SparkysAdventure

Where did this go?

Looks like a pretty sick fullpot container for low core count chips or even direct die conversion. Have you used it before?

How many revisions of the Tsai pot were made?

I may be able to help with Macrium, do you have a Macrium backup of XP?

@Bullant Finally found Z97X-SOC Force LN2 to use for benching, do you think you could help me out with setup/OS?

Hello, are 1 and 3 still available?

Also, item 1 still available?

Wow, set 1 is actually quite strong as far as Hynix goes. Both tCL and tRCD. Set 8 looks pretty amazing as well, have you tested tRCD 13 limit? I've seen one set before break 5200, one of dumo's, but not many tested.

My man, great work!

I gotcha, do you still have that set of BBSE that did like 2750 8-11-7 air?

Unfortunate last loop, still solid run for sure!

This is a Gigabyte-Rocket Lake specific problem to my knowledge. You are not the first I've heard report this.

Awesome work!

What are you using for cooling the memory? LN2? Also, what does this set of memory do on air with Haswell?

JEDEC bins Voltage: C__ is 1.5v Y__ is 1.35v Speed: _F8 is 1066 7-7-7 _H9 is 1333 9-9-9 _K0 is 1600 11-11-11 _MA is 1866 13-13-13 I know these all exist in the dual rank, ecc unbuffered udimms, and should also exist in other formats. There may exist an 800 "F7" or 2133 "NB" variant, but I have not seen any documentation of either.

@seranidyWant to make bioses like this for Z590?

Do you have any pictures of the PCB your 2x16 uses?

There's absolutely gas left in the tank in terms of cache. With similar (hell maybe higher) ambient temp, I got 5g ring with 1.7vcore running using a Scythe Fuma 2 for cooling: I'd like to note that 1.7vcore was absolutely unnecessary. I know I got it to pass at 1.63v, and I think it probably could've passed even at 1.55v. You are absolutely right about too tight having performance loss. I noticed with one of my old sets, too tight tRFC would tank scores. All my tertiaries are tested for consistent performance gain with this specific kit and board. I know not all motherboards like the same settings, buddy with an OCF and Tachyon said both didn't run well with my timings. I really need to try newer bios, hopefully manual RTL will work, should be a couple hundred ms still available. Do you think your Raptor was slowing you down? I've always benched on SSDs, as that's just what I've had available to me. Also, 3c3t should have meaningfully lower idle temp, so if 4c4t isn't faster for you, then you'll see other benefits. If you need different dual rank, I have one more spare set that I need to get rid of. Phone repair bills are a pain, especially in college

Taking a look at your most recent result: https://hwbot.org/submission/4805185 How come you used 3 cores enabled here instead of 4? I found cores 4 and 5 to be the "most efficient". Also, have you tried much lower tRAS, like 14? Or tightening other settings (like tRFC or maybe even trying some atypical tertiaries) for shaving off maybe a couple dozen ms. I assume you already have tight AF RTLs because OCF. Maybe even yeeting vcore to get that 5ghz uncore on true ambient. https://hwbot.org/submission/4790748 With all those tweaks combined, even if you can't bump mem freq because of IMC limit, I feel you could probably beat my SP32M result. I believe your combined OS efficiency and waza boost are superb.

Let's drop a little more

ignore, typo

Congratulations! Awesome results!

Not gonna lie, this is cursed AF

Price drop

Phone got screwed up, need these gone. Y'all got any offers?