August 2, 201311 yr Wow Vivi, one of your cpus? 5,5 GHz 32m on air is crazy nice I've had chips maxing out 32m at 5.6-5.7 on single stage lol.
August 3, 201311 yr Crew Wow Vivi, one of your cpus? 5,5 GHz 32m on air is crazy nice I've had chips maxing out 32m at 5.6-5.7 on single stage lol. one of my new ones yes! ill hhunt my suppliers monday to see if they have more of this batch. its gold supreme, already did 6.7 4c 8t but i ran out of BCLK on this crappy mpower, wil probly be 1m at 7ghz thats the dream . k404 made me feel the same way ^^
August 3, 201311 yr one of my new ones yes! ill hhunt my suppliers monday to see if they have more of this batch. its gold supreme, already did 6.7 4c 8t but i ran out of BCLK on this crappy mpower, wil probly be 1m at 7ghz thats the dream . k404 made me feel the same way ^^ Don't kill it, change mobo quick
August 3, 201311 yr i got this.................... my eyes exploded NEW BEST BATCH same as 3251b562 costa rica 1.13v 5ghz air 32m 1.464v 5.5ghz air 32m bad times are due to broken single channel mpower aww man now that is a cpu !
August 5, 201311 yr Crew another 3251B562 going to Drweez, this was the last one from the supplier. will phone tomorrow to see if other suppliers have.
August 13, 201311 yr L236B982 - 5GHz 1.304v 32M ^ Sold and got: 3251B562 - 5GHz 1.304v 32M Not the best of luck, but at least its not worse
August 21, 201311 yr 1.3 volt for 32m is a good cpu. I agree, my first cpu couldn't even do 5GHz no matter what voltage, and only managed 5.3GHz under dice for 3dmark06. But 1.3v looks noob if you compare it against the 1.13v and 1.2v ones Vivi found, he's just so lucky with cpu's lol! We will hopefully test these cpu's under ln2 within next few weeks...
August 24, 201311 yr So I ran this 3251B562 chip under LN2... http://valid.canardpc.com/2895728 Please note that this was my first time ever I used LN2 lol! Used bad thermal paste, and also frequency wouldn't scale with lower temps, then I saw the pot was slightly unmounted to one side, had further trouble with GPU when trying to run AM3. Only had 3 liters LN2 so couldn't do much... Will give it another go next week and do some 3D with it.
August 25, 201311 yr So I ran this 3251B562 chip under LN2... http://valid.canardpc.com/2895728 Please note that this was my first time ever I used LN2 lol! Used bad thermal paste, and also frequency wouldn't scale with lower temps, then I saw the pot was slightly unmounted to one side, had further trouble with GPU when trying to run AM3. Only had 3 liters LN2 so couldn't do much... Will give it another go next week and do some 3D with it. this is not so good compared to the air results of this batch. take care of your mount and chip and try again. lower temps ? what temps were you at? at 105+ bclk you should go for full pot
August 26, 201311 yr this is not so good compared to the air results of this batch.take care of your mount and chip and try again. lower temps ? what temps were you at? at 105+ bclk you should go for full pot I agree, not very good compared to the air testing, I expected at least 6.6GHz My temps were at about -160 degrees, will certainly try again next time when I have more than 3 Liters of LN2 lol! I still have a lot to learn, so thanx for the help
August 26, 201311 yr I agree, not very good compared to the air testing, I expected at least 6.6GHz My temps were at about -160 degrees, will certainly try again next time when I have more than 3 Liters of LN2 lol! I still have a lot to learn, so thanx for the help no problem it is good for begining. my first ln2 benching was weak too, board froze in 15 mins lol. I see you at least not pumped 2v in that cpu for the first time which is good. It seems you have the skill to feel when to stop. It is good. Next time, make a proper contact with the cpu ( cross tighten the screews of your pot, hard enough that you cant twist the pot with force ) use a good thermal paste, pull down to -190°C on the pot then you can go for 6600mhz im sure.
August 27, 201311 yr Crew Anybody tryed a 3218D Batch ? all those batches from 3218 were amazing, if you find low V chip you should be in business
September 23, 201311 yr Got another CPU - Batch L248C112 Didn't try 2c/2t but should be close to the other two I posted. Also switched to Gigabyte Z77X-UD3H from Asus M5F after few dead CPU's after only very short cold sessions. As soon as I tested the frequency of the CPU's they died before I were able to run benchmarks. If this continues to happen with this mobo also I'll just get Haswell
September 27, 201311 yr Crew L215b 3570k it's good for ln2? no idea man if it does low v 5ghz it could be good
October 15, 201311 yr i have got a 3230c, it need 1,43v for spi32m stable with 4c/4t ! there is some chance under cold? not good! i can't increase voltage over 1,75v under ln2! Edited October 17, 201311 yr by barbonenet
December 17, 201311 yr 3770K, batch 3233C587 from Micro Center in Duluth, GA. IMC hard cap above DDR3-2666. Haven't tested CPU clocks/volt yet.
December 18, 201311 yr 3570K L212B204 Daily 4,5 ghz with 1,15V 5 Ghz 3D with 1,33V 4,8 Ghz with 1,22V Validation 6 ghz on DICE cooling: http://valid.canardpc.com/mzhqvy IMC caped at around 2990 mhz
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.