Splave Posted September 16, 2012 Posted September 16, 2012 Why pay for a solution that is obviously just user error You hurt my feelings Quote
Jimba Posted September 17, 2012 Posted September 17, 2012 Why pay for a solution that is obviously just user error splave is just broke from spending money on the moa qualifier and wants to get some money back? Quote
Massman Posted September 17, 2012 Posted September 17, 2012 88 issue has been found as well as a solution. More info later. Splave, did you have voltage issues on V1.4 final bios? Or only on V1.4b6. Oh, also: Quote
Xtreme Addict Posted September 17, 2012 Posted September 17, 2012 Hope you will only leave 5400+ lol Quote
Splave Posted September 17, 2012 Posted September 17, 2012 V1.4 was better. V1.3 is great except the control center needing a restart Quote
TaPaKaH Posted September 17, 2012 Posted September 17, 2012 28 CPUs is not that much, I thought there'll be more Quote
Splave Posted September 17, 2012 Posted September 17, 2012 new bios memory still stuck under 2400 divider b4 code, sometimes 9A tried just about everything still max 2333mhz but will run tight so I dont think its the imc... I thought it was 2t vs 1t but it isnt.......maybe its my c1 chip by chance.....? you can boot 2400 100bclk no problem? Quote
Splave Posted September 18, 2012 Posted September 18, 2012 (edited) yeah thats 2333 is at 125bclk, any thoughts on the control center problems? PSC 2400 divider = b4 Corsair hynix 2666 cas11 2400 divider = b3 kingston genesis Cold boot 2333 profile (that passes 32m) = 9A ordered a c2 3930k to rule that out shiot is getting expensive! Edited September 18, 2012 by Splave Quote
Massman Posted September 18, 2012 Posted September 18, 2012 I had the 9A too. I can run 2400, but not 101bclk. Thought it was CPU issue You under cold? Quote
matose Posted September 18, 2012 Posted September 18, 2012 New 1500 BIOS sucks balls, old one rulz... can run 1500MHz on air Quote
gnidaol Posted September 18, 2012 Posted September 18, 2012 new bios memory still stuck under 2400 divider b4 code, sometimes 9A tried just about everything still max 2333mhz but will run tight so I dont think its the imc... I thought it was 2t vs 1t but it isnt.......maybe its my c1 chip by chance.....? you can boot 2400 100bclk no problem? I can boot 2400 100 without any issues... but my chip can't handle 2500.... this is doable in any xpower given bios (1.3, 1.4b6, 1.4 and moa) Quote
Splave Posted September 18, 2012 Posted September 18, 2012 I had the 9A too. I can run 2400, but not 101bclk. Thought it was CPU issue You under cold? under water atm, will try chilled but I think its the c1 messing up (hoping) Quote
uncle fester Posted September 18, 2012 Posted September 18, 2012 new bios memory still stuck under 2400 divider b4 code, sometimes 9A tried just about everything still max 2333mhz but will run tight so I dont think its the imc... I thought it was 2t vs 1t but it isnt.......maybe its my c1 chip by chance.....? you can boot 2400 100bclk no problem? i get 2400 nps man, but one of my chips wont its just your cpu dude. Quote
Splave Posted September 18, 2012 Posted September 18, 2012 thanks fester So for me current issues are CPU must be at x45 or lower to cold boot or will get 9A -Must boot x45 or less first for the hard reset...then bump to x50 and is stable until power down. -If power is cut, will get 9A hang Control Center II on every bios chip asks for a reset to apply settings. Quote
Massman Posted September 19, 2012 Posted September 19, 2012 CC should ask it only the first time, afaik. The second time it should be no problem. Quote
Lucky_n00b Posted September 19, 2012 Posted September 19, 2012 @ Massman : Hey man, how's your testing in MSI HQ? Do you get the VGpu 1.62V Limit too? Any news of a workaround/fix? Thx Quote
Massman Posted September 19, 2012 Posted September 19, 2012 Haven't gotten around to test that. Last I heard was that R&D is trying to fix the problem with the latest bios. Quote
Splave Posted September 19, 2012 Posted September 19, 2012 I think that they should provide each contestant with the Chil tool to control voltage and be done with no problem Quote
zeneffect Posted September 19, 2012 Posted September 19, 2012 shhhhh.... not many people know about that tool. Quote
matose Posted September 19, 2012 Posted September 19, 2012 Anyone knows why I can't boot with 4 DIMMs installed? With only 2 it works fine... Quote
Lucky_n00b Posted September 19, 2012 Posted September 19, 2012 Anyone knows why I can't boot with 4 DIMMs installed? With only 2 it works fine... Do you install it in the DIMM numbered 1,3,5,7 bro? Sometimes bad contact with the modules also caused no-boot with B7 error. Quote
matose Posted September 19, 2012 Posted September 19, 2012 Yes, tried all combination... it just shuts down, the on again, 5-6 sec then shut down again, and so on Quote
Splave Posted September 19, 2012 Posted September 19, 2012 Anyone knows why I can't boot with 4 DIMMs installed? With only 2 it works fine... I get that error when trying 4gb Dimms in anything other then single channel. Is this with 4gb dimms? Quote
matose Posted September 19, 2012 Posted September 19, 2012 It's with the Kingston's 4x2GB 2400C11... the ones from the final I tried also with Dominator GTX8, the same Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.