link not working

Can put ather one please?

Tnx

[Chaton22]

Hi,
In the bios 7D13vA44 last one on PCI-E it stops at GEN 3 ? How can I get in cpu-z mainboard tab, 
current link speed 16gt instead of 2,5 gt?
My WD Black SN 850 is a gen 4 M2-1 and my graphics card is a 5700X TPCI-E1 The last firmware is present for the ssd.
I don't have this problem with the X570 Hero.
Thanks

Edited November 14, 2021 by Chaton22

[Dziarson]

First time  10K points on mem GB3

 

Edited November 19, 2021 by Dziarson

[mirco69]

Did anyone try Zen1 or Zen+ on the board yet? I just found out that at least some B550 boards are able to run older chips on pre-Zen3 bioses

[I.nfraR.ed]

They boot, but don't know how good they work. Unify-X still supports them in the latest official bios on the site.

No official support announced on the site, but the modules are clearly there and I've tested 1800X and 1600AF on some of the older bioses.

IIRC there were some options missing and the support is basic.

Edited December 5, 2021 by I.nfraR.ed

[unifyx]

Hi guys...
Has somebode a unlocked version of the new BIOS A40 to share?

Would be nice, if you can share a collection of all/most of the unlocked BIOSes to test, wich one works best and most stable on the unify-x

thanks in advance 

[Broken APEX49]

Can I overclock the 5800x3d?

[SparkysAdventure]

Unsure, try BCLK

[Broken APEX49]

I would like information on boards that can reliably OC the CPU.