ASRock Z590 OC Formula Thread:

[gkmltd]

Just a small Contribute to this great Mobo

If anyone want to enable the USB on XP without external PCI-E

That file Make the job done

Open Rar file and Just install it via the device manager on the XP OP

Enjoy ?

USB3forIntel.rar

[Chaton22]

Hi,
I received mine earlier this week.
Have you tried the 1.40 bios?

[sieger]

Yeah 1.40 is amazing for cml it looks like. A lot better training. Dont know what changed for rkl.

Also is there any bios with more settings unlocked? This bios is joke. At least there should be "Display Hidden OC Item" toggle. I m sure you all know what it did before.

I have contacted Asrock support and their answer was: `Regarding your question, the BIOS options you can see are all the existed options, there are no options that are hidden.` 

I mean when I look at the bios settings, it is not, there are TONS of stuff hidden, also there is the layout for display hidden oc item, just its name isnt written, so for the devs, it is not even a hard thing to do. And I never understand why these support are never helpful. I mean why do you even lie? This board is not 70 bucks entry level works as intended board.

Hopefully someone with knowledge will read and understand.

Edited August 2, 2021 by sieger

[Splave]

On 7/29/2021 at 5:07 PM, gkmltd said:

Just a small Contribute to this great Mobo

If anyone want to enable the USB on XP without external PCI-E

That file Make the job done

Open Rar file and Just install it via the device manager on the XP OP

Enjoy ?

USB3forIntel.rar 296.47 kB · 6 downloads

Epic thankyou!

[Splave]

1 hour ago, sieger said:

Yeah 1.40 is amazing for cml it looks like. A lot better training. Dont know what changed for rkl.

Also is there any bios with more settings unlocked? This bios is joke. At least there should be "Display Hidden OC Item" toggle. I m sure you all know what it did before.

I have contacted Asrock support and their answer was: `Regarding your question, the BIOS options you can see are all the existed options, there are no options that are hidden.` 

I mean when I look at the bios settings, it is not, there are TONS of stuff hidden, also there is the layout for display hidden oc item, just its name isnt written, so for the devs, it is not even a hard thing to do. And I never understand why these support are never helpful. I mean why do you even lie? This board is not 70 bucks entry level works as intended board.

Hopefully someone with knowledge will read and understand.

what options are you looking for mate?

[Leeghoofd]

Quickly tested the CML and Bios 1.40, seems far better than before

I included a few profiles with my 10900K to get you started

 

4000C16start.BIN 4600C16START.BIN 4600tight.BIN

[Brainlet]

-

Edited August 7, 2021 by Brainlet
typo

[Leeghoofd]

My 2 cents, more is not always better in my book. 99% of most users never touch AUTO settings...

Plz give a list of which features you would like to have... and stating why would also be interesting...

[sieger]

@Leeghoofd

Agreed this bios is a lot better than the other 1.2X ones for cml. I couldnt manage to get tighter yet, and training cr1 is still hard. It is already good as it is, hopefully there will be some improvements.

[Splave]

I don't understand what's missing. The ability to use a program to hack the bios to show hidden engineering settings doesn't work?

 

What settings are you looking for so that maybe we can help you out.

[sieger]

@Splave It is now ok. 

Just I wanna ask something else, you see the ram oc ive made in the previous post, now it is 4100 freq, same timings and tRFC 350. 

The problem is, iol values are 7-7 7-8 or 8-8. And gives better performance when 7-7 of course. But when I want to manually enter the values(nothing different, just the ones it sets automatically) it doesnt boot. And there arent much to change, rtls, iols, and offset. I just want to lock it to 7-7 which it sometimes already sets it automatically.

Do you guys know what can cause this, or how can i solve it.

[Splave]

try locking in the RTL and IOL at the same time if you havent already

[sieger]

5 minutes ago, Splave said:

try locking in the RTL and IOL at the same time if you havent already

ye tried that, tried one by one, then all of them at  the same time, then part by part. I dont even try any other value only its own auto value. Weird, tonight ill try jedec values to see if it changes anything.

