MaddMutt

No Picture of your Rig?????

Nice :)

Is that RED Coolent or RED tubing??? Great Run :)

How do you like your new toy :)

Did you run this setup because you FORGOT (rofl) how long ago you had benched it. :) How much dust did you have to remove before you could run it??

I overlooked that you did this on a Modded z170...ASUS--AsRock--Gigabyte. Please tell us which one was used...z170m OCF??? This elevates it to Awesome Statues...Salute :)

Looks like you are doing what I did last month :) Run some of your older cards with a better CPU and better your score from the last time :) Nice :)

AweSome Dude.

That's a awesome benching setup you have made :)Great work on the modding also :)

When do you plan on get around to putting some cold on that card??? When you do, make sure you have the AB voltage tweak running for more V power on the 290x's :) Good Score :)

I have to like this SUB :) That is some insane work done on that HD-7950.

I LOVE the Fluke that he has. I want one :)

What is your next 3D Bench that you are going to CRUSH :) That is a Awesome Chip Did you have to de-lid it or Did you hit the Silicon Lottery??

Are you trying to burn the house down????

Very Nice Score :) I'm hoping to be able to bench with my 3x HD-5870's. I have 2x ATI(Reference Design)and a ASUS Matrix (Which is not wanting to play with GPU Tweak 2 and Voltage over 1.2) :(

Excellent Work. I don't have a working 4th board to compete with you :( I have just finished a re-bench of 2x HD-5870's and will run a 3x setup later.

Keep it rolling ikki. With that i9-9900k + HD-5850 you will have TOP GPU Scores in all the 3D benches :)

Please MAKE sure that the legacy version is also counted. It blows BIG chunks when you see XX video card with 25 points but the current version no longer supports THAT video card. IE- NVidia GTX-2xx - GTX-5xx/6xx IIRC

I'm not EVEN in the same room as Spave when it comes to HW, Points, Being Elite, Well Know, Ect, Ect. We ALL take a risk when we Overclock something. CPU, GPU, Memory, Motherboard, Ect, Ect. If you are not willing to lose a piece of HW when OCing, then don't OC it. If to be 1st with a i9-9900k at 8GHz is to run it with 2.15v using LHE, that is you. If it breaks, don't whine about it. You know full well that Hardware can and will break. If you lost the i7-7700k while running x264 4k, where you trying for a World Record or a Top Score?? The CPU's that where lost to x265 4k, where they being push to finish within the top 10??? I have several sets of G.Skill memory but I'm not willing to find out if they will run at DDR4-4000+ at 12-12-28 1t. If you have a set and you fry them, is it your Fault or the Bench SW that you where running?? I broke my i7-8700k {De-Lidded) that was working in my ASrock z170 OCF motherboard. Is it ASrocks/Splaves fault that it broke or My Own for modding it so that it would work/run in a z170 motherboard. My wife coined a saying for what I do to simplify the explaining. It's like NASCAR but with computers Thank You For Your Time

How many days did it take to find the right settings :) Awesome work from a single DDR4-2400 Memory Stick

Good Run...BUT your Video Card Crashed :( That's why the Score is listed as invalid. Also you list speed @ 1237.00 Core/1590 Mem BUT GPU-Z shows card is running at stock speed @ 1040 Core/1300 Mem. Lower the clocks and try again.

Thank You M_R

I would love to learn how you got this to run on current AMD GPU. Awesome job on getting it to work :)

I have a question that has not been answered by KPC yet. I do not feel that it's their fault as they must first either get the board and verify a problem or ask several owners to verify if there is a problem. I currently own 2 ASRock Z170 OCF motherboards and have one setup for Dice benching. I purchased the motherboards during the Team Competition 2018 a few months ago. The Motherboards are Rev 1.03. I have a problem with mounting my older KPC F1 Dark and I hope someone else has been able to find a simple solution. I installed the F1 Dark for my benching of my i3-6320 for the Team Cup. While installing the Back Plate/Rods through the mounting holes, it did not want to line up. The back plate did not slide smoothly during installation nor sit flush with the motherboard. I had the feeling that if I tightened the screws on the Hold Down Plate that I would crack or break the motherboard. I would gladly buy the "New Mounting Hardware" at KPC if this would solve my problem. Other than the AM4 compatibility, it looks identical to the one I have. Is it just me being to cautious on properly mounting my F1?? Would it be easier to just purchased a New Cooler from KPC?? Thank You For Your Time And Assistance

Great Run...I can't wait until you take it cold :)