June 27, 20213 yr Author On 3/16/2021 at 9:04 PM, Sparky's__Adventure said: https://drive.google.com/file/d/1K3JPyAe-3ki2rUTTvCo-38b-BgNMZC8b/view?usp=sharing My bench OS as used here is now available to download, should be about on par with the top LN2 OCers efficiency wise. Get to benching. Geek 3 OS no longer up because newer W10 versions are out. SP32M OS can still be found here: https://drive.google.com/file/d/1jKnW8-VVRuecHGwMzArvYLJKoKTzc1QZ/view?usp=sharing May end up taking down and reuploading if I make any more improvements to it. Edited June 27, 20213 yr by Sparky's__Adventure
July 4, 20213 yr hi would like to understand, I have a Hero X570 and a unify x the fclk on the hero I do not exceed 1933 2 t while on Unify x more than 2000 1 t for the same configuration.
July 14, 20213 yr So there may or may not be another XOC bios for the Unify-X coming... Oooo... USB and PCIe fixed XOC bios things! Here's hoping...
July 24, 20213 yr Just now, shar00750 said: Hi, is there any xoc bios for x570 unify ? Sparky's__Adventure
July 25, 20213 yr Author think this is in-os OC software https://drive.google.com/file/d/1PL3JEGwQn1-AvrlnDzIweXviqtzMAZtU/view
July 27, 20213 yr On 7/26/2021 at 9:36 AM, Sparky's__Adventure said: think this is in-os OC software https://drive.google.com/file/d/1PL3JEGwQn1-AvrlnDzIweXviqtzMAZtU/view I get a mainboard not supported message with the linked software and a B550 Unify-X
July 28, 20213 yr Nevermind, ignore my post; I was trying the utility out on a C6H, my mistake. ? On 7/27/2021 at 9:07 PM, cbjaust said: I get a mainboard not supported message with the linked software and a B550 Unify-X 21 hours ago, Sparky's__Adventure said: Let me look for another link
July 28, 20213 yr The bad thing about this tools is that it's x64 only. The only app that works on 32bit Windows I know of is ZenStates, but it has limited functionality and requires vcore in "AMD Overclocking" mode, not fixed. That's if you want to change VID. You can always set frequency.
August 3, 20213 yr Hola amigos?️ I'm with the x570 unify and 5300g . I'm trying to do oc with software (command center/ryzen master/zenstates) but they are not working. Command center open but change just the voltage. Ryzen master didn't open at all (cpu not support error). zenstates not open at all. Is there any oc software that can work with that cpu for that board? Edited August 3, 20213 yr by shar00750
August 3, 20213 yr 6 hours ago, shar00750 said: Hola amigos?️ I'm with the x570 unify and 5300g . I'm trying to do oc with software (command center/ryzen master/zenstates) but they are not working. Command center open but change just the voltage. Ryzen master didn't open at all (cpu not support error). zenstates not open at all. Is there any oc software that can work with that cpu for that board? What GPU (dedicated) have you attached to the mobo? And I know the 5300g has an igpu. And funny thing, look at at my picture on the previous post...it does not show the cpu voltage that I am using. Edited August 3, 20213 yr by randyenergy
August 3, 20213 yr 8 minutes ago, randyenergy said: What GPU (dedicated) have you attached to the mobo? And I know the 5300g has an igpu. And funny thing, look at at my picture on the previous post...it does not show the cpu voltage that I am using. I'm using gtx 1030 . If i put my 5600x on that board all oc software work good. For me the software show the voltage and change it but don't change the frequency.
September 14, 20213 yr On 12/27/2020 at 6:57 AM, Sparky's__Adventure said: https://mega.nz/file/hok20awB#CJYyVvTeJNXPTRiKKVENeH-yEWz3VZM4nSEY7Ku1EiA Stripped 2009-based OS for both AMD and Intel benching. Link not working Can put ather one please? Tnx
November 14, 20213 yr Hi, In the bios 7D13vA44 last one on PCI-E it stops at GEN 3 ? How can I get in cpu-z mainboard tab, current link speed 16gt instead of 2,5 gt? My WD Black SN 850 is a gen 4 M2-1 and my graphics card is a 5700X TPCI-E1 The last firmware is present for the ssd. I don't have this problem with the X570 Hero. Thanks Edited November 14, 20213 yr by Chaton22
December 4, 20213 yr Did anyone try Zen1 or Zen+ on the board yet? I just found out that at least some B550 boards are able to run older chips on pre-Zen3 bioses
December 5, 20213 yr They boot, but don't know how good they work. Unify-X still supports them in the latest official bios on the site. No official support announced on the site, but the modules are clearly there and I've tested 1800X and 1600AF on some of the older bioses. IIRC there were some options missing and the support is basic. Edited December 5, 20213 yr by I.nfraR.ed
January 5, 20223 yr Hi guys... Has somebode a unlocked version of the new BIOS A40 to share? Would be nice, if you can share a collection of all/most of the unlocked BIOSes to test, wich one works best and most stable on the unify-x thanks in advance
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.