General hardware discussion

Until we find the time necessary to build a new hardware database overview, here's the list. Links: - Processor database list (last update 22/09/2011): http://hwbot.org/news/6192_hwbot_database_cpu_list - Videocard database list (last update 22/09/2011): http://hwbot.org/news/6197_hwbot_database_videocard_list CPU SELECT "<tr><td>",manufacturer.name,"</td><td>", cpu_family.name,"</td><td>",cpu_subfamily.name,"</td><td>",cpu_core.name,"</td><td><a href='http://hwbot.org/hardware/processor/",cpu_model.safe_name,"/' target='_blank'>", cpu_model.model,"</a></td></tr>" FROM cpu_…

For your information a break-down of the different product lines of motherboard companies. Some are a bit less clear than others, so I hope this list might help you get some clarity. ASRock Extreme series (feature rich normal users) Fatal1ty series (gaming)Champion Performance = budget Professional = feature-rich [*]Icafe series [*]OC Formula series (overclocking) [*]Pro series (budget users) ASUS Mainstream series (normal users) ROG series (gaming, overclocking)Primary denominatorRampage = high-end Intel chipset series Maximus = mainstream Intel chipset series Crosshair = AMD series [*]Secondary denominator ROG uses roman number scheme to …

Over the last few years, the board has been on LN2 about a dozen times and every 2-3 sessions it would arrive in a state where it would shut down and no longer react to the power button. The only way to get it back to work was putting it in a 120c oven for 10 minutes or so. However, after its most recent breakdown + ovening it now exhibits the following behavior: - With Seasonic Titanium 1000W: no reacton to power button at all - With Corsair AX1500i: it powers up, but shuts down before it completes POST - With Silverstone OP1000: it powers up and works perfectly fine. But, if I set the Vmch to any value other than [Auto] in the BIOS, the board shuts down d…

I was trying to run RX 9070 XT on LGA 2011-3 but no luck so far The systems seem to boot but there is no image displayed all the time. I forced PCI Express setting in BIOS - no matter if Auto or Gen3 or Gen 2 or Gen 1 - doesn't help. Tried disabling Resizable BAR - no effect. Used either DisplayPort or HDMI - doesn't seem to matter. When I switch back to RX 6800 XT everything runs like a charm. Any ideas appreciated! Gear: Sapphire RX 9070 XT PURE Gigabyte X99-SOC Force with F23c BIOS (newest) modded for Resizable BAR support Enermax Platimax 1000 W

d'un i7-13400KF au i9-14900KS je me bat contre mes propres processeur. c'est genant..

This is another 775 mobo I get for the sole purpose of fun and pushing the AGP limit(s) with some serious CPU's. The mobo does support not only AGP, but also PCIe and not only DDR(1) rams, but DDR2 as well: http://hwbot.org/hardware/motherboard/775dual_vsta/ So, it is a remarkable piece of hardware Also after updating the bios to latest official P3.10 version ( http://www.asrock.com/mb/VIA/775Dual-VSTA/ ), there are plenty of bios options to play. More that I imagined: And that is not all! There are existing modified bioses ( http://pctreiber.net/asrock-bios-downloads?did=103 ) that since v3.10a give the possibility to boost the max…

I love It!

Based on a 423 Socket. Original pcb named as P4VXAS. Add a photo: https://theretroweb.com/motherboard/image/f-62eae6823528e225350027.jpeg

Just for the record, the 166 Mhz one was also available as official released product: https://www.cpu-world.com/CPUs/MP6/Rise%20Technology-MP6%20166%20MHz%20-%20MP6441RPFE4-Q.html

This board isn`t E210882, it is D850GB https://theretroweb.com/motherboard/image/20200711-185701-5f09e362784c6261558478.jpg

Funny board. I made a bios mod with nvme driver, different variants of microcode and right brand and model name. HWBOT does not auto detect this board via BM submissions. May be ti should be "Esonic", but not "ESONIC". I can share my bios mod, but it is really trivial.

6 years old, 1000's of hours gaming and it still OC's as good as when new even without a delid.

Hi! Bought this motherboard off marketplace with i7 930 and i7 950 . All went OK when installing XP`s and I made the changes from luumi`s video on yt. When I installed CPU-Z 2.09 the thing doesn`t open! Its stuck at loading at 12-15% ... If in .ini I put PCI to 0 it opens, but its missing some specs. Is this ok for validations? The same is with 2.08 . I tried different rams, tried both cpu`s, the bios was not the latest I updated and still the same. I didn`t try different OS that is my next thing to do. Maybe some hardware problem, the board is old and who knows where it was for the last couple of years …

That is a fun CPU

may be a wrong picture

Hey everybody, I hope this is the right subforum to ask? If not please move it accordingly. So... after being on a 2500k @ 5.2GHz for almost 13 years now, I feel it's time for something new. Since I don't change my system like every year or so (obviously :D), I'm eyeing the AM5 platform to be my best bet on possible future upgrades if AMD is going to keep its promise to release a few more cpus for this socket in the next few years. Basically right now I'm a bit in trouble with finding the right mainboard and I hope you guys can help. I'm planning on buying an "E" chipset board, so that I have PCIe5 should I need it in the future and a 7800X3D is supposed to be…

Super cheap 7700K beater.

the power supply does not work if it is not connected to the motherboard?I wanted to use the second power supply for VGA, is there a way to make it work? Thank you very much and sorry for my ignorance on the subject

Basically there are PCIe GPUs available from China that use chips originally destined for laptops, which were originally made for miners due to their excellent efficiency but can now be picked up quite cheap due to their drawbacks for home use. Many types are available (3060 6/12G, 3070, 3070Ti, 3080 and even some older 20 series). I happened to get a 3070M dirt cheap from an ex miner recently. This is a somewhat similar case as this post about chinese bga-lga laptop CPUs though a bit different given that this is identical to retail silicon. The cooling is obviously far superior to that of a laptop but there are other limitations. There is no support for ReBa…

List of CPUs allowed for this category: Pentium Gold G5500 Pentium Gold G5500T Pentium Gold G5600 Core i3-8100T Core i3-8100 Core i3-8300T Core i3-8300 Core i3-8350K In GPU-Z: Device ID 8086 3E91

I recently stumbled upon a sale add about a GALAX Z690 DDR4 motherboard. https://www.ebay.com/itm/374614215744 Never heard about a GALAX motherboard before , so i was curious about it. Tried to do a little search but came up with almost nothing. Does GALAX really made this board or is it actually a re-brand ? Cant find a product page either. https://www.galax.com/en/motherboard/mb-intel.html Anyone ever used one ? Any input is welcome

review launch 20.11.2023: https://www.guru3d.com/review/amd-ryzen-threadripper-7980x-review/ https://www.anandtech.com/show/21124/amd-ryzen-threadripper-7980x-and-7970x-review

Change the chipset on KM266 (VT8375)

Change the chipset on KM266 (VT8375)

Are there may be KM400 (VT8378)?