MaddMutt

AweSome Dude.

That's a awesome benching setup you have made :)Great work on the modding also :)

When do you plan on get around to putting some cold on that card??? When you do, make sure you have the AB voltage tweak running for more V power on the 290x's :) Good Score :)

I have to like this SUB :) That is some insane work done on that HD-7950.

I LOVE the Fluke that he has. I want one :)

What is your next 3D Bench that you are going to CRUSH :) That is a Awesome Chip Did you have to de-lid it or Did you hit the Silicon Lottery??

Are you trying to burn the house down????

Very Nice Score :) I'm hoping to be able to bench with my 3x HD-5870's. I have 2x ATI(Reference Design)and a ASUS Matrix (Which is not wanting to play with GPU Tweak 2 and Voltage over 1.2) :(

Excellent Work. I don't have a working 4th board to compete with you :( I have just finished a re-bench of 2x HD-5870's and will run a 3x setup later.

Keep it rolling ikki. With that i9-9900k + HD-5850 you will have TOP GPU Scores in all the 3D benches :)

How many days did it take to find the right settings :) Awesome work from a single DDR4-2400 Memory Stick

Good Run...BUT your Video Card Crashed :( That's why the Score is listed as invalid. Also you list speed @ 1237.00 Core/1590 Mem BUT GPU-Z shows card is running at stock speed @ 1040 Core/1300 Mem. Lower the clocks and try again.

Thank You M_R

I would love to learn how you got this to run on current AMD GPU. Awesome job on getting it to work :)

I have a question that has not been answered by KPC yet. I do not feel that it's their fault as they must first either get the board and verify a problem or ask several owners to verify if there is a problem. I currently own 2 ASRock Z170 OCF motherboards and have one setup for Dice benching. I purchased the motherboards during the Team Competition 2018 a few months ago. The Motherboards are Rev 1.03. I have a problem with mounting my older KPC F1 Dark and I hope someone else has been able to find a simple solution. I installed the F1 Dark for my benching of my i3-6320 for the Team Cup. While installing the Back Plate/Rods through the mounting holes, it did not want to line up. The back plate did not slide smoothly during installation nor sit flush with the motherboard. I had the feeling that if I tightened the screws on the Hold Down Plate that I would crack or break the motherboard. I would gladly buy the "New Mounting Hardware" at KPC if this would solve my problem. Other than the AM4 compatibility, it looks identical to the one I have. Is it just me being to cautious on properly mounting my F1?? Would it be easier to just purchased a New Cooler from KPC?? Thank You For Your Time And Assistance

Great Run...I can't wait until you take it cold :)

That's a very nice chip. How much do you want for it :) Ha Ha You are going to have some beautiful scores from that chip :)

Windows 10 Not allowed?? I thought that had been fixed.

I know this may sound dumb but someone will always try to read between the lines. The Y-Cruncher bench has the CPU listed as "Use 4 Cores in Total". This would imply that you can use an 8 Core CPU BUT disable 4 of the Cores.

Nice Run :) When do you plan on taking the setup COLD??

Nice Run :) Is that with the new CPU POT??

Sweet Run :) How do the others clock??

In your DDR3/DDR4 benches, YOU have specified 1 card/1 GPU. Is the 9800 GX2 allowed as an SLI enabled card??

I realized later that I had failed to have the proper background. I reran the bench the next day with the proper back ground and my score improved from a 999 @4.2 to 1029 @4.3

Very Nice :) As said before..I'll have to take mine cold also. Did you have to do any mods on the video card?? There is a capacitor that looks like it would be in the way of an LN2 pot.