[CornerJack]

On 4/25/2021 at 5:51 PM, websmile said:

I received the boards a few days ago and now had a couple of hours for first memory tests. Retail 11900K on aio, memory air

4400c17 at 4800c14

 

G.Skill Royal 4400C16 at 4800C14

 

G.Skill 3600C14 at 5000C14, IMC could not keep up with the load

at 5214 C15-14

at 5277 c15-14 direct boot Cinebench

 

More to follow, I still have some screens on HDD. 5333c15 posts but fails win enter, seems more of imc than memory issue

Hello, I also just received the motherboard but where the 5066 strap goes without a problem with the APEX, impossible with the OC Formula. During Geekbench 3.4.2, the benchmark crashes every time when dijsktra. Any ideas? A particular trick? Thanks a lot. 

[Mahameru]

3 hours ago, CornerJack said:

Hello, I also just received the motherboard but where the 5066 strap goes without a problem with the APEX, impossible with the OC Formula. During Geekbench 3.4.2, the benchmark crashes every time when dijsktra. Any ideas? A particular trick? Thanks a lot. 

Try to set maxmem around 2GB, looks like you forgot to set maxmem first

[websmile]

imc-volts/vdimm or trfc might also be a problem. Real voltages seem to be higher on apex than on asrock, but limits on mem oc do not differ that much. Fast test on an unknown kit from rma works easily

 

[CornerJack]

On 8/11/2021 at 11:16 AM, websmile said:

imc-volts/vdimm or trfc might also be a problem. Real voltages seem to be higher on apex than on asrock, but limits on mem oc do not differ that much. Fast test on an unknown kit from rma works easily

 

Thanks

[Chaton22]

Hi
Is the bios different depending on the processor?
I don't have NickShih oc profile
I don't have memory preset
my processor 10850K
bios 1.4
and 1.27A

Help please
thanks

Edited August 17, 2021 by Chaton22

[Mahameru]

18 hours ago, Chaton22 said:

Hi
Is the bios different depending on the processor?
I don't have NickShih oc profile
I don't have memory preset
my processor 10850K
bios 1.4
and 1.27A

Help please
thanks

Maybe.. looks like memory preset optimized only for Rocket Lake

[websmile]

On 8/17/2021 at 3:12 PM, Chaton22 said:

Hi
Is the bios different depending on the processor?
I don't have NickShih oc profile
I don't have memory preset
my processor 10850K
bios 1.4
and 1.27A

Help please
thanks

I found a setting in mem section where you can enable cometlake oc - maybe this can help, I can´t test though

[Chaton22]

Yes it is activated, I had to buy a rocket just to have the possibilities of this card

thank you

[Chaton22]

15 hours ago, websmile said:

J'ai trouvé un paramètre dans la section mem où vous pouvez activer cometlake oc - peut-être que cela peut aider, je ne peux pas tester cependant

It is curious. Even though I'm not a step up in the big leagues. It's a shame that this card and the bios work depending on the processor.I installed a 11600K just now and I have plenty of things I didn't have. I can't benchmark it.
It's a shame for a high end card.

[Broken APEX49]

I'm also using 11600KF
I haven't overclocked it yet, but does it have any less features than other CPUs?

[l0ud_sil3nc3]

Tried out latest 1.27H bios, seems same same to 1.27D which it replaced. The only weird thing I noticed on both bios is that certain dividers are missing or disappear for some reason, namely 3866 and 4133.

On 8/19/2021 at 4:41 PM, websmile said:

I found a setting in mem section where you can enable cometlake oc - maybe this can help, I can´t test though

Yup it's at the bottom, saw that but no CML to try with here atm.

 

 

[Neon Knights]

3866 Devider only appears when Gear 1  is choosen. On official Bioses 1.2 & 1.4 i mean that there is no 3866 devider , even when you have choosen Gear 1, but i have to check this by booting from BIOS A (my place for official Bioses )

Gear 1 choosen

Gear 2 choosen

 

Edited August 22, 2021 by Neon Knights