September 28, 201311 yr L310B490 5 ghz 32m stabel 1.25 (air). on ln2 6.4 with 1.7 vcore (ln2) cb 130 cbb 125
September 28, 201311 yr L310B490 5 ghz 32m stabel 1.25 (air).on ln2 6.4 with 1.7 vcore (ln2) cb 130 cbb 125 Did you try to set higher Vcore?
September 28, 201311 yr 4670KL313B428 5 GHz 32m 1,250 Volt on air. Will test today on LN2 Jackpot 6,3 GHz 06 CPU test stable. Will test more tomorrow.
September 29, 201311 yr L310B490 5 ghz 32m stabel 1.25 (air).on ln2 6.4 with 1.7 vcore (ln2) cb 130 cbb 125 Hi man.. We continue to have the same batch cpu ahahahah...Your 3770K was 3218B976 and now your 4770K is L310B490 as mine... I have tested it at 1.7V and is stable to 6.1 ghz. What are your settings ? Thanks...
September 30, 201311 yr Tested another batch. L311B495 4770K 4.9GHz @ 1.4v Superpi 1M. 5GHz failed halfway.
October 3, 201311 yr Firstly awesome thread and thanks to everyone that is sharing/testing these batches out. I just picked up a 2nd 4770k today for a dedicated bench rig so i don't keep using risking my main PC. Based on the first post it should be good, although it isn't a guarrantee of course. L312B515 (4.6Ghz 1.19v 32m stable, 5.0Ghz 1.385v 32M stable)L312B515 (5Ghz @1.35V spi32m 2c, ln2 valid 6374Mhz @1.785V.. CB -130) L312B515 (6,8 ghz max on ln2) good
October 3, 201311 yr Crew got 2x 3314B783 COSTA RICA my first go at costas, dont let me down baby! ooh sskmercer goodluck!
October 3, 201311 yr got 2x 3314B783 COSTA RICA my first go at costas, dont let me down baby! ooh sskmercer goodluck! Thanks vivi. STill very new at this, but really enjoying the learning curve.
October 3, 201311 yr got 2x 3314B783 COSTA RICA my first go at costas, dont let me down baby! ooh sskmercer goodluck! CostaRica FTW )) Btw, What country is produce Intel Haswell cpus except Malay and CR? Edited October 3, 201311 yr by MaJ0r
October 3, 201311 yr Got an L315B407 today, 5ghz is 1.38v. I guess I'll try on LN2 since it's my best 4770k so far. CB -122
October 4, 201311 yr Just picked up a 4670k, exchanged my Corsair h110 as i thought i would go proper WC setup on my little bench/test rig I have made. The batch number is L312B356 which isn't listed in the first post, so i thought i would mention that i got one. i won't be testing it till next week though. Is there anything (besides LN2/extreme stuff) that you guys would like to see me try with it?
October 4, 201311 yr CB -122 What is the max freq for 3D(2D)? I got cpu that can do 32m with the same voltage.
October 5, 201311 yr Just picked up a 4670k, exchanged my Corsair h110 as i thought i would go proper WC setup on my little bench/test rig I have made. The batch number is L312B356 which isn't listed in the first post, so i thought i would mention that i got one. i won't be testing it till next week though. Is there anything (besides LN2/extreme stuff) that you guys would like to see me try with it? Hey man,just see what your chips can do on Pi 32M 5ghz 4 cores HT enabled,don't bother about what uncore can do.Just see if they can do 32M 5ghz and @ what volts,water or air If your chip can do 5Ghz 32M @ 1.2-- volts you should have a nice scaling chip PS always keep a eye on temps and volts being used on air too,no need to kill chip Edited October 5, 201311 yr by Bullant
October 5, 201311 yr Hey man,just see what your chips can do on Pi 32M 5ghz 4 cores HT enabled,don't bother about what uncore can do.Just see if they can do 32M 5ghz and @ what volts,water or air If your chip can do 5Ghz 32M @ 1.2-- volts you should have a nice scaling chip PS always keep a eye on temps and volts being used on air too,no need to kill chip Thanks buddy. Only have the stock HSF's ATM (till i get some water) but if it runs @1.2v it should be safe but will have core temp running just to be safe. Will give it a run monday night to see how it fares, wish me (the chip) luck.
October 5, 201311 yr Got a L318B353 from the store for my new setup, looking forward to test it (on air only) next weekend when I get the motherboard I need. Edited October 5, 201311 yr by backeby
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.