Sparks.nl

Yes, much better...

I saw it on Amazon as well. Same story. I can't order outside of the US.

Does anybody have an idea how to order Asrock z170m ocf in Europe?

He meant will him :)

About the temps. I used my Cascade so temps were somewhere between -88C and -100C. (I needed to warm up sometimes because of the CBB at -91,5C)

Thanks Knowing that this cpu when I bought it should have been the 920. To my surpise it was a 930.

This run was it's first (short) run below zero Celsius. I wonder how high it can go.

Thanks I actually had it on realtime in taskmanager. I will do a short run with my 930 first. It should do similar to this, has never been on cold.

Yes, your board and cpu. I forgot to tighten the screws after the cold was on it so it should be able to a do a little better. Oh, in the image the start button can't be seen because I minimized it.

Hoe bedoel je? Dit was boot, naar Windows en draaien maar. Hij moet nog iets harder kunnen, de mount kan iets beter. Ik was vergeten aan te draaien nadat de kou er op kwam. Bij het er af halen zag ik dat hij niet overal 100% contact maakte. Ik ga nu eerst met de 930 verder, die draait op water vergelijkbaar. Met een goede mount moet ik top 3 kunnen scoren.

Kensington:

Lekker bezig! Great job (other score as well)

I will, I will go most out of it on LN2 because it has a cbb at 80C. Because of the bad mount I could go lower with the valve of the Cascade. The last time -89C was the warmest it would go.

It should be, Roger tested it at 5900/5300 hwbot prime stable. 1,55v

Yes, it should be able to run 5900/5300 (1,55v). The Cascade can go to -100C with a good mount. How is it?

I would prefer Slayer then...

Not even 2T?

I tested in slot 4 only. I think I will try to give a little more volts on vccio and vccsa. those settings are still set for my other set. (Which does do 1T)

Thank you for your quick reply. I noticed something. They do 1T on the same voltages if I use just 1 stick in stead of 2. How can this be? Is that imc?

I have got a new (jan 2016) G.Skill 3600 C16 kit. It does 3866MHz C12-12-12-28 with 1.72v (bios, Asrock overvolt) and XTU (Win 8.1) as a kit. But... It can not boot 1T for 3866MHz I have 2 questions: 1. Does it hit on performance verry much? (it seems to affect it) I did a quick test on 5GHz and got 1768 XTU where I do 1785 on these settings with the other kit) 2. Is this common with other kits? (only 2T boot) 3600MHz C12 does work with 1T.

Armin van Buuren feat. Kensington - Heading Up High:

P5ych0 Your inbox seems to be full

Sold, thread can be moved.

Question: are the 4GHz b die Trident Z sets better then 3600 versions?

On hold, probably sold. No news tommorrow then sold.