Noxinite

Bump

What's changed? Soldered now??

PMed

I'm having issues with OCP with this controller. The card is a Sapphire Xtreme 5850. I reduced the resistances of all the ISEN pins (1-4) to disable the per-phase OCP, but it doesn't seem to have helped. I still get shutdown and 0V until I cycle power. It's definitely not OVP as GPUPI is fine. Anyone have any experience?

This seems fun, maybe I'll buy some boards to play with.

Err, 2.4V probably okay on D9s or Samsung only.

Yeah, I popped it somehow - maybe moisture?? The orange area is ground and the raised areas have the same resistance as the outputs of the mem chokes (in my case).

I assume no Coffee bioses?

I has pics.

You can dremel it off and replace it was other caps if you have a really steady hand, haha. The board I did that on did randomly die some time later though.

Awesome!

Early Christmas present. Seems X14c is what one of the bioses on the board is flashed with, so I don't actually have it. .14d

I have the x14c and x14d bioses IIRC, don't know if they work for non-k OC though. Kabylake definitely works. It would be awesome if someone modded it for Coffee though.

Great score! There were no +700MHz results for ages and now 3 in a few weeks. XD

Sweeeet!

I better get some LN2. :P

With our powers combined...

Awesome! What NB volts/temps? I was around 1.7V and not sure on temp -40 to -50C.

Bump

Bump.

Also, it's 3:5, so it's actually running 1191C5. Which hypers can do easy. Still a nice run though, the SS must be strong to hold the temps!

Bump.

Nice chip.

?

I found some G.Skill G-die on Brainpower PCB (I think) and quick POST voltage testing seems to show they are better than all 14 of the 2GB OEM sticks I binned. XD They needed 1.88V and 1.91V to POST 2800C9 tight. No 32M passes yet though, idk wtf is going on.