New Socket A memory frequency record. Well done!

Wow really well done, I thought I might be able to get 280 out of mine but I don't think I'll be able to touch this. GJ!!!

You're making it look way too easy

It is easy, indeed. Anyone with TCCD can do it on a suitable board.

This NF7-S is not even modded.

I have plenty of TCCD, just finding a stick that is still working is the issue

I can't believe no one thought before about running TCCD asynchronously on nforce2 nice result, anyway

Async should be pretty inefficient for benchmarks

Other than max mem frequency, async and TCCD is not very good on NF2, thats why no one has done it.

 

Also, I remember seeing 300 sync with bh-5 on ultra-b

 

Edit: I take that back, 300 was probably on NF4, but Lastviking had around 285 on NF2 at least

Edited June 2, 201410 yr by Marquzz

I can't get anything but 1:1 to work on LanParty NFII Ultra-B.

I got the same result with DFI, so you're doing it wrong

Btw, max on the nforce2 seems to be 300MHz, just like the FSB max.

These 0.7MHz is the bonus I got

Edited June 3, 201410 yr by I.nfraR.ed

What BIOS you were using on the DFI?

Yes Ivan, I do everything wrong

I still can't get anything but 1:1 to work! I only have 512 MB sticks though

Yes Ivan, I do everything wrong

I still can't get anything but 1:1 to work! I only have 512 MB sticks though

Don't use an Ultra B, unless you're into bios corruption. Mine does the same thing.

AN7 or NF7 is the way to go.

Yes, I read about the BIOS corruption, but haven't had anything happen I couldn't recover from. Sometimes it takes a few tries to get it to POST again, but after that its okay.

 

All I have is an Ultra B so it's kind of DFI or die.

But I managed to corrupt mine in 15 minutes or so

I have to reflash the chip and can show you that I can do it on the DFI too.

If you could give away your secrets that would be great.

I tried all 3 slots, CL 2, 2.5 and CL3, lax tFC/tRFC, board won't post outside 1:1 and in 1:1 over 262 MHz FSB.

Max mem clock on nf2 ... eh ?

 

I believe it's not only a matter of board and bios ... it seems to be cpu dependant too.

 

I have different results on the same mobo (epox 8rda3) with different cpu's

NB dependent too?

 

Memory controller is in the NF2.