I.nfraR.ed - DDR SDRAM @ 300.7MHz - 300.7 MHz Memory Clock

[Don_Dan]

New Socket A memory frequency record. Well done!

[ObscureParadox]

Wow really well done, I thought I might be able to get 280 out of mine but I don't think I'll be able to touch this. GJ!!!

[TaPaKaH]

You're making it look way too easy

[I.nfraR.ed]

It is easy, indeed. Anyone with TCCD can do it on a suitable board.

This NF7-S is not even modded.

[ObscureParadox]

I have plenty of TCCD, just finding a stick that is still working is the issue

[phobosq]

I can't believe no one thought before about running TCCD asynchronously on nforce2 nice result, anyway

[Massman]

Async should be pretty inefficient for benchmarks

[Marquzz]

Other than max mem frequency, async and TCCD is not very good on NF2, thats why no one has done it.

 

Also, I remember seeing 300 sync with bh-5 on ultra-b

 

Edit: I take that back, 300 was probably on NF4, but Lastviking had around 285 on NF2 at least

Edited June 2, 2014 by Marquzz

[BeepBeep2]

I can't get anything but 1:1 to work on LanParty NFII Ultra-B.

[I.nfraR.ed]

I got the same result with DFI, so you're doing it wrong

Btw, max on the nforce2 seems to be 300MHz, just like the FSB max.

These 0.7MHz is the bonus I got

Edited June 3, 2014 by I.nfraR.ed

[phobosq]

What BIOS you were using on the DFI?

[BeepBeep2]

Yes Ivan, I do everything wrong

I still can't get anything but 1:1 to work! I only have 512 MB sticks though

[Mr.Scott]

Yes Ivan, I do everything wrong

I still can't get anything but 1:1 to work! I only have 512 MB sticks though

Don't use an Ultra B, unless you're into bios corruption. Mine does the same thing.

AN7 or NF7 is the way to go.

[BeepBeep2]

Yes, I read about the BIOS corruption, but haven't had anything happen I couldn't recover from. Sometimes it takes a few tries to get it to POST again, but after that its okay.

 

All I have is an Ultra B so it's kind of DFI or die.

[I.nfraR.ed]

But I managed to corrupt mine in 15 minutes or so

I have to reflash the chip and can show you that I can do it on the DFI too.

[BeepBeep2]

If you could give away your secrets that would be great.

I tried all 3 slots, CL 2, 2.5 and CL3, lax tFC/tRFC, board won't post outside 1:1 and in 1:1 over 262 MHz FSB.

[TASOS]

Max mem clock on nf2 ... eh ?

 

I believe it's not only a matter of board and bios ... it seems to be cpu dependant too.

 

I have different results on the same mobo (epox 8rda3) with different cpu's

[Massman]

NB dependent too?

 

Memory controller is in the NF2